Last modified by Hera Guo on 2025/06/10 15:14
From version 24.3
edited by Hera Guo
on 2025/06/08 18:04
Change comment: There is no comment for this version
To version 11.3
edited by Hera Guo
on 2025/05/28 15:43
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -Outdoor & Indoor signal measuring Solution End User Guide V1.2
1 + Outdoor & Indoor signal measuring Solution End User Guide V1.1
Content
... ... @@ -4,13 +4,13 @@
4 4  
5 5  == **1.1 What is Outdoor & Indoor signal measuring Solution?** ==
6 6  
7 -To help customers identify optimal sensor placement locations, we have designed a one-click signal strength measurement solution. You only need an **LA66 USB LoRaWAN Adapter **and a **Dragino account**.
7 +To help customers identify optimal sensor placement locations, we have designed a one-click signal strength measurement solution. All you need is one **LA66 USB LoRaWAN Adapter **and a **Dragino account**.
8 8  
9 -The** outdoor signal measurement** **solution **supports simultaneous testing with multiple gateways. It allows for both individual gateway signal map displays and combined overlays from multiple gateways.
9 +The **outdoor signal measurement solution** supports simultaneous testing with multiple gateways. It allows for both individual gateway signal map display and combined signal overlay from multiple gateways.
10 10  
11 -For **indoor signal measurement solution **, due to the complex layout and numerous obstacles, the solution adopts manual coordinate marking instead of relying on unstable mobile device positioning.
11 +For **indoor signal measurement**, due to the complex layout and numerous obstacles, the user needs to walk to a suitable location before starting the measurement. Measurement points can then be marked on an indoor map, with flexible options to add or remove markers.
12 12  
13 -Both dashboards support data export.
13 +Both dashboards support **data export**.
14 14  
15 15  
16 16  ----
... ... @@ -18,8 +18,8 @@
18 18  
19 19  == **1.2 Features ** ==
20 20  
21 -* **Extensive support**
22 -** Only a LA66 USB LoRaWAN Adapter** **and one Dragino account are needed, the gateway and LNS can be freely matched.**~/~/格式已修正**
21 +* Extensive support
22 +** Only one LA66 USB LoRaWAN Adapter** **and one Dragino account are needed, and the gateway and LNS can be freely matched **High Precision Measurement~/~/格式已修正**
23 23  ** High-accuracy sensors
24 24  ** Reliable data readings
25 25  * **Real-Time measuring**
... ... @@ -32,9 +32,8 @@
32 32  
33 33  == **1.3 Specifications ** ==
34 34  
35 -* **Mobile Support:** [[Dedicated mobile app for on-the-go monitoring>>https://www.dropbox.com/scl/fo/qdiwkpcxc03qu2r2w0g46/AKqR2FByUdkoWZPZh-diYfQ?rlkey=t1a1kwlvr93c1459mz9jifers&e=1&st=kji4rdg0&dl=0]]
36 -* **Device Manual:** [[LA66 USB LoRaWAN Adapter User Manual>>https://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20USB%20LoRaWAN%20Adapter%20User%20Manual/]]
37 -* **Dragino APP: **[[https:~~/~~/www.dropbox.com/scl/fo/qdiwkpcxc03qu2r2w0g46/AKqR2FByUdkoWZPZh-diYfQ?rlkey=t1a1kwlvr93c1459mz9jifers&st=kji4rdg0&dl=0>>https://www.dropbox.com/scl/fo/qdiwkpcxc03qu2r2w0g46/AKqR2FByUdkoWZPZh-diYfQ?rlkey=t1a1kwlvr93c1459mz9jifers&st=kji4rdg0&dl=0]]
35 +* **Mobile Support: [[Dedicated mobile app for on-the-go monitoring>>https://www.dropbox.com/scl/fo/qdiwkpcxc03qu2r2w0g46/AKqR2FByUdkoWZPZh-diYfQ?rlkey=t1a1kwlvr93c1459mz9jifers&e=1&st=kji4rdg0&dl=0]]**
36 +* **Device Manual: [[LA66 USB LoRaWAN Adapter User Manual>>https://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20USB%20LoRaWAN%20Adapter%20User%20Manual/]]**
38 38  
39 39  ----
40 40  
... ... @@ -67,11 +67,10 @@
67 67  2.Burn bootloader & firmware for LA66 USB LoRaWAN Adapter
68 68  
69 69  * **Bootloader: **We ship the LA66 USB LoRaWAN Adapter with a boot loader by default( More detail: [[https:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20USB%20LoRaWAN%20Adapter%20User%20Manual/#H1.10A0UpgradeFirmwareofLA66USBLoRaWANAdapter:~~~~:text=is%20as%20below%3A-,1.10%C2%A0%20Upgrade%20Firmware%20of%20LA66%20USB%20LoRaWAN%20Adapter,-1.10.1%20Update%20method>>https://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20USB%20LoRaWAN%20Adapter%20User%20Manual/#H1.10A0UpgradeFirmwareofLA66USBLoRaWANAdapter:~~:text=is%20as%20below%3A-,1.10%C2%A0%20Upgrade%20Firmware%20of%20LA66%20USB%20LoRaWAN%20Adapter,-1.10.1%20Update%20method]])
70 -* **Firmware:** If your device didn't have bootloader or firmware, please burn the latest bootloader & firmware for it in the following way: [[https:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20USB%20LoRaWAN%20Adapter%20User%20Manual/#H1.10A0UpgradeFirmwareofLA66USBLoRaWANAdapter:~~~~:text=20model/%23H3.2.1UpdateafirmwareviaDraginoSensorManagerUtility.exe-,1.10.2%20Update%20method%3A%C2%A0For%20LA66%20without%20bootloader,-Explanation%3A>>https://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20USB%20LoRaWAN%20Adapter%20User%20Manual/#H1.10A0UpgradeFirmwareofLA66USBLoRaWANAdapter:~~:text=20model/%23H3.2.1UpdateafirmwareviaDraginoSensorManagerUtility.exe-,1.10.2%20Update%20method%3A%C2%A0For%20LA66%20without%20bootloader,-Explanation%3A]]
69 +* **Firmware:** If your device didn't have bootloader, please  burn a bootloader for it in the following way: [[https:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20USB%20LoRaWAN%20Adapter%20User%20Manual/#H1.10A0UpgradeFirmwareofLA66USBLoRaWANAdapter:~~~~:text=20model/%23H3.2.1UpdateafirmwareviaDraginoSensorManagerUtility.exe-,1.10.2%20Update%20method%3A%C2%A0For%20LA66%20without%20bootloader,-Explanation%3A>>https://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20USB%20LoRaWAN%20Adapter%20User%20Manual/#H1.10A0UpgradeFirmwareofLA66USBLoRaWANAdapter:~~:text=20model/%23H3.2.1UpdateafirmwareviaDraginoSensorManagerUtility.exe-,1.10.2%20Update%20method%3A%C2%A0For%20LA66%20without%20bootloader,-Explanation%3A]]
71 71  
72 72  **--Ensure that all devices are pre-registered on Dragino before use~/~/移至章末另起一节--**
73 73  
74 -
75 75  ----
76 76  
77 77  == **2.3 Register Devices & Gateways on LNS** ==
... ... @@ -78,12 +78,12 @@
78 78  
79 79  === **2.3.1 Register Device** ===
80 80  
81 -**1.Have a check of package box to get DEVEUI/ APPEUI/ APPKEY(OTTAKEY)**
79 +1.Have a check of package box to get DEVEUI/ APPEUI/ APPKEY(OTTAKEY)
82 82  
83 83  [[image:1747970430695-168.jpg||height="510" width="852"]]
84 84  
85 85  
86 -**2.Register on LNS and replace decoding**
84 +2.Register on LNS and replace decoding
87 87  
88 88  * **Decoding for ChirpStack:**
89 89  
... ... @@ -102,7 +102,7 @@
102 102   var data = {};
103 103   if (bytes.length >= 9) {
104 104   data.flag = bytes[0];
105 -data.Node_type = "Dragino_Mapper";
103 +data.Node_type = "Caculate AVG";
106 106   data.latitude = parseFloat(((bytes[1] << 24 >>> 0 | bytes[2] << 16 | bytes[3] << 8 | bytes[4]) / 1e6).toFixed(6));
107 107   data.longitude = parseFloat(((bytes[5] << 24 >>> 0 | bytes[6] << 16 | bytes[7] << 8 | bytes[8]) / 1e6).toFixed(6));
108 108  
... ... @@ -154,7 +154,7 @@
154 154   }
155 155   else if(bytes.length==9){
156 156   data.doorflg = doorflg
157 - data.Node_type = "Dragino_Mapper"
155 + data.Node_type = "Caculate AVG"
158 158   data.latitude=parseFloat(((bytes[1]<<24|bytes[2]<<16|bytes[3]<<8|bytes[4])/1000000).toFixed(6));
159 159   data.longitude=parseFloat(((bytes[5]<<24|bytes[6]<<16|bytes[7]<<8|bytes[8])/1000000).toFixed(6));
160 160   return data;
... ... @@ -166,17 +166,12 @@
166 166  
167 167  === --**2.2.2 Register Gateway(If you use Dragino's gateway)~/~/删除网关配置介绍**-- ===
168 168  
169 -
170 -
171 171  ----
172 172  
173 173  == **2.4  LNS Connection Method~/~/已更新标题** ==
174 174  
175 -**Choose LNS: **After log in Dragino platform, click the button "Import-Dragino-map"and choose the LNS you using.
171 +**Choose LNS: **After log in Dragino platform, click the button "Import-Dragino-map"and choose the LNS you using.[[image:1747971716633-666.png||height="487" width="654"]]
176 176  
177 -[[image:1747971716633-666.png||height="487" width="654"]]
178 -
179 -
180 180  ----
181 181  
182 182  (((
... ... @@ -186,45 +186,40 @@
186 186  
187 187  **Account & Passwork:** Imput your TTN account and password to use API port.
188 188  
189 -**MQTT Address: **Imput public address** (Don't imput Port)**
190 -
191 -
182 +**MQTT Address: **Imput public address (Don't imput Port)
192 192  )))
193 193  
194 194  ----
195 195  
196 -**Example of ChirpStack**~/~/已增添详细文字说明
187 +**Example of ChirpStack**~/~/已增添详细文字说明[[image:1747972538335-599.png]]
197 197  
198 -[[image:1749375906728-208.png]]
199 -
200 200  **MQTT Address: **Your MQTT server address or the cloud server address you use
201 201  
202 202  **Subscribe Topic: **The default for Topic is:  application/**chirpstack application id**/device/+/event/up(Replace"**chirpstack application id**" with the one which is actually used)
203 203  
204 -**SSL Certificates: ** Copy the contents of the certificates and paste them into the linked file below, a total of three certificates are required(Integrated Certificate File demo Download: [[Demo.pem>>attach:demo.pem]])
193 +**SSL Certificates: ** Copy the contents of the certificates and paste them into the linked file below, a total of three certificates are required(Integrated Certificate File demo Download Address: [[https:~~/~~/github.com/ThingsEye-io/te-platform/tree/main/chirpstack>>url:https://github.com/ThingsEye-io/te-platform/tree/main/chirpstack]])
205 205  
206 -
207 207  ----
208 208  
209 -**Check:**Whether the device is connected to the platform through LNS~/~/新增自检教学，避免后续额外工作量
197 +**Check:**Whether the device is connected to the platform through LNS
210 210  
211 -[[image:1748602571865-850.png]]
199 +[[image:1748417055367-336.png]]
212 212  
201 +----
213 213  
214 - Whether the device profile is Dragino_Mapper? Modifyit if not.
203 +**Check:** Whether the device profile is Caculate AVG. Change it if it not.
215 215  
216 216  [[image:1748416951693-709.png]]
217 217  
218 -👇
207 +[[image:1748417025235-726.png]]
219 219  
220 -[[image:1749376046690-863.png]]
221 -
222 222  ----
223 223  
224 224  
212 +
225 225  = **3. How To Use?~/~/图片显示问题已修复，硬件使用方法已放到小节头(即插即用，自动判断室内外)** =
226 226  
227 -== **3.1 Outdoor_Mapper dashboard** ==
215 +== **3.1 Outdoor_signal dashboard** ==
228 228  
229 229  Outdoors_signal supports viewing both the signal coverage of a single gateway and the combined coverage of all gateways.
230 230  
... ... @@ -235,31 +235,73 @@
235 235  **This solution is pre-configured. Under normal circumstances, when the device successfully uploads information through gateways, it will automatically generate the corresponding assets and put them in the Layer.**
236 236  
237 237  (% class="wikigeneratedid" %)
238 -The layer will be named after the gateway's IMEI, and you can set a label. At the same time, there will be a dashboard that collects all gateway signals and displays them in an overlay named after the user's registered email address.(Such like :All_signal:$[customer_email])
226 +The layer will be named after the gateway's IMEI, and you can set a label. At the same time, there will be a dashboard that collects all gateway signals and displays them in an overlay named after the user's registered email address.
239 239  
228 +
229 +(% class="wikigeneratedid" %)
230 +**The following are special cases：**
231 +
232 +(% class="wikigeneratedid" id="HClickthecenterbuttonontherighttoaddagatewaylayer.28PleasecreatealldevicesthatcanacceptthecurrentLA66frequencyband3Botherwise2Cthereceiveddatawillnotbedisplayed.29" %)
233 +**1.Can't see new gateway layers:**
234 +
235 +(% class="wikigeneratedid" %)
236 +Click the center button on the right to add a gateway layer. (Please create all devices that can accept the current LA66 USB LoRaWAN Adapter frequency band; otherwise, the received data will not be displayed.)
237 +
238 +For example, here we created a gateway with the ID a84041fdfe27e8fa
239 +
240 +You can click here to modify the gateway layer ID (it must correspond one-to-one with the gateway ID that will receive the data).
241 +
242 +[[image:1748226933887-176.png||height="279" width="232"]]👉[[image:1748226941899-789.png||height="308" width="896"]]
243 +
240 240  ----
241 241  
242 -Click row of gateway layer will turn to the detail page.
246 +By the way, you can click here to delete the gateway layer.
243 243  
244 -[[image:1749376107488-669.png]]👉 [[image:1748603053572-488.png||height="644" width="672"]]
248 +[[image:1748226990199-388.png]]
245 245  
246 246  
247 247  ----
248 248  
253 +Click row of gateway layer will turn to the detail page, this page will be blank before gateway upload data.
254 +
255 +[[image:1748227035403-882.png||height="487" width="196"]]👉 [[image:1748227056061-411.png||height="655" width="891"]]
256 +
257 +----
258 +
249 249  Click the top-left corner to return.
250 250  
251 251  [[image:1748227163443-264.png]]
252 252  
263 +----
253 253  
265 +**2.Can't see new gateway layers, and displayed "**Asset with such name already exists!**":**
266 +
267 +**Turn to Assets to have a check weather it profiles is "**Outdoors_signal**" or "**AL_Zone**" .**
268 +
269 +[[image:1748418008638-728.png]]
270 +
254 254  ----
255 255  
256 -=== **3.1.2 Measuring~/~/图片需要替换** ===
273 +If not, have a set.
257 257  
258 -Insert the LA66 USB LoRaWAN Adapter into phone or tablet. Data will be uploaded every 7 seconds based on the tablet's location. Simply move the tablet to measure signal strength from different places.
275 +[[image:1748418120064-329.png]]
259 259  
277 +[[image:1748418142794-272.png]]
278 +
279 +----
280 +
281 +=== **3.1.2 Measuring** ===
282 +
283 +Insert the LA66 USB LoRaWAN Adapter into phone or tablet, press the button to switch to ON and start detection. Click the button in the top-right corner of the main page to start receiving data. Data will be uploaded every 6 seconds based on the tablet's location. Simply move the tablet to measure signal strength from different places.
284 +
260 260  [[image:1748243979452-223.jpg||height="495" width="661"]]
261 261  
287 +[[image:1748227286978-688.png||height="149" width="660"]]
262 262  
289 + 👇
290 +
291 +[[image:1748227303533-598.png||height="151" width="661"]]
292 +
263 263  ----
264 264  
265 265  When the gateway received the first set of data, the current gateway will appear in the left-side list of the gateway interface. When received the second set of data, the current signal strength will be displayed on the right-side map.
... ... @@ -266,9 +266,8 @@
266 266  
267 267  The measured data will be displayed in translucent dots of different colors, green represents a good signal, and red represents a poor signal.
268 268  
269 -[[image:1748601795657-856.png||height="632" width="663"]]
299 +[[image:1748227348704-578.png||height="360" width="663"]]
270 270  
271 -
272 272  ----
273 273  
274 274  You can click here to edit the device remarks.
... ... @@ -275,26 +275,43 @@
275 275  
276 276  [[image:1748227380372-654.png||height="509" width="659"]]
277 277  
307 +----
278 278  
309 +You can click here to delete the device (deletion is irreversible, please proceed with caution).
310 +
311 +[[image:1748227409566-450.png||height="443" width="659"]]
312 +
279 279  ----
280 280  
281 -All data collected by the gateways will also be displayed in the layer which named customer's E-mail simultaneously.
315 +All data collected by the gateways will also be displayed in All_signal simultaneously.
282 282  
283 -[[image:1749376404143-588.png]]
317 +[[image:1748227432762-994.png||height="478" width="660"]]
284 284  
285 285  ----
286 286  
321 +=== **3.1.3 Turn OFF to stop measuring** ===
287 287  
288 -== **3.2 Indoors_Mapper dashboard** ==
323 +Once the current location's detection is complete, press the button again to switch to OFF and pause detection.
289 289  
325 +[[image:1748227523105-709.png||height="150" width="649"]]
326 +
327 + 👇
328 +
329 +[[image:1748227534764-184.png||height="147" width="649"]]
330 +
331 +----
332 +
333 +
334 +== **3.2 Indoors_signal dashboard** ==
335 +
290 290  Indoors_signal supports measuring and marking the signal strength of all locations on the indoor floor plan.
291 291  
292 292  
293 293  === **3.2.1 Import the map** ===
294 294  
295 -Drag the map image here and click √ to import.**(Only supports SVG format)**
341 +Drag the map image here and click √ to import.
296 296  
297 -[[image:1749376507835-691.png]]
343 +[[image:1748241600796-653.png||height="481" width="652"]]
298 298  
299 299  
300 300  ----
... ... @@ -308,17 +308,22 @@
308 308  
309 309  ----
310 310  
311 -2.Move to the measurement point, insert the LA66 USB LoRaWAN Adapter , then you can see the new data renewing.**~/~/图片需要替换**
357 +2.Move to the measurement point, insert the LA66 USB LoRaWAN Adapter , and press the button to switch to ON, then you can see the new data renewing.
312 312  
359 +[[image:1748229559964-501.png||height="401" width="733"]]
313 313  
314 -
315 315  ----
316 316  
317 -3.Mark the next place which to be measured than move to the measurement point.Repeat the above steps to measure**(Remeber: Mark point before move.**)
363 +3.Mark the next place which to be measured than move to the measurement point.Repeat the above steps to measure(**Remeber: Mark point before move.**)
318 318  
319 319  [[image:1748229639368-109.png||height="605" width="820"]]
320 320  
367 +----
321 321  
369 +4.Click button to Off to stop measuring.
370 +
371 +[[image:1748229757097-872.png||height="232" width="736"]]
372 +
322 322  ----
323 323  
324 324  === **3.2.3 Delete point** ===
... ... @@ -325,9 +325,8 @@
325 325  
326 326  Click the marking points, then click yes.
327 327  
328 -[[image:1749376586844-796.png]]
379 +[[image:1748229833594-993.png||height="320" width="735"]]
329 329  
330 -
331 331  ----
332 332  
333 333  
1748482052834-585.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.hera
Size
... ... @@ -1,1 +1,0 @@
1 -197.4 KB
Content
1748482145587-587.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.hera
Size
... ... @@ -1,1 +1,0 @@
1 -344.5 KB
Content
1748601432759-282.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.hera
Size
... ... @@ -1,1 +1,0 @@
1 -32.9 KB
Content
1748601500104-639.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.hera
Size
... ... @@ -1,1 +1,0 @@
1 -761.0 KB
Content
1748601609894-341.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.hera
Size
... ... @@ -1,1 +1,0 @@
1 -139.2 KB
Content
1748601692184-985.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.hera
Size
... ... @@ -1,1 +1,0 @@
1 -141.9 KB
Content
1748601714123-652.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.hera
Size
... ... @@ -1,1 +1,0 @@
1 -144.4 KB
Content
1748601795657-856.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.hera
Size
... ... @@ -1,1 +1,0 @@
1 -685.2 KB
Content
1748602283686-496.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.hera
Size
... ... @@ -1,1 +1,0 @@
1 -232.9 KB
Content
1748602304586-198.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.hera
Size
... ... @@ -1,1 +1,0 @@
1 -218.9 KB
Content
1748602461523-537.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.hera
Size
... ... @@ -1,1 +1,0 @@
1 -51.2 KB
Content
1748602571865-850.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.hera
Size
... ... @@ -1,1 +1,0 @@
1 -50.8 KB
Content
1748602603331-559.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.hera
Size
... ... @@ -1,1 +1,0 @@
1 -48.6 KB
Content
1748602881431-230.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.hera
Size
... ... @@ -1,1 +1,0 @@
1 -30.8 KB
Content
1748603053572-488.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.hera
Size
... ... @@ -1,1 +1,0 @@
1 -685.3 KB
Content
1748603159913-908.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.hera
Size
... ... @@ -1,1 +1,0 @@
1 -613.1 KB
Content
1749375906728-208.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.hera
Size
... ... @@ -1,1 +1,0 @@
1 -217.3 KB
Content
1749376046690-863.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.hera
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
1749376107488-669.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.hera
Size
... ... @@ -1,1 +1,0 @@
1 -14.0 KB
Content
1749376404143-588.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.hera
Size
... ... @@ -1,1 +1,0 @@
1 -723.5 KB
Content
1749376507835-691.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.hera
Size
... ... @@ -1,1 +1,0 @@
1 -129.3 KB
Content
1749376586844-796.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.hera
Size
... ... @@ -1,1 +1,0 @@
1 -108.6 KB
Content
demo.pem
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.hera
Size
... ... @@ -1,1 +1,0 @@
1 -0 bytes
Content