Last modified by Hera Guo on 2025/06/10 15:14
From version 5.6
edited by Hera Guo
on 2025/05/26 11:24
Change comment: There is no comment for this version
To version 23.8
edited by Hera Guo
on 2025/06/08 17:55
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 - Outdoor & Indoor signal measuring Solution End User Guide
1 +Outdoor & Indoor signal measuring Solution End User Guide V1.2
Content
... ... @@ -1,16 +1,16 @@
1 1  {{toc/}}
2 2  
3 -= **1. Introduction** =
3 += **1. Introduction~/~/名字已修改,以下内容中“LA66”全部替换成“LA66USB LoRaWAN Adapter”** =
4 4  
5 -== **1.1 What is Outdoor & Indoor signal measuring Solution? ** ==
5 +== **1.1 What is Outdoor & Indoor signal measuring Solution?** ==
6 6  
7 -To help customers identify optimal sensor placement locations, we have designed a one-click signal strength measurement solution. All you need is one **LA66 device** and a **Dragino account**.
7 +To help customers identify optimal sensor placement locations, we have designed a one-click signal strength measurement solution. You only need an **LA66 USB LoRaWAN Adapter **and a **Dragino account**.
8 8  
9 -The **outdoor signal measurement solution** supports simultaneous testing with multiple gateways. It allows for both individual gateway signal map display and combined signal overlay from multiple gateways.
9 +The** outdoor signal measurement** **solution **supports simultaneous testing with multiple gateways. It allows for both individual gateway signal map displays and combined overlays from multiple gateways.
10 10  
11 -For **indoor signal measurement**, due to the complex layout and numerous obstacles, the user needs to walk to a suitable location before starting the measurement. Measurement points can then be marked on an indoor map, with flexible options to add or remove markers.
11 +For **indoor signal measurement solution **, due to the complex layout and numerous obstacles, the solution adopts manual coordinate marking instead of relying on unstable mobile device positioning.
12 12  
13 -Both dashboards support **data export**.
13 +Both dashboards support data export.
14 14  
15 15  
16 16  ----
... ... @@ -18,8 +18,8 @@
18 18  
19 19  == **1.2 Features ** ==
20 20  
21 -* Extensive support
22 -** Only one LA66 and one Dragino account are needed, and the gateway and LNS can be freely matched **High Precision Measurement**
21 +* **Extensive support**
22 +** Only a LA66 USB LoRaWAN Adapter** **and one Dragino account are needed, the gateway and LNS can be freely matched.**~/~/格式已修正**
23 23  ** High-accuracy sensors
24 24  ** Reliable data readings
25 25  * **Real-Time measuring**
... ... @@ -32,8 +32,9 @@
32 32  
33 33  == **1.3 Specifications ** ==
34 34  
35 -* **Mobile Support: [[Dedicated mobile app for on-the-go monitoring>>https://www.dropbox.com/scl/fo/qdiwkpcxc03qu2r2w0g46/AKqR2FByUdkoWZPZh-diYfQ?rlkey=t1a1kwlvr93c1459mz9jifers&e=1&st=kji4rdg0&dl=0]]**
36 -* **Device Manual: [[LA66 USB LoRaWAN Adapter User Manual>>https://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20USB%20LoRaWAN%20Adapter%20User%20Manual/]]**
35 +* **Mobile Support:** [[Dedicated mobile app for on-the-go monitoring>>https://www.dropbox.com/scl/fo/qdiwkpcxc03qu2r2w0g46/AKqR2FByUdkoWZPZh-diYfQ?rlkey=t1a1kwlvr93c1459mz9jifers&e=1&st=kji4rdg0&dl=0]]
36 +* **Device Manual:** [[LA66 USB LoRaWAN Adapter User Manual>>https://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20USB%20LoRaWAN%20Adapter%20User%20Manual/]]
37 +* **Dragino APP: **[[https:~~/~~/www.dropbox.com/scl/fo/qdiwkpcxc03qu2r2w0g46/AKqR2FByUdkoWZPZh-diYfQ?rlkey=t1a1kwlvr93c1459mz9jifers&st=kji4rdg0&dl=0>>https://www.dropbox.com/scl/fo/qdiwkpcxc03qu2r2w0g46/AKqR2FByUdkoWZPZh-diYfQ?rlkey=t1a1kwlvr93c1459mz9jifers&st=kji4rdg0&dl=0]]
37 37  
38 38  ----
39 39  
... ... @@ -40,7 +40,7 @@
40 40  
41 41  = **2. How to Build？** =
42 42  
43 -== **2.1 Network Structure** ==
44 +== **2.1 Network Structure~/~/图片已替换** ==
44 44  
45 45  [[image:结构.png]]
46 46  
... ... @@ -56,17 +56,21 @@
56 56  
57 57  ----
58 58  
59 -== **2.2 Get Devices** ==
60 +== **2.2 Get Device And Configuration~/~/新增烧录固件详细说明(一般情况下用出厂自带的默认固件即可)** ==
60 60  
62 +1.Reach out to your local representative to acquire the necessary devices for your signal measuring solution. These devices include:
61 61  
62 -Reach out to your local representative to acquire the necessary devices for your signal measuring solution. These devices include:
63 -
64 -* **End Nodes**: LA66
64 +* **End Nodes:** LA66 USB LoRaWAN Adapter
65 65  * **Gateway(If you want):**For data transmission.
66 66  
67 -Ensure that all devices are pre-registered on **Dragino** before use.
67 +2.Burn bootloader & firmware for LA66 USB LoRaWAN Adapter
68 68  
69 +* **Bootloader: **We ship the LA66 USB LoRaWAN Adapter with a boot loader by default( More detail: [[https:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20USB%20LoRaWAN%20Adapter%20User%20Manual/#H1.10A0UpgradeFirmwareofLA66USBLoRaWANAdapter:~~~~:text=is%20as%20below%3A-,1.10%C2%A0%20Upgrade%20Firmware%20of%20LA66%20USB%20LoRaWAN%20Adapter,-1.10.1%20Update%20method>>https://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20USB%20LoRaWAN%20Adapter%20User%20Manual/#H1.10A0UpgradeFirmwareofLA66USBLoRaWANAdapter:~~:text=is%20as%20below%3A-,1.10%C2%A0%20Upgrade%20Firmware%20of%20LA66%20USB%20LoRaWAN%20Adapter,-1.10.1%20Update%20method]])
70 +* **Firmware:** If your device didn't have bootloader or firmware, please burn the latest bootloader & firmware for it in the following way: [[https:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20USB%20LoRaWAN%20Adapter%20User%20Manual/#H1.10A0UpgradeFirmwareofLA66USBLoRaWANAdapter:~~~~:text=20model/%23H3.2.1UpdateafirmwareviaDraginoSensorManagerUtility.exe-,1.10.2%20Update%20method%3A%C2%A0For%20LA66%20without%20bootloader,-Explanation%3A>>https://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20USB%20LoRaWAN%20Adapter%20User%20Manual/#H1.10A0UpgradeFirmwareofLA66USBLoRaWANAdapter:~~:text=20model/%23H3.2.1UpdateafirmwareviaDraginoSensorManagerUtility.exe-,1.10.2%20Update%20method%3A%C2%A0For%20LA66%20without%20bootloader,-Explanation%3A]]
69 69  
72 +**--Ensure that all devices are pre-registered on Dragino before use~/~/移至章末另起一节--**
73 +
74 +
70 70  ----
71 71  
72 72  == **2.3 Register Devices & Gateways on LNS** ==
... ... @@ -73,12 +73,12 @@
73 73  
74 74  === **2.3.1 Register Device** ===
75 75  
76 -1.Have a check of package box to get DEVEUI/ APPEUI/ APPKEY(OTTAKEY)
81 +**1.Have a check of package box to get DEVEUI/ APPEUI/ APPKEY(OTTAKEY)**
77 77  
78 78  [[image:1747970430695-168.jpg||height="510" width="852"]]
79 79  
80 80  
81 -2.Register on LNS and replace decoding
86 +**2.Register on LNS and replace decoding**
82 82  
83 83  * **Decoding for ChirpStack:**
84 84  
... ... @@ -97,7 +97,7 @@
97 97   var data = {};
98 98   if (bytes.length >= 9) {
99 99   data.flag = bytes[0];
100 -data.Node_type = "LA66";
105 +data.Node_type = "Dragino_Mapper";
101 101   data.latitude = parseFloat(((bytes[1] << 24 >>> 0 | bytes[2] << 16 | bytes[3] << 8 | bytes[4]) / 1e6).toFixed(6));
102 102   data.longitude = parseFloat(((bytes[5] << 24 >>> 0 | bytes[6] << 16 | bytes[7] << 8 | bytes[8]) / 1e6).toFixed(6));
103 103  
... ... @@ -149,7 +149,7 @@
149 149   }
150 150   else if(bytes.length==9){
151 151   data.doorflg = doorflg
152 - data.Node_type = "LA66"
157 + data.Node_type = "Dragino_Mapper"
153 153   data.latitude=parseFloat(((bytes[1]<<24|bytes[2]<<16|bytes[3]<<8|bytes[4])/1000000).toFixed(6));
154 154   data.longitude=parseFloat(((bytes[5]<<24|bytes[6]<<16|bytes[7]<<8|bytes[8])/1000000).toFixed(6));
155 155   return data;
... ... @@ -157,60 +157,88 @@
157 157  }
158 158  {{/code}}
159 159  
160 -* If you using other LNS, you can code yourself(The first nine bits of the uploaded data are the flag bit + position, and the rest are the title) or  send mail to [[support@dragino.cc>>mailto:support@dragino.cc]]
165 +* If you using other LNS, you can code yourself(The first nine bits of the uploaded data are the flag bit + position, and the rest are the title) or  send mail to [[support@dragino.cc>>mailto:support@dragino.cc]])
161 161  
167 +=== --**2.2.2 Register Gateway(If you use Dragino's gateway)~/~/删除网关配置介绍**-- ===
168 +
169 +
170 +
162 162  ----
163 163  
173 +== **2.4  LNS Connection Method~/~/已更新标题** ==
164 164  
165 -=== **2.2.2 Register Gateway(If you use Dragino's gateway)** ===
175 +**Choose LNS: **After log in Dragino platform, click the button "Import-Dragino-map"and choose the LNS you using.
166 166  
167 -When you receive the gateway, you need to register the gateway to the server for it to work properly, here are the instructions for registering the gateway to the server:[[How to register gateway to server - ThingsEye Wiki>>url:https://wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20register%20gateway%20to%20server/]]
177 +[[image:1747971716633-666.png||height="487" width="654"]]
168 168  
169 169  
170 170  ----
171 171  
172 -== **2.4 Import device to Dragino map** ==
182 +(((
183 +**Example of TTN**~/~/已增添详细文字说明
173 173  
174 -1. After log in Dragino platform, click the button "Import-Dragino-map"an choose the LNS you using.[[image:1747971716633-666.png]]
175 -1. (((
176 -Example of TTN: Imput your TTN account and password (It's will be hashed and we cannot see it.)[[image:1747984882996-168.png]]
185 +[[image:1748250400868-786.png]]
186 +
187 +**Account & Passwork:** Imput your TTN account and password to use API port.
188 +
189 +**MQTT Address: **Imput public address** (Don't imput Port)**
190 +
191 +
177 177  )))
178 -1. Example of ChirpStack[[image:1747972538335-599.png]]
179 179  
180 180  ----
181 181  
196 +**Example of ChirpStack**~/~/已增添详细文字说明
182 182  
183 -= **3. How To Use?** =
198 +[[image:1749375906728-208.png]]
184 184  
185 -== **3.1 Outdoor_signal dashboard** ==
200 +**MQTT Address: **Your MQTT server address or the cloud server address you use
186 186  
187 -Outdoors_signal supports viewing both the signal coverage of a single gateway and the combined coverage of all gateways.
202 +**Subscribe Topic: **The default for Topic is:  application/**chirpstack application id**/device/+/event/up(Replace"**chirpstack application id**" with the one which is actually used)
188 188  
204 +**SSL Certificates: ** Copy the contents of the certificates and paste them into the linked file below, a total of three certificates are required(Integrated Certificate File demo Download: [[Demo.pem>>attach:demo.pem]])
189 189  
190 -=== **3.1.1 Create the gateway layer.** ===
191 191  
192 -(% class="wikigeneratedid" id="HClickthecenterbuttonontherighttoaddagatewaylayer.28PleasecreatealldevicesthatcanacceptthecurrentLA66frequencyband3Botherwise2Cthereceiveddatawillnotbedisplayed.29" %)
193 -Click the center button on the right to add a gateway layer. (Please create all devices that can accept the current LA66 frequency band; otherwise, the received data will not be displayed.)
207 +----
194 194  
195 -For example, here we created a gateway with the ID a84041fdfe27e8fa
209 +**Check:**Whether the device is connected to the platform through LNS~/~/新增自检教学，避免后续额外工作量
196 196  
197 -You can click here to modify the gateway layer ID (it must correspond one-to-one with the gateway ID that will receive the data).
211 +[[image:1748602571865-850.png]]
198 198  
199 -[[image:1748226933887-176.png||height="291" width="242"]]👉[[image:1748226941899-789.png||height="308" width="896"]]
200 200  
214 + Whether the device profile is Calculate AVG? Change it if it not.
215 +
216 +[[image:1748416951693-709.png]]
217 +
218 +👇
219 +
220 +[[image:1749376046690-863.png]]
221 +
201 201  ----
202 202  
203 -Click here to delete the gateway layer.
204 204  
205 -[[image:1748226990199-388.png]]
225 += **3. How To Use?~/~/图片显示问题已修复，硬件使用方法已放到小节头(即插即用，自动判断室内外)** =
206 206  
227 +== **3.1 Outdoor_signal dashboard** ==
207 207  
229 +Outdoors_signal supports viewing both the signal coverage of a single gateway and the combined coverage of all gateways.
230 +
231 +
232 +=== **3.1.1 Create the gateway layer.** ===
233 +
234 +(% class="wikigeneratedid" %)
235 +**This solution is pre-configured. Under normal circumstances, when the device successfully uploads information through gateways, it will automatically generate the corresponding assets and put them in the Layer.**
236 +
237 +(% class="wikigeneratedid" %)
238 +The layer will be named after the gateway's IMEI, and you can set a label. At the same time, there will be a dashboard that collects all gateway signals and displays them in an overlay named after the user's registered email address.(Such like :All_signal:$[customer_email])
239 +
208 208  ----
209 209  
210 -Click row of gateway layer will turn to the detail page, this page will be blank before gateway upload data.
242 +Click row of gateway layer will turn to the detail page.
211 211  
212 -[[image:1748227035403-882.png||height="487" width="196"]]👉 [[image:1748227056061-411.png||height="655" width="891"]]
244 +[[image:1749376107488-669.png]]👉 [[image:1748603053572-488.png||height="644" width="672"]]
213 213  
246 +
214 214  ----
215 215  
216 216  Click the top-left corner to return.
... ... @@ -217,18 +217,16 @@
217 217  
218 218  [[image:1748227163443-264.png]]
219 219  
253 +
220 220  ----
221 221  
222 222  === **3.1.2 Measuring** ===
223 223  
224 -Insert the LA66 into phone or tablet, press the button to switch to ON and start detection. Click the button in the top-right corner of the main page to start receiving data. Data will be uploaded every 6 seconds based on the tablet's location. Simply move the tablet to measure signal strength from different places.
258 +Insert the LA66 USB LoRaWAN Adapter into phone or tablet. Data will be uploaded every 7 seconds based on the tablet's location. Simply move the tablet to measure signal strength from different places.
225 225  
226 -[[image:1748227286978-688.png||height="149" width="660"]]
260 +[[image:1748243979452-223.jpg||height="495" width="661"]]
227 227  
228 - 👇
229 229  
230 -[[image:1748227303533-598.png||height="151" width="661"]]
231 -
232 232  ----
233 233  
234 234  When the gateway received the first set of data, the current gateway will appear in the left-side list of the gateway interface. When received the second set of data, the current signal strength will be displayed on the right-side map.
... ... @@ -235,8 +235,9 @@
235 235  
236 236  The measured data will be displayed in translucent dots of different colors, green represents a good signal, and red represents a poor signal.
237 237  
238 -[[image:1748227348704-578.png||height="360" width="663"]]
269 +[[image:1748601795657-856.png||height="632" width="663"]]
239 239  
271 +
240 240  ----
241 241  
242 242  You can click here to edit the device remarks.
... ... @@ -243,33 +243,16 @@
243 243  
244 244  [[image:1748227380372-654.png||height="509" width="659"]]
245 245  
246 -----
247 247  
248 -You can click here to delete the device (deletion is irreversible, please proceed with caution).
249 -
250 -[[image:1748227409566-450.png||height="443" width="659"]]
251 -
252 252  ----
253 253  
254 -All data collected by the gateways will also be displayed in All_signal simultaneously.
281 +All data collected by the gateways will also be displayed in the layer which named customer's E-mail simultaneously.
255 255  
256 -[[image:1748227432762-994.png||height="478" width="660"]]
283 +[[image:1749376404143-588.png]]
257 257  
258 258  ----
259 259  
260 -=== **3.1.3 Turn OFF to stop measuring** ===
261 261  
262 -Once the current location's detection is complete, press the button again to switch to OFF and pause detection.
263 -
264 -[[image:1748227523105-709.png||height="150" width="649"]]
265 -
266 - 👇
267 -
268 -[[image:1748227534764-184.png||height="147" width="649"]]
269 -
270 -----
271 -
272 -
273 273  == **3.2 Indoors_signal dashboard** ==
274 274  
275 275  Indoors_signal supports measuring and marking the signal strength of all locations on the indoor floor plan.
... ... @@ -277,36 +277,35 @@
277 277  
278 278  === **3.2.1 Import the map** ===
279 279  
280 -Drag the map image here and click √ to import.
295 +Drag the map image here and click √ to import.**(Only supports SVG format)**
281 281  
282 -[[image:1748228668245-725.png||height="202" width="651"]]
297 +[[image:1749376507835-691.png]]
283 283  
299 +
284 284  ----
285 285  
286 286  === **3.2.2 Measuring** ===
287 287  
288 -1.Mark on map where you want to measuring.
304 +1.Mark on map where you want to measuring than click Yes.
289 289  
290 -[[image:1748228872833-162.png||height="477" width="732"]]
306 +[[image:1748241711617-627.png]]
291 291  
308 +
292 292  ----
293 293  
294 -2.Move to the measurement point, insert the LA66, and press the button to switch to ON, then you can see the new data renewing.
311 +2.Move to the measurement point, insert the LA66 USB LoRaWAN Adapter , then you can see the new data renewing.
295 295  
296 -[[image:1748229559964-501.png||height="401" width="733"]]
313 +
297 297  
315 +
316 +
298 298  ----
299 299  
300 -3.Mark the next place which to be measured than move to the measurement point.Repeat the above steps to measure(**Remeber: Mark point before move.**)
319 +3.Mark the next place which to be measured than move to the measurement point.Repeat the above steps to measure**(Remeber: Mark point before move.**)
301 301  
302 302  [[image:1748229639368-109.png||height="605" width="820"]]
303 303  
304 -----
305 305  
306 -4.Click button to Off to stop measuring.
307 -
308 -[[image:1748229757097-872.png||height="232" width="736"]]
309 -
310 310  ----
311 311  
312 312  === **3.2.3 Delete point** ===
... ... @@ -315,17 +315,12 @@
315 315  
316 316  [[image:1748229833594-993.png||height="320" width="735"]]
317 317  
332 +
318 318  ----
319 319  
320 320  
321 321  == **4. Use of Tablet** ==
322 322  
323 -For added convenience, you can use a tablet to access the **ThingsEye.io** platform. This allows for real-time monitoring and management of your food safety solution on the go.
338 +For added convenience, you can use a tablet to access the platform.
324 324  
325 -* **Download APP: **Scan the QR code or click the link to download the app.
326 -
327 -| |**QR code**|**Link**
328 -|**Google Play**|[[image:https://wiki.thingseye.io/xwiki/bin/download/Main/%E2%80%8B%E2%80%8B%E2%80%8B%E2%80%8B%E2%80%8B%E2%80%8B%E2%80%8BThingsEye%20Food%20Safety%20Solution%20End%20User%20Guide/WebHome/1739501688627-693.png?rev=1.1||alt="1739501688627-693.png"]]|[[https:~~/~~/play.google.com/store/apps/details?id=com.teyiwulian.thingseye.app>>url:https://play.google.com/store/apps/details?id=com.teyiwulian.thingseye.app]]
329 -|**APP Store**|[[image:https://wiki.thingseye.io/xwiki/bin/download/Main/%E2%80%8B%E2%80%8B%E2%80%8B%E2%80%8B%E2%80%8B%E2%80%8B%E2%80%8BThingsEye%20Food%20Safety%20Solution%20End%20User%20Guide/WebHome/1739501688627-907.png?rev=1.1||alt="1739501688627-907.png"]]|[[https:~~/~~/apps.apple.com/us/app/thingseye-io/id6739418014>>url:https://apps.apple.com/us/app/thingseye-io/id6739418014]]
330 -
331 -After that you can use your dashboard as normal.The display is as follows:
340 +* **Download APP: **[[https:~~/~~/www.dropbox.com/scl/fo/qdiwkpcxc03qu2r2w0g46/AKqR2FByUdkoWZPZh-diYfQ?rlkey=t1a1kwlvr93c1459mz9jifers&st=kji4rdg0&dl=0>>https://www.dropbox.com/scl/fo/qdiwkpcxc03qu2r2w0g46/AKqR2FByUdkoWZPZh-diYfQ?rlkey=t1a1kwlvr93c1459mz9jifers&st=kji4rdg0&dl=0]]
1748231443123-856.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +99.0 KB
Content
1748237918280-338.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +154.8 KB
Content
1748239366095-176.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +60.8 KB
Content
1748241600796-653.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +63.9 KB
Content
1748241711617-627.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +48.7 KB
Content
1748243979452-223.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +148.3 KB
Content
1748250400868-786.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +62.5 KB
Content
1748416824921-381.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +55.9 KB
Content
1748416951693-709.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +96.0 KB
Content
1748416993868-454.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +98.6 KB
Content
1748417025235-726.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +87.4 KB
Content
1748417055367-336.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +76.2 KB
Content
1748418008638-728.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +81.6 KB
Content
1748418120064-329.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +105.5 KB
Content
1748418142794-272.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +101.4 KB
Content
1748482052834-585.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +197.4 KB
Content
1748482145587-587.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +344.5 KB
Content
1748601432759-282.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +32.9 KB
Content
1748601500104-639.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +761.0 KB
Content
1748601609894-341.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +139.2 KB
Content
1748601692184-985.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +141.9 KB
Content
1748601714123-652.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +144.4 KB
Content
1748601795657-856.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +685.2 KB
Content
1748602283686-496.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +232.9 KB
Content
1748602304586-198.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +218.9 KB
Content
1748602461523-537.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +51.2 KB
Content
1748602571865-850.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +50.8 KB
Content
1748602603331-559.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +48.6 KB
Content
1748602881431-230.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +30.8 KB
Content
1748603053572-488.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +685.3 KB
Content
1748603159913-908.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +613.1 KB
Content
1749375906728-208.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +217.3 KB
Content
1749376046690-863.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
1749376107488-669.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +14.0 KB
Content
1749376404143-588.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +723.5 KB
Content
1749376507835-691.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +129.3 KB
Content
demo.pem
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +0 bytes
Content
图片5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.hera
Size
... ... @@ -1,0 +1,1 @@
1 +99.0 KB
Content