Last modified by Alec Chen on 2026/01/20 15:25
From version 10.1
edited by Alec Chen
on 2026/01/06 11:20
Change comment: There is no comment for this version
To version 17.1
edited by Alec Chen
on 2026/01/08 14:03
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,39 +1,48 @@
1 1  {{toc/}}
2 2  
3 -= 1. General NB device configure to attach network (skip this step for 1TB devices) =
3 += **1. General NB device configure to attach network (skip this step for 1TB devices)** =
4 4  
5 +(% class="wikigeneratedid" id="HToattacheNB-IoTsensorstoNB-IoTNetwork2CYouneedto:" %)
5 5  To attache NB-IoT sensors to NB-IoT Network, You need to:
6 6  
8 +(((
7 7  1. Get a NB-IoT SIM card from Service Provider. (Not the same as the SIM card we use in mobile phone)
8 -1. Power Off End Node ( See below for the power off/on position)
10 +1. Open the cover and power off End Node ( Take out the Jumper)
11 +1. UnsCrew and remove the module
12 +)))
13 +
14 +(((
15 +[[image:1767669624752-329.png||height="287" width="706"]]
16 +)))
17 +
18 +(((
19 +(% start="4" %)
9 9  1. Insert the SIM card to Sensor. ( See below for direction)
10 -1. Power On End Node.
11 11  
12 -= =
22 +[[image:https://wiki.dragino.com/xwiki/bin/download/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/WebHome/image-20230808205045-1.png?width=438&height=293&rev=1.1||alt="image-20230808205045-1.png"]]
23 +)))
13 13  
14 -[[image:1767669624752-329.png||height="287" width="706"]]
25 +(((
26 +(% start="5" %)
27 +1. Install the module and tighten the screws, then Power On End Node.(Put the Jumper)
28 +1. Put the cover on and press and hold the push button for 5 seconds to restart the device.
15 15  
16 -= [[image:https://wiki.dragino.com/xwiki/bin/download/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/WebHome/image-20230808205045-1.png?width=438&height=293&rev=1.1||alt="image-20230808205045-1.png"]] =
30 +[[image:1767838844115-492.png]]
17 17  
32 +----
33 +
18 18  = **2. Configure via Mobile APP** =
19 19  
20 20  == **2.1 Download APP** ==
21 21  
22 22  (% class="wikigeneratedid" id="HDownloadfromGooglePlayStore" %)
23 -**Download from Google Play Store**
39 +**Download from Google Play / APP Store**
24 24  
25 -Open the Google Play Store, search for "Devices.tool", download and install.
41 +Open the Google Play Store, search for "Devices.tool", download and install.(If you can't find it, try searching for "Dragino".)
26 26  
27 27  [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230134826-1.png?width=514&height=292&rev=1.1||alt="image-20241230134826-1.png" height="292" width="514"]]
28 28  
29 -(% class="wikigeneratedid" id="HDownloadfromDropbox" %)
30 -**Download from Dropbox**
31 31  
32 -Click on the URL below to enter Dropbox to download the app:
33 -
34 -[[Download link>>url:https://www.dropbox.com/scl/fo/gyscmfn1s03oz3n8rif8w/AJW7JoMQsQ56dtlls2SNf9c?rlkey=3q2cxwriyzh26vuairx01yebc&st=be5jv92w&dl=0]]
35 -
36 -
37 37  == **2.2 How to use BLE to configure Sensors** ==
38 38  
39 39  See Video Instruction: **[[Use BLE to configure Sensors>>url:https://youtube.com/shorts/Ajq2NvUslnw?feature=share]]**
... ... @@ -40,6 +40,7 @@
40 40  
41 41  [[image:1765529492527-499.jpg||height="1084" width="504"]]
42 42  
52 +
43 43  Install in mobile and run. Press the reset button of the device to be tested, and then click **"SCAN BLUETOOTH DEVICES".** Find the correct device and connect(the correct device name should be the same as the DEV EUI of the device).
44 44  
45 45  [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230135129-4.png?width=502&height=134&rev=1.1||alt="image-20241230135129-4.png" height="134" width="502"]]
... ... @@ -51,8 +51,9 @@
51 51  
52 52  [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230151129-6.png?width=507&height=413&rev=1.1||alt="image-20241230151129-6.png" height="413" width="507"]]
53 53  
54 -Each device has unique password named **AT PIN**. Input the password and you will be able to get access to the UART of the device.
55 55  
65 +Each device has unique password named **AT PIN**.(Printed on the inside of the packaging box) Input the password and you will be able to get access to the UART of the device.
66 +
56 56  [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230152403-9.png?width=506&height=232&rev=1.1||alt="image-20241230152403-9.png" height="232" width="506"]]
57 57  
58 58  Enter AT PIN + line break in the dialog box, click **"Send"**, and return the data display **"Password Correct"** to start configuring the AT command.
... ... @@ -59,6 +59,7 @@
59 59  
60 60  [[image:1765530044476-685.png||height="1081" width="505"]]
61 61  
73 +
62 62  **Note:**
63 63  
64 64  **Devices.Tool is now compatible with sending commands without line breaks, and supports the simultaneous configuration of multiple AT commands. A record is also automatically saved after an instruction is sent, and clicking on a command in the history will display it directly in the input box.**
... ... @@ -66,20 +66,32 @@
66 66  
67 67  == **2.3 Configure server address ,data format and APN** ==
68 68  
69 -[[image:1765532738848-908.png||height="1078" width="500"]]
81 +**Please note: **the iOS version of the software does not support the quick configuration feature and requires manual entry of the full command.
70 70  
83 +[[image:1767852004106-496.png||height="1075" width="502"]]
84 +
85 +
86 +=== **1) Configure data sending format** ===
87 +
88 +=== [[image:1767840291428-395.png||height="1071" width="500"]] ===
89 +
71 71  [[image:1765532795117-746.png||height="1068" width="500"]]
72 72  
73 -[[image:1765532866980-506.png||height="1069" width="500"]]
74 74  
75 -[[image:1765532883995-630.png||height="1072" width="500"]]
93 +=== **2) Configure server address** ===
76 76  
77 -[[image:1765532923294-316.png||height="1069" width="501"]]
95 +**If you want uplink to ThingsEye, address configuration should be ~-~-- AT+SERVADDR=server1.thingseye.io,11560 **
78 78  
97 +[[image:1767840253208-908.png||height="1068" width="499"]]
79 79  
99 +[[image:1765532866980-506.png||height="1069" width="500"]]
80 80  
81 81  
102 +=== **3)Configure the SIM card server address (APN).** ===
82 82  
104 +**If you use dragino's SIM card, APN configuration should be ~-~-- AT+APN=iot.1nce.net**
83 83  
106 +[[image:1765532883995-630.png||height="1072" width="500"]]
84 84  
85 -
108 +[[image:1765532923294-316.png||height="1069" width="501"]]
109 +)))
1767838635087-525.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Alec
Size
... ... @@ -1,0 +1,1 @@
1 +66.3 KB
Content
1767838844115-492.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Alec
Size
... ... @@ -1,0 +1,1 @@
1 +63.8 KB
Content
1767840253208-908.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Alec
Size
... ... @@ -1,0 +1,1 @@
1 +523.1 KB
Content
1767840291428-395.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Alec
Size
... ... @@ -1,0 +1,1 @@
1 +523.7 KB
Content
1767852004106-496.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Alec
Size
... ... @@ -1,0 +1,1 @@
1 +523.7 KB
Content