Last modified by Alec Chen on 2026/01/20 15:25
From version 13.1
edited by Alec Chen
on 2026/01/08 10:15
Change comment: There is no comment for this version
To version 21.1
edited by Alec Chen
on 2026/01/20 15:25
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -5,28 +5,30 @@
5 5  (% class="wikigeneratedid" id="HToattacheNB-IoTsensorstoNB-IoTNetwork2CYouneedto:" %)
6 6  To attache NB-IoT sensors to NB-IoT Network, You need to:
7 7  
8 -1. (((
9 -Get a NB-IoT SIM card from Service Provider. (Not the same as the SIM card we use in mobile phone)
8 +(((
9 +1. Get a NB-IoT SIM card from Service Provider. (Not the same as the SIM card we use in mobile phone)
10 +1. Open the cover and power off End Node ( Take out the Jumper)
11 +1. UnsCrew and remove the module
10 10  )))
11 -1. (((
12 -Power Off End Node ( Take out the Jumper)
13 13  
14 +(((
14 14  [[image:1767669624752-329.png||height="287" width="706"]]
15 15  )))
16 -1. (((
17 -Insert the SIM card to Sensor. ( See below for direction)
18 18  
18 +(((
19 +(% start="4" %)
20 +1. Insert the SIM card to Sensor. ( See below for direction)
21 +
19 19  [[image:https://wiki.dragino.com/xwiki/bin/download/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/WebHome/image-20230808205045-1.png?width=438&height=293&rev=1.1||alt="image-20230808205045-1.png"]]
20 20  )))
21 -1. (((
22 -Power On End Node.(Put the Jumper)
23 23  
25 +(((
26 +(% start="5" %)
27 +1. Install the module and tighten the screws, then Power On End Node.(Put the Jumper)
28 +1. Put the cover on and press and hold the push button for 5 seconds to restart the device.
24 24  
25 -
26 -)))
30 +[[image:1767838844115-492.png]]
27 27  
28 -
29 -
30 30  ----
31 31  
32 32  = **2. Configure via Mobile APP** =
... ... @@ -34,20 +34,13 @@
34 34  == **2.1 Download APP** ==
35 35  
36 36  (% class="wikigeneratedid" id="HDownloadfromGooglePlayStore" %)
37 -**Download from Google Play Store**
39 +**Download from Google Play / APP Store**
38 38  
39 -Open the Google Play Store, search for "Devices.tool", download and install.
41 +Open the Google Play Store, search for "Devices.tool", download and install.(If you can't find it, try searching for "Dragino".)
40 40  
41 41  [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230134826-1.png?width=514&height=292&rev=1.1||alt="image-20241230134826-1.png" height="292" width="514"]]
42 42  
43 -(% class="wikigeneratedid" id="HDownloadfromDropbox" %)
44 -**Download from Dropbox**
45 45  
46 -Click on the URL below to enter Dropbox to download the app:
47 -
48 -[[Download link>>url:https://www.dropbox.com/scl/fo/gyscmfn1s03oz3n8rif8w/AJW7JoMQsQ56dtlls2SNf9c?rlkey=3q2cxwriyzh26vuairx01yebc&st=be5jv92w&dl=0]]
49 -
50 -
51 51  == **2.2 How to use BLE to configure Sensors** ==
52 52  
53 53  See Video Instruction: **[[Use BLE to configure Sensors>>url:https://youtube.com/shorts/Ajq2NvUslnw?feature=share]]**
... ... @@ -54,6 +54,7 @@
54 54  
55 55  [[image:1765529492527-499.jpg||height="1084" width="504"]]
56 56  
52 +
57 57  Install in mobile and run. Press the reset button of the device to be tested, and then click **"SCAN BLUETOOTH DEVICES".** Find the correct device and connect(the correct device name should be the same as the DEV EUI of the device).
58 58  
59 59  [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230135129-4.png?width=502&height=134&rev=1.1||alt="image-20241230135129-4.png" height="134" width="502"]]
... ... @@ -65,8 +65,9 @@
65 65  
66 66  [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230151129-6.png?width=507&height=413&rev=1.1||alt="image-20241230151129-6.png" height="413" width="507"]]
67 67  
68 -Each device has unique password named **AT PIN**. Input the password and you will be able to get access to the UART of the device.
69 69  
65 +Each device has unique password named **AT PIN**.(Printed on the inside of the packaging box) Input the password and you will be able to get access to the UART of the device.
66 +
70 70  [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230152403-9.png?width=506&height=232&rev=1.1||alt="image-20241230152403-9.png" height="232" width="506"]]
71 71  
72 72  Enter AT PIN + line break in the dialog box, click **"Send"**, and return the data display **"Password Correct"** to start configuring the AT command.
... ... @@ -73,6 +73,7 @@
73 73  
74 74  [[image:1765530044476-685.png||height="1081" width="505"]]
75 75  
73 +
76 76  **Note:**
77 77  
78 78  **Devices.Tool is now compatible with sending commands without line breaks, and supports the simultaneous configuration of multiple AT commands. A record is also automatically saved after an instruction is sent, and clicking on a command in the history will display it directly in the input box.**
... ... @@ -80,20 +80,70 @@
80 80  
81 81  == **2.3 Configure server address ,data format and APN** ==
82 82  
83 -[[image:1765532738848-908.png||height="1078" width="500"]]
81 +Please note: the iOS version of the software does not support the quick configuration feature and requires manual entry of the full command.
84 84  
83 +[[image:1767852004106-496.png||height="1075" width="502"]]
84 +
85 +
86 +=== 1) Configure data sending format ===
87 +
88 +(% class="wikigeneratedid" id="H" %)
89 +[[image:1767840291428-395.png||height="1071" width="500"]]
90 +
85 85  [[image:1765532795117-746.png||height="1068" width="500"]]
86 86  
93 +
94 +=== 2) Configure server address ===
95 +
96 +If you want uplink to ThingsEye, address configuration should be ~-~-- AT+SERVADDR=server1.thingseye.io,11560
97 +
98 +[[image:1767840253208-908.png||height="1068" width="499"]]
99 +
87 87  [[image:1765532866980-506.png||height="1069" width="500"]]
88 88  
102 +
103 +=== 3)Configure the SIM card server address (APN). ===
104 +
105 +If you use dragino's SIM card, APN configuration should be ~-~-- AT+APN=iot.1nce.net
106 +
89 89  [[image:1765532883995-630.png||height="1072" width="500"]]
90 90  
91 91  [[image:1765532923294-316.png||height="1069" width="501"]]
92 92  
93 93  
112 +=== **4) Verify device connectivity** ===
94 94  
114 +Input **AT+GETSENSORVALUE=1 **to verify device connectivity.
95 95  
116 +If it displayed "Failed", plz send email to "[[support@dragino.cc>>mailto:support@dragino.cc]]" ask for help
96 96  
118 +[[image:1767860428371-500.png||height="1111" width="499"]]
97 97  
120 +----
98 98  
99 -
122 += **3. Data visualization** =
123 +
124 +**If you don't have an ThingsEye(TE) account yet, please see this guide: **[[ThingsEye Account - ThingsEye Wiki>>url:https://wiki.thingseye.io/xwiki/bin/view/Main/Get%20ThingsEye%20Account/#]]
125 +
126 +The following assumes you have a TE account.
127 +
128 +
129 +Login TE: [[https:~~/~~/thingseye.io/>>https://thingseye.io/]]
130 +
131 +Download this dashboard: [[attach:dragino_nb_sensors_overview.json||target="_blank"]]
132 +
133 +Import the dashboard
134 +
135 +[[image:1768893451969-121.png]]
136 +
137 +
138 +[[image:1768893714325-953.png]]
139 +
140 +
141 +Open the dashboard, click device
142 +
143 +[[image:1768893898433-622.png]]
144 +
145 +
146 +[[image:1768893941290-766.png]]
147 +)))
1767838635087-525.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Alec
Size
... ... @@ -1,0 +1,1 @@
1 +66.3 KB
Content
1767838844115-492.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Alec
Size
... ... @@ -1,0 +1,1 @@
1 +63.8 KB
Content
1767840253208-908.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Alec
Size
... ... @@ -1,0 +1,1 @@
1 +523.1 KB
Content
1767840291428-395.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Alec
Size
... ... @@ -1,0 +1,1 @@
1 +523.7 KB
Content
1767852004106-496.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Alec
Size
... ... @@ -1,0 +1,1 @@
1 +523.7 KB
Content
1767860428371-500.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Alec
Size
... ... @@ -1,0 +1,1 @@
1 +449.6 KB
Content
1768893397451-657.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Alec
Size
... ... @@ -1,0 +1,1 @@
1 +85.2 KB
Content
1768893451969-121.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Alec
Size
... ... @@ -1,0 +1,1 @@
1 +117.1 KB
Content
1768893714325-953.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Alec
Size
... ... @@ -1,0 +1,1 @@
1 +152.1 KB
Content
1768893898433-622.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Alec
Size
... ... @@ -1,0 +1,1 @@
1 +118.2 KB
Content
1768893941290-766.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Alec
Size
... ... @@ -1,0 +1,1 @@
1 +167.5 KB
Content
dragino_nb_sensors_overview.json
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Alec
Size
... ... @@ -1,0 +1,1 @@
1 +4.9 MB
Content