Last modified by Alec Chen on 2026/01/20 15:25
From version 14.1
edited by Alec Chen
on 2026/01/08 10:17
Change comment: There is no comment for this version
To version 20.1
edited by Alec Chen
on 2026/01/19 11:48
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -27,8 +27,8 @@
27 27  1. Install the module and tighten the screws, then Power On End Node.(Put the Jumper)
28 28  1. Put the cover on and press and hold the push button for 5 seconds to restart the device.
29 29  
30 +[[image:1767838844115-492.png]]
30 30  
31 -
32 32  ----
33 33  
34 34  = **2. Configure via Mobile APP** =
... ... @@ -36,20 +36,13 @@
36 36  == **2.1 Download APP** ==
37 37  
38 38  (% class="wikigeneratedid" id="HDownloadfromGooglePlayStore" %)
39 -**Download from Google Play Store**
39 +**Download from Google Play / APP Store**
40 40  
41 -Open the Google Play Store, search for "Devices.tool", download and install.
41 +Open the Google Play Store, search for "Devices.tool", download and install.(If you can't find it, try searching for "Dragino".)
42 42  
43 43  [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230134826-1.png?width=514&height=292&rev=1.1||alt="image-20241230134826-1.png" height="292" width="514"]]
44 44  
45 -(% class="wikigeneratedid" id="HDownloadfromDropbox" %)
46 -**Download from Dropbox**
47 47  
48 -Click on the URL below to enter Dropbox to download the app:
49 -
50 -[[Download link>>url:https://www.dropbox.com/scl/fo/gyscmfn1s03oz3n8rif8w/AJW7JoMQsQ56dtlls2SNf9c?rlkey=3q2cxwriyzh26vuairx01yebc&st=be5jv92w&dl=0]]
51 -
52 -
53 53  == **2.2 How to use BLE to configure Sensors** ==
54 54  
55 55  See Video Instruction: **[[Use BLE to configure Sensors>>url:https://youtube.com/shorts/Ajq2NvUslnw?feature=share]]**
... ... @@ -56,6 +56,7 @@
56 56  
57 57  [[image:1765529492527-499.jpg||height="1084" width="504"]]
58 58  
52 +
59 59  Install in mobile and run. Press the reset button of the device to be tested, and then click **"SCAN BLUETOOTH DEVICES".** Find the correct device and connect(the correct device name should be the same as the DEV EUI of the device).
60 60  
61 61  [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230135129-4.png?width=502&height=134&rev=1.1||alt="image-20241230135129-4.png" height="134" width="502"]]
... ... @@ -67,8 +67,9 @@
67 67  
68 68  [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230151129-6.png?width=507&height=413&rev=1.1||alt="image-20241230151129-6.png" height="413" width="507"]]
69 69  
70 -Each device has unique password named **AT PIN**. Input the password and you will be able to get access to the UART of the device.
71 71  
65 +Each device has unique password named **AT PIN**.(Printed on the inside of the packaging box) Input the password and you will be able to get access to the UART of the device.
66 +
72 72  [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230152403-9.png?width=506&height=232&rev=1.1||alt="image-20241230152403-9.png" height="232" width="506"]]
73 73  
74 74  Enter AT PIN + line break in the dialog box, click **"Send"**, and return the data display **"Password Correct"** to start configuring the AT command.
... ... @@ -75,6 +75,7 @@
75 75  
76 76  [[image:1765530044476-685.png||height="1081" width="505"]]
77 77  
73 +
78 78  **Note:**
79 79  
80 80  **Devices.Tool is now compatible with sending commands without line breaks, and supports the simultaneous configuration of multiple AT commands. A record is also automatically saved after an instruction is sent, and clicking on a command in the history will display it directly in the input box.**
... ... @@ -82,19 +82,45 @@
82 82  
83 83  == **2.3 Configure server address ,data format and APN** ==
84 84  
85 -[[image:1765532738848-908.png||height="1078" width="500"]]
81 +Please note: the iOS version of the software does not support the quick configuration feature and requires manual entry of the full command.
86 86  
83 +[[image:1767852004106-496.png||height="1075" width="502"]]
84 +
85 +
86 +=== 1) Configure data sending format ===
87 +
88 +(% class="wikigeneratedid" id="H" %)
89 +[[image:1767840291428-395.png||height="1071" width="500"]]
90 +
87 87  [[image:1765532795117-746.png||height="1068" width="500"]]
88 88  
93 +
94 +=== 2) Configure server address ===
95 +
96 +If you want uplink to ThingsEye, address configuration should be ~-~-- AT+SERVADDR=server1.thingseye.io,11560
97 +
98 +[[image:1767840253208-908.png||height="1068" width="499"]]
99 +
89 89  [[image:1765532866980-506.png||height="1069" width="500"]]
90 90  
102 +
103 +=== 3)Configure the SIM card server address (APN). ===
104 +
105 +If you use dragino's SIM card, APN configuration should be ~-~-- AT+APN=iot.1nce.net
106 +
91 91  [[image:1765532883995-630.png||height="1072" width="500"]]
92 92  
93 93  [[image:1765532923294-316.png||height="1069" width="501"]]
94 94  
95 95  
112 +=== **4) Verify device connectivity** ===
96 96  
114 +Input **AT+GETSENSORVALUE=1 **to verify device connectivity.
97 97  
116 +If it displayed "Failed", plz send email to "[[support@dragino.cc>>mailto:support@dragino.cc]]" ask for help
98 98  
118 +[[image:1767860428371-500.png||height="1111" width="499"]]
99 99  
100 100  
121 +
122 +)))
1767838844115-492.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Alec
Size
... ... @@ -1,0 +1,1 @@
1 +63.8 KB
Content
1767840253208-908.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Alec
Size
... ... @@ -1,0 +1,1 @@
1 +523.1 KB
Content
1767840291428-395.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Alec
Size
... ... @@ -1,0 +1,1 @@
1 +523.7 KB
Content
1767852004106-496.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Alec
Size
... ... @@ -1,0 +1,1 @@
1 +523.7 KB
Content
1767860428371-500.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Alec
Size
... ... @@ -1,0 +1,1 @@
1 +449.6 KB
Content