Last modified by Alec Chen on 2026/01/20 15:25
From version 21.1
edited by Alec Chen
on 2026/01/20 15:25
Change comment: There is no comment for this version
To version 11.1
edited by Alec Chen
on 2026/01/06 11:23
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,34 +1,21 @@
1 1  {{toc/}}
2 2  
3 -= **1. General NB device configure to attach network (skip this step for 1TB devices)** =
3 += 1. General NB device configure to attach network (skip this step for 1TB devices) =
4 4  
5 -(% class="wikigeneratedid" id="HToattacheNB-IoTsensorstoNB-IoTNetwork2CYouneedto:" %)
6 6  To attache NB-IoT sensors to NB-IoT Network, You need to:
7 7  
8 -(((
9 9  1. Get a NB-IoT SIM card from Service Provider. (Not the same as the SIM card we use in mobile phone)
10 -1. Open the cover and power off End Node ( Take out the Jumper)
11 -1. UnsCrew and remove the module
12 -)))
13 -
14 -(((
15 -[[image:1767669624752-329.png||height="287" width="706"]]
16 -)))
17 -
18 -(((
19 -(% start="4" %)
8 +1. Power Off End Node ( See below for the power off/on position)
20 20  1. Insert the SIM card to Sensor. ( See below for direction)
10 +1. Power On End Node.
21 21  
22 -[[image:https://wiki.dragino.com/xwiki/bin/download/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/WebHome/image-20230808205045-1.png?width=438&height=293&rev=1.1||alt="image-20230808205045-1.png"]]
23 -)))
12 += =
24 24  
25 -(((
26 -(% start="5" %)
27 -1. Install the module and tighten the screws, then Power On End Node.(Put the Jumper)
28 -1. Put the cover on and press and hold the push button for 5 seconds to restart the device.
14 +[[image:1767669624752-329.png||height="287" width="706"]]
29 29  
30 -[[image:1767838844115-492.png]]
16 += [[image:https://wiki.dragino.com/xwiki/bin/download/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/WebHome/image-20230808205045-1.png?width=438&height=293&rev=1.1||alt="image-20230808205045-1.png"]] =
31 31  
18 +
32 32  ----
33 33  
34 34  = **2. Configure via Mobile APP** =
... ... @@ -36,13 +36,20 @@
36 36  == **2.1 Download APP** ==
37 37  
38 38  (% class="wikigeneratedid" id="HDownloadfromGooglePlayStore" %)
39 -**Download from Google Play / APP Store**
26 +**Download from Google Play Store**
40 40  
41 -Open the Google Play Store, search for "Devices.tool", download and install.(If you can't find it, try searching for "Dragino".)
28 +Open the Google Play Store, search for "Devices.tool", download and install.
42 42  
43 43  [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230134826-1.png?width=514&height=292&rev=1.1||alt="image-20241230134826-1.png" height="292" width="514"]]
44 44  
32 +(% class="wikigeneratedid" id="HDownloadfromDropbox" %)
33 +**Download from Dropbox**
45 45  
35 +Click on the URL below to enter Dropbox to download the app:
36 +
37 +[[Download link>>url:https://www.dropbox.com/scl/fo/gyscmfn1s03oz3n8rif8w/AJW7JoMQsQ56dtlls2SNf9c?rlkey=3q2cxwriyzh26vuairx01yebc&st=be5jv92w&dl=0]]
38 +
39 +
46 46  == **2.2 How to use BLE to configure Sensors** ==
47 47  
48 48  See Video Instruction: **[[Use BLE to configure Sensors>>url:https://youtube.com/shorts/Ajq2NvUslnw?feature=share]]**
... ... @@ -49,7 +49,6 @@
49 49  
50 50  [[image:1765529492527-499.jpg||height="1084" width="504"]]
51 51  
52 -
53 53  Install in mobile and run. Press the reset button of the device to be tested, and then click **"SCAN BLUETOOTH DEVICES".** Find the correct device and connect(the correct device name should be the same as the DEV EUI of the device).
54 54  
55 55  [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230135129-4.png?width=502&height=134&rev=1.1||alt="image-20241230135129-4.png" height="134" width="502"]]
... ... @@ -61,9 +61,8 @@
61 61  
62 62  [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230151129-6.png?width=507&height=413&rev=1.1||alt="image-20241230151129-6.png" height="413" width="507"]]
63 63  
57 +Each device has unique password named **AT PIN**. Input the password and you will be able to get access to the UART of the device.
64 64  
65 -Each device has unique password named **AT PIN**.(Printed on the inside of the packaging box) Input the password and you will be able to get access to the UART of the device.
66 -
67 67  [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230152403-9.png?width=506&height=232&rev=1.1||alt="image-20241230152403-9.png" height="232" width="506"]]
68 68  
69 69  Enter AT PIN + line break in the dialog box, click **"Send"**, and return the data display **"Password Correct"** to start configuring the AT command.
... ... @@ -70,7 +70,6 @@
70 70  
71 71  [[image:1765530044476-685.png||height="1081" width="505"]]
72 72  
73 -
74 74  **Note:**
75 75  
76 76  **Devices.Tool is now compatible with sending commands without line breaks, and supports the simultaneous configuration of multiple AT commands. A record is also automatically saved after an instruction is sent, and clicking on a command in the history will display it directly in the input box.**
... ... @@ -78,70 +78,20 @@
78 78  
79 79  == **2.3 Configure server address ,data format and APN** ==
80 80  
81 -Please note: the iOS version of the software does not support the quick configuration feature and requires manual entry of the full command.
72 +[[image:1765532738848-908.png||height="1078" width="500"]]
82 82  
83 -[[image:1767852004106-496.png||height="1075" width="502"]]
84 -
85 -
86 -=== 1) Configure data sending format ===
87 -
88 -(% class="wikigeneratedid" id="H" %)
89 -[[image:1767840291428-395.png||height="1071" width="500"]]
90 -
91 91  [[image:1765532795117-746.png||height="1068" width="500"]]
92 92  
93 -
94 -=== 2) Configure server address ===
95 -
96 -If you want uplink to ThingsEye, address configuration should be ~-~-- AT+SERVADDR=server1.thingseye.io,11560
97 -
98 -[[image:1767840253208-908.png||height="1068" width="499"]]
99 -
100 100  [[image:1765532866980-506.png||height="1069" width="500"]]
101 101  
102 -
103 -=== 3)Configure the SIM card server address (APN). ===
104 -
105 -If you use dragino's SIM card, APN configuration should be ~-~-- AT+APN=iot.1nce.net
106 -
107 107  [[image:1765532883995-630.png||height="1072" width="500"]]
108 108  
109 109  [[image:1765532923294-316.png||height="1069" width="501"]]
110 110  
111 111  
112 -=== **4) Verify device connectivity** ===
113 113  
114 -Input **AT+GETSENSORVALUE=1 **to verify device connectivity.
115 115  
116 -If it displayed "Failed", plz send email to "[[support@dragino.cc>>mailto:support@dragino.cc]]" ask for help
117 117  
118 -[[image:1767860428371-500.png||height="1111" width="499"]]
119 119  
120 -----
121 121  
122 -= **3. Data visualization** =
123 -
124 -**If you don't have an ThingsEye(TE) account yet, please see this guide: **[[ThingsEye Account - ThingsEye Wiki>>url:https://wiki.thingseye.io/xwiki/bin/view/Main/Get%20ThingsEye%20Account/#]]
125 -
126 -The following assumes you have a TE account.
127 -
128 -
129 -Login TE: [[https:~~/~~/thingseye.io/>>https://thingseye.io/]]
130 -
131 -Download this dashboard: [[attach:dragino_nb_sensors_overview.json||target="_blank"]]
132 -
133 -Import the dashboard
134 -
135 -[[image:1768893451969-121.png]]
136 -
137 -
138 -[[image:1768893714325-953.png]]
139 -
140 -
141 -Open the dashboard, click device
142 -
143 -[[image:1768893898433-622.png]]
144 -
145 -
146 -[[image:1768893941290-766.png]]
147 -)))
88 +
1767838635087-525.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Alec
Size
... ... @@ -1,1 +1,0 @@
1 -66.3 KB
Content
1767838844115-492.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Alec
Size
... ... @@ -1,1 +1,0 @@
1 -63.8 KB
Content
1767840253208-908.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Alec
Size
... ... @@ -1,1 +1,0 @@
1 -523.1 KB
Content
1767840291428-395.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Alec
Size
... ... @@ -1,1 +1,0 @@
1 -523.7 KB
Content
1767852004106-496.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Alec
Size
... ... @@ -1,1 +1,0 @@
1 -523.7 KB
Content
1767860428371-500.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Alec
Size
... ... @@ -1,1 +1,0 @@
1 -449.6 KB
Content
1768893397451-657.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Alec
Size
... ... @@ -1,1 +1,0 @@
1 -85.2 KB
Content
1768893451969-121.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Alec
Size
... ... @@ -1,1 +1,0 @@
1 -117.1 KB
Content
1768893714325-953.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Alec
Size
... ... @@ -1,1 +1,0 @@
1 -152.1 KB
Content
1768893898433-622.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Alec
Size
... ... @@ -1,1 +1,0 @@
1 -118.2 KB
Content
1768893941290-766.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Alec
Size
... ... @@ -1,1 +1,0 @@
1 -167.5 KB
Content
dragino_nb_sensors_overview.json
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Alec
Size
... ... @@ -1,1 +1,0 @@
1 -4.9 MB
Content