Last modified by Alec Chen on 2026/01/20 15:25
From version 6.1
edited by Alec Chen
on 2025/12/12 17:53
Change comment: There is no comment for this version
To version 18.2
edited by Alec Chen
on 2026/01/19 11:47
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,31 +1,55 @@
1 -
1 +{{toc/}}
2 2  
3 += **1. General NB device configure to attach network (skip this step for 1TB devices)** =
3 3  
5 +(% class="wikigeneratedid" id="HToattacheNB-IoTsensorstoNB-IoTNetwork2CYouneedto:" %)
6 +To attache NB-IoT sensors to NB-IoT Network, You need to:
4 4  
5 -= **Configure via Mobile APP** =
8 +(((
9 +1. Get a NB-IoT SIM card from Service Provider. (Not the same as the SIM card we use in mobile phone)
10 +1. Open the cover and power off End Node ( Take out the Jumper)
11 +1. UnsCrew and remove the module
12 +)))
6 6  
7 -== **1. Download APP** ==
14 +(((
15 +[[image:1767669624752-329.png||height="287" width="706"]]
16 +)))
8 8  
9 -(% class="wikigeneratedid" id="HDownloadfromGooglePlayStore" %)
10 -**Download from Google Play Store**
18 +(((
19 +(% start="4" %)
20 +1. Insert the SIM card to Sensor. ( See below for direction)
11 11  
12 -Open the Google Play Store, search for "Devices.tool", download and install.
22 +[[image:https://wiki.dragino.com/xwiki/bin/download/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/WebHome/image-20230808205045-1.png?width=438&height=293&rev=1.1||alt="image-20230808205045-1.png"]]
23 +)))
13 13  
14 -[[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230134826-1.png?width=514&height=292&rev=1.1||alt="image-20241230134826-1.png" height="292" width="514"]]
25 +(((
26 +(% start="5" %)
27 +1. Install the module and tighten the screws, then Power On End Node.(Put the Jumper)
28 +1. Put the cover on and press and hold the push button for 5 seconds to restart the device.
15 15  
16 -==== **Download from Dropbox** ====
30 +[[image:1767838844115-492.png]]
17 17  
18 -Click on the URL below to enter Dropbox to download the app:
32 +----
19 19  
20 -[[Download link>>url:https://www.dropbox.com/scl/fo/gyscmfn1s03oz3n8rif8w/AJW7JoMQsQ56dtlls2SNf9c?rlkey=3q2cxwriyzh26vuairx01yebc&st=be5jv92w&dl=0]]
34 += **2. Configure via Mobile APP** =
21 21  
36 +== **2.1 Download APP** ==
22 22  
23 -== **2. How to use BLE to configure Sensors** ==
38 +(% class="wikigeneratedid" id="HDownloadfromGooglePlayStore" %)
39 +**Download from Google Play / APP Store**
24 24  
41 +Open the Google Play Store, search for "Devices.tool", download and install.(If you can't find it, try searching for "Dragino".)
42 +
43 +[[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230134826-1.png?width=514&height=292&rev=1.1||alt="image-20241230134826-1.png" height="292" width="514"]]
44 +
45 +
46 +== **2.2 How to use BLE to configure Sensors** ==
47 +
25 25  See Video Instruction: **[[Use BLE to configure Sensors>>url:https://youtube.com/shorts/Ajq2NvUslnw?feature=share]]**
26 26  
27 27  [[image:1765529492527-499.jpg||height="1084" width="504"]]
28 28  
52 +
29 29  Install in mobile and run. Press the reset button of the device to be tested, and then click **"SCAN BLUETOOTH DEVICES".** Find the correct device and connect(the correct device name should be the same as the DEV EUI of the device).
30 30  
31 31  [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230135129-4.png?width=502&height=134&rev=1.1||alt="image-20241230135129-4.png" height="134" width="502"]]
... ... @@ -37,8 +37,9 @@
37 37  
38 38  [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230151129-6.png?width=507&height=413&rev=1.1||alt="image-20241230151129-6.png" height="413" width="507"]]
39 39  
40 -Each device has unique password named **AT PIN**. Input the password and you will be able to get access to the UART of the device.
41 41  
65 +Each device has unique password named **AT PIN**.(Printed on the inside of the packaging box) Input the password and you will be able to get access to the UART of the device.
66 +
42 42  [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230152403-9.png?width=506&height=232&rev=1.1||alt="image-20241230152403-9.png" height="232" width="506"]]
43 43  
44 44  Enter AT PIN + line break in the dialog box, click **"Send"**, and return the data display **"Password Correct"** to start configuring the AT command.
... ... @@ -45,28 +45,52 @@
45 45  
46 46  [[image:1765530044476-685.png||height="1081" width="505"]]
47 47  
73 +
48 48  **Note:**
49 49  
50 50  **Devices.Tool is now compatible with sending commands without line breaks, and supports the simultaneous configuration of multiple AT commands. A record is also automatically saved after an instruction is sent, and clicking on a command in the history will display it directly in the input box.**
51 51  
52 52  
53 -== **3. Configure server address ,data format and APN** ==
79 +== **2.3 Configure server address ,data format and APN** ==
54 54  
55 -[[image:1765532738848-908.png||height="1078" width="500"]]
81 +Please note: the iOS version of the software does not support the quick configuration feature and requires manual entry of the full command.
56 56  
83 +[[image:1767852004106-496.png||height="1075" width="502"]]
84 +
85 +
86 +=== 1) Configure data sending format ===
87 +
88 +=== [[image:1767840291428-395.png||height="1071" width="500"]] ===
89 +
57 57  [[image:1765532795117-746.png||height="1068" width="500"]]
58 58  
92 +
93 +=== 2) Configure server address ===
94 +
95 +If you want uplink to ThingsEye, address configuration should be ~-~-- AT+SERVADDR=server1.thingseye.io,11560
96 +
97 +[[image:1767840253208-908.png||height="1068" width="499"]]
98 +
59 59  [[image:1765532866980-506.png||height="1069" width="500"]]
60 60  
101 +
102 +=== 3)Configure the SIM card server address (APN). ===
103 +
104 +If you use dragino's SIM card, APN configuration should be ~-~-- AT+APN=iot.1nce.net
105 +
61 61  [[image:1765532883995-630.png||height="1072" width="500"]]
62 62  
63 63  [[image:1765532923294-316.png||height="1069" width="501"]]
64 64  
65 65  
111 +=== **3) Verify device connectivity** ===
66 66  
113 +Input **AT+GETSENSORVALUE=1 **to verify device connectivity.
67 67  
115 +If it displayed "Failed", plz send email to "[[support@dragino.cc>>mailto:support@dragino.cc]]" ask for help
68 68  
117 +[[image:1767860428371-500.png||height="1111" width="499"]]
69 69  
70 70  
71 -
72 72  
121 +)))
1767669624752-329.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Alec
Size
... ... @@ -1,0 +1,1 @@
1 +647.7 KB
Content
1767838635087-525.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Alec
Size
... ... @@ -1,0 +1,1 @@
1 +66.3 KB
Content
1767838844115-492.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Alec
Size
... ... @@ -1,0 +1,1 @@
1 +63.8 KB
Content
1767840253208-908.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Alec
Size
... ... @@ -1,0 +1,1 @@
1 +523.1 KB
Content
1767840291428-395.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Alec
Size
... ... @@ -1,0 +1,1 @@
1 +523.7 KB
Content
1767852004106-496.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Alec
Size
... ... @@ -1,0 +1,1 @@
1 +523.7 KB
Content
1767860428371-500.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Alec
Size
... ... @@ -1,0 +1,1 @@
1 +449.6 KB
Content