Version 14.4 by Alec Chen on 2026/01/08 10:24
Show last authors
1 {{toc/}}
2
3 = **1. General NB device configure to attach network (skip this step for 1TB devices)** =
4
5 (% class="wikigeneratedid" id="HToattacheNB-IoTsensorstoNB-IoTNetwork2CYouneedto:" %)
6 To attache NB-IoT sensors to NB-IoT Network, You need to:
7
8 (((
9 1. Get a NB-IoT SIM card from Service Provider. (Not the same as the SIM card we use in mobile phone)
10 1. Open the cover and power off End Node ( Take out the Jumper)
11 1. UnsCrew and remove the module
12 )))
13
14 (((
15 [[image:1767669624752-329.png||height="287" width="706"]]
16 )))
17
18 (((
19 (% start="4" %)
20 1. Insert the SIM card to Sensor. ( See below for direction)
21
22 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/WebHome/image-20230808205045-1.png?width=438&height=293&rev=1.1||alt="image-20230808205045-1.png"]]
23 )))
24
25 (((
26 (% start="5" %)
27 1. Install the module and tighten the screws, then Power On End Node.(Put the Jumper)
28 1. Put the cover on and press and hold the push button for 5 seconds to restart the device.
29
30 [[image:1767838844115-492.png]]
31
32 ----
33
34 = **2. Configure via Mobile APP** =
35
36 == **2.1 Download APP** ==
37
38 (% class="wikigeneratedid" id="HDownloadfromGooglePlayStore" %)
39 **Download from Google Play / APP Store**
40
41 Open the Google Play Store, search for "Devices.tool", download and install.(If you can't find it, try searching for "Dragino".)
42
43 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230134826-1.png?width=514&height=292&rev=1.1||alt="image-20241230134826-1.png" height="292" width="514"]]
44
45
46 == **2.2 How to use BLE to configure Sensors** ==
47
48 See Video Instruction: **[[Use BLE to configure Sensors>>url:https://youtube.com/shorts/Ajq2NvUslnw?feature=share]]**
49
50 [[image:1765529492527-499.jpg||height="1084" width="504"]]
51
52 Install in mobile and run. Press the reset button of the device to be tested, and then click **"SCAN BLUETOOTH DEVICES".** Find the correct device and connect(the correct device name should be the same as the DEV EUI of the device).
53
54 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230135129-4.png?width=502&height=134&rev=1.1||alt="image-20241230135129-4.png" height="134" width="502"]]
55
56
57 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230152054-8.png?width=504&height=241&rev=1.1||alt="image-20241230152054-8.png" height="241" width="504"]]
58
59 After the connection is successful, enter the interface and click **"DIALOGBOX".**
60
61 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230151129-6.png?width=507&height=413&rev=1.1||alt="image-20241230151129-6.png" height="413" width="507"]]
62
63 Each device has unique password named **AT PIN**. Input the password and you will be able to get access to the UART of the device.
64
65 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230152403-9.png?width=506&height=232&rev=1.1||alt="image-20241230152403-9.png" height="232" width="506"]]
66
67 Enter AT PIN + line break in the dialog box, click **"Send"**, and return the data display **"Password Correct"** to start configuring the AT command.
68
69 [[image:1765530044476-685.png||height="1081" width="505"]]
70
71 **Note:**
72
73 **Devices.Tool is now compatible with sending commands without line breaks, and supports the simultaneous configuration of multiple AT commands. A record is also automatically saved after an instruction is sent, and clicking on a command in the history will display it directly in the input box.**
74
75
76 == **2.3 Configure server address ,data format and APN** ==
77
78 [[image:1765532738848-908.png||height="1078" width="500"]]
79
80 [[image:1765532795117-746.png||height="1068" width="500"]]
81
82 [[image:1765532866980-506.png||height="1069" width="500"]]
83
84 [[image:1765532883995-630.png||height="1072" width="500"]]
85
86 [[image:1765532923294-316.png||height="1069" width="501"]]
87
88
89
90
91
92
93
94 )))