Wiki source code of Dragino GE Version NB Device Quick Configuration Guide
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
7.1 | 1 | {{toc/}} |
| |
3.1 | 2 | |
| |
12.1 | 3 | = **1. General NB device configure to attach network (skip this step for 1TB devices)** = |
| |
3.1 | 4 | |
| |
12.1 | 5 | (% class="wikigeneratedid" id="HToattacheNB-IoTsensorstoNB-IoTNetwork2CYouneedto:" %) |
| |
8.2 | 6 | To attache NB-IoT sensors to NB-IoT Network, You need to: |
| |
3.1 | 7 | |
| |
14.1 | 8 | ((( |
| 9 | 1. Get a NB-IoT SIM card from Service Provider. (Not the same as the SIM card we use in mobile phone) | ||
| 10 | 1. Open the cover and power off End Node ( Take out the Jumper) | ||
| 11 | 1. UnsCrew and remove the module | ||
| |
12.1 | 12 | ))) |
| |
12.2 | 13 | |
| |
14.1 | 14 | ((( |
| |
12.2 | 15 | [[image:1767669624752-329.png||height="287" width="706"]] |
| |
12.1 | 16 | ))) |
| |
12.2 | 17 | |
| |
14.1 | 18 | ((( |
| 19 | (% start="4" %) | ||
| 20 | 1. Insert the SIM card to Sensor. ( See below for direction) | ||
| 21 | |||
| |
12.2 | 22 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/WebHome/image-20230808205045-1.png?width=438&height=293&rev=1.1||alt="image-20230808205045-1.png"]] |
| |
12.1 | 23 | ))) |
| |
13.1 | 24 | |
| |
14.1 | 25 | ((( |
| 26 | (% start="5" %) | ||
| 27 | 1. Install the module and tighten the screws, then Power On End Node.(Put the Jumper) | ||
| 28 | 1. Put the cover on and press and hold the push button for 5 seconds to restart the device. | ||
| |
13.1 | 29 | |
| |
14.2 | 30 | [[image:1767838844115-492.png]] |
| |
7.2 | 31 | |
| |
11.1 | 32 | ---- |
| 33 | |||
| |
7.2 | 34 | = **2. Configure via Mobile APP** = |
| 35 | |||
| 36 | == **2.1 Download APP** == | ||
| 37 | |||
| |
6.1 | 38 | (% class="wikigeneratedid" id="HDownloadfromGooglePlayStore" %) |
| |
14.3 | 39 | **Download from Google Play / APP Store** |
| |
3.1 | 40 | |
| |
14.3 | 41 | Open the Google Play Store, search for "Devices.tool", download and install.(If you can't find it, try searching for "Dragino".) |
| |
3.1 | 42 | |
| 43 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230134826-1.png?width=514&height=292&rev=1.1||alt="image-20241230134826-1.png" height="292" width="514"]] | ||
| 44 | |||
| 45 | |||
| |
7.2 | 46 | == **2.2 How to use BLE to configure Sensors** == |
| |
3.1 | 47 | |
| 48 | See Video Instruction: **[[Use BLE to configure Sensors>>url:https://youtube.com/shorts/Ajq2NvUslnw?feature=share]]** | ||
| 49 | |||
| |
4.1 | 50 | [[image:1765529492527-499.jpg||height="1084" width="504"]] |
| 51 | |||
| |
15.1 | 52 | |
| |
3.1 | 53 | Install in mobile and run. Press the reset button of the device to be tested, and then click **"SCAN BLUETOOTH DEVICES".** Find the correct device and connect(the correct device name should be the same as the DEV EUI of the device). |
| 54 | |||
| 55 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230135129-4.png?width=502&height=134&rev=1.1||alt="image-20241230135129-4.png" height="134" width="502"]] | ||
| 56 | |||
| |
4.1 | 57 | |
| |
3.1 | 58 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230152054-8.png?width=504&height=241&rev=1.1||alt="image-20241230152054-8.png" height="241" width="504"]] |
| 59 | |||
| 60 | After the connection is successful, enter the interface and click **"DIALOGBOX".** | ||
| 61 | |||
| 62 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230151129-6.png?width=507&height=413&rev=1.1||alt="image-20241230151129-6.png" height="413" width="507"]] | ||
| 63 | |||
| 64 | |||
| |
15.1 | 65 | Each device has unique password named **AT PIN**.(Printed on the inside of the packaging box) Input the password and you will be able to get access to the UART of the device. |
| 66 | |||
| |
3.1 | 67 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230152403-9.png?width=506&height=232&rev=1.1||alt="image-20241230152403-9.png" height="232" width="506"]] |
| 68 | |||
| 69 | Enter AT PIN + line break in the dialog box, click **"Send"**, and return the data display **"Password Correct"** to start configuring the AT command. | ||
| 70 | |||
| |
5.1 | 71 | [[image:1765530044476-685.png||height="1081" width="505"]] |
| |
3.1 | 72 | |
| |
15.1 | 73 | |
| |
3.1 | 74 | **Note:** |
| 75 | |||
| 76 | **Devices.Tool is now compatible with sending commands without line breaks, and supports the simultaneous configuration of multiple AT commands. A record is also automatically saved after an instruction is sent, and clicking on a command in the history will display it directly in the input box.** | ||
| 77 | |||
| 78 | |||
| |
7.2 | 79 | == **2.3 Configure server address ,data format and APN** == |
| |
3.1 | 80 | |
| |
6.1 | 81 | [[image:1765532738848-908.png||height="1078" width="500"]] |
| |
3.1 | 82 | |
| |
6.1 | 83 | [[image:1765532795117-746.png||height="1068" width="500"]] |
| |
3.1 | 84 | |
| |
15.1 | 85 | |
| 86 | **If you want uplink to ThingsEye, address configuration should be ~-~-- AT+SERVADDR=server1.thingseye.io,11560 ** | ||
| 87 | |||
| 88 | |||
| |
6.1 | 89 | [[image:1765532866980-506.png||height="1069" width="500"]] |
| |
3.1 | 90 | |
| |
15.1 | 91 | |
| 92 | **If you use dragino's SIM card, APN configuration should be ~-~-- AT+APN=iot.1nce.net** | ||
| 93 | |||
| |
6.1 | 94 | [[image:1765532883995-630.png||height="1072" width="500"]] |
| |
3.1 | 95 | |
| |
6.1 | 96 | [[image:1765532923294-316.png||height="1069" width="501"]] |
| |
3.1 | 97 | |
| 98 | |||
| 99 | |||
| 100 | |||
| 101 | |||
| 102 | |||
| |
14.2 | 103 | |
| 104 | ))) |