Version 17.1 by Alec Chen on 2026/01/08 14:03
Show last authors
1 {{toc/}}
2
3 = **1. General NB device configure to attach network (skip this step for 1TB devices)** =
4
5 (% class="wikigeneratedid" id="HToattacheNB-IoTsensorstoNB-IoTNetwork2CYouneedto:" %)
6 To attache NB-IoT sensors to NB-IoT Network, You need to:
7
8 (((
9 1. Get a NB-IoT SIM card from Service Provider. (Not the same as the SIM card we use in mobile phone)
10 1. Open the cover and power off End Node ( Take out the Jumper)
11 1. UnsCrew and remove the module
12 )))
13
14 (((
15 [[image:1767669624752-329.png||height="287" width="706"]]
16 )))
17
18 (((
19 (% start="4" %)
20 1. Insert the SIM card to Sensor. ( See below for direction)
21
22 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/WebHome/image-20230808205045-1.png?width=438&height=293&rev=1.1||alt="image-20230808205045-1.png"]]
23 )))
24
25 (((
26 (% start="5" %)
27 1. Install the module and tighten the screws, then Power On End Node.(Put the Jumper)
28 1. Put the cover on and press and hold the push button for 5 seconds to restart the device.
29
30 [[image:1767838844115-492.png]]
31
32 ----
33
34 = **2. Configure via Mobile APP** =
35
36 == **2.1 Download APP** ==
37
38 (% class="wikigeneratedid" id="HDownloadfromGooglePlayStore" %)
39 **Download from Google Play / APP Store**
40
41 Open the Google Play Store, search for "Devices.tool", download and install.(If you can't find it, try searching for "Dragino".)
42
43 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230134826-1.png?width=514&height=292&rev=1.1||alt="image-20241230134826-1.png" height="292" width="514"]]
44
45
46 == **2.2 How to use BLE to configure Sensors** ==
47
48 See Video Instruction: **[[Use BLE to configure Sensors>>url:https://youtube.com/shorts/Ajq2NvUslnw?feature=share]]**
49
50 [[image:1765529492527-499.jpg||height="1084" width="504"]]
51
52
53 Install in mobile and run. Press the reset button of the device to be tested, and then click **"SCAN BLUETOOTH DEVICES".** Find the correct device and connect(the correct device name should be the same as the DEV EUI of the device).
54
55 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230135129-4.png?width=502&height=134&rev=1.1||alt="image-20241230135129-4.png" height="134" width="502"]]
56
57
58 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230152054-8.png?width=504&height=241&rev=1.1||alt="image-20241230152054-8.png" height="241" width="504"]]
59
60 After the connection is successful, enter the interface and click **"DIALOGBOX".**
61
62 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230151129-6.png?width=507&height=413&rev=1.1||alt="image-20241230151129-6.png" height="413" width="507"]]
63
64
65 Each device has unique password named **AT PIN**.(Printed on the inside of the packaging box) Input the password and you will be able to get access to the UART of the device.
66
67 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230152403-9.png?width=506&height=232&rev=1.1||alt="image-20241230152403-9.png" height="232" width="506"]]
68
69 Enter AT PIN + line break in the dialog box, click **"Send"**, and return the data display **"Password Correct"** to start configuring the AT command.
70
71 [[image:1765530044476-685.png||height="1081" width="505"]]
72
73
74 **Note:**
75
76 **Devices.Tool is now compatible with sending commands without line breaks, and supports the simultaneous configuration of multiple AT commands. A record is also automatically saved after an instruction is sent, and clicking on a command in the history will display it directly in the input box.**
77
78
79 == **2.3 Configure server address ,data format and APN** ==
80
81 **Please note: **the iOS version of the software does not support the quick configuration feature and requires manual entry of the full command.
82
83 [[image:1767852004106-496.png||height="1075" width="502"]]
84
85
86 === **1) Configure data sending format** ===
87
88 === [[image:1767840291428-395.png||height="1071" width="500"]] ===
89
90 [[image:1765532795117-746.png||height="1068" width="500"]]
91
92
93 === **2) Configure server address** ===
94
95 **If you want uplink to ThingsEye, address configuration should be ~-~-- AT+SERVADDR=server1.thingseye.io,11560 **
96
97 [[image:1767840253208-908.png||height="1068" width="499"]]
98
99 [[image:1765532866980-506.png||height="1069" width="500"]]
100
101
102 === **3)Configure the SIM card server address (APN).** ===
103
104 **If you use dragino's SIM card, APN configuration should be ~-~-- AT+APN=iot.1nce.net**
105
106 [[image:1765532883995-630.png||height="1072" width="500"]]
107
108 [[image:1765532923294-316.png||height="1069" width="501"]]
109 )))