Version 4.1 by Alec Chen on 2025/12/12 16:58
Show last authors
1
2
3
4
5 == 1.Configure via Mobile APP ==
6
7 === 1.1 Download APP ===
8
9 ==== **Download from Google Play Store** ====
10
11 Open the Google Play Store, search for "Devices.tool", download and install.
12
13 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230134826-1.png?width=514&height=292&rev=1.1||alt="image-20241230134826-1.png" height="292" width="514"]]
14
15 ==== **Download from Dropbox** ====
16
17 Click on the URL below to enter Dropbox to download the app:
18
19 [[Download link>>url:https://www.dropbox.com/scl/fo/gyscmfn1s03oz3n8rif8w/AJW7JoMQsQ56dtlls2SNf9c?rlkey=3q2cxwriyzh26vuairx01yebc&st=be5jv92w&dl=0]]
20
21
22 === 1.2 How to use BLE to configure Sensors ===
23
24 See Video Instruction: **[[Use BLE to configure Sensors>>url:https://youtube.com/shorts/Ajq2NvUslnw?feature=share]]**
25
26 [[image:1765529492527-499.jpg||height="1084" width="504"]]
27
28 Install in mobile and run. Press the reset button of the device to be tested, and then click **"SCAN BLUETOOTH DEVICES".** Find the correct device and connect(the correct device name should be the same as the DEV EUI of the device).
29
30 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230135129-4.png?width=502&height=134&rev=1.1||alt="image-20241230135129-4.png" height="134" width="502"]]
31
32
33 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230152054-8.png?width=504&height=241&rev=1.1||alt="image-20241230152054-8.png" height="241" width="504"]]
34
35 After the connection is successful, enter the interface and click **"DIALOGBOX".**
36
37 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230151129-6.png?width=507&height=413&rev=1.1||alt="image-20241230151129-6.png" height="413" width="507"]]
38
39 Each device has unique password named **AT PIN**. Input the password and you will be able to get access to the UART of the device.
40
41 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230152403-9.png?width=506&height=232&rev=1.1||alt="image-20241230152403-9.png" height="232" width="506"]]
42
43 Enter AT PIN + line break in the dialog box, click **"Send"**, and return the data display **"Password Correct"** to start configuring the AT command.
44
45 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230151602-7.png?width=348&height=568&rev=1.1||alt="image-20241230151602-7.png" height="568" width="348"]]
46
47 **Note:**
48
49 **Devices.Tool is now compatible with sending commands without line breaks, and supports the simultaneous configuration of multiple AT commands. A record is also automatically saved after an instruction is sent, and clicking on a command in the history will display it directly in the input box.**