Last modified by Alec Chen on 2025/12/12 17:55
Show last authors
1 {{toc/}}
2
3 = **Configure via Mobile APP** =
4
5 == **1. Download APP** ==
6
7 (% class="wikigeneratedid" id="HDownloadfromGooglePlayStore" %)
8 **Download from Google Play Store**
9
10 Open the Google Play Store, search for "Devices.tool", download and install.
11
12 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230134826-1.png?width=514&height=292&rev=1.1||alt="image-20241230134826-1.png" height="292" width="514"]]
13
14 (% class="wikigeneratedid" id="HDownloadfromDropbox" %)
15 **Download from Dropbox**
16
17 Click on the URL below to enter Dropbox to download the app:
18
19 [[Download link>>url:https://www.dropbox.com/scl/fo/gyscmfn1s03oz3n8rif8w/AJW7JoMQsQ56dtlls2SNf9c?rlkey=3q2cxwriyzh26vuairx01yebc&st=be5jv92w&dl=0]]
20
21
22 == **2. How to use BLE to configure Sensors** ==
23
24 See Video Instruction: **[[Use BLE to configure Sensors>>url:https://youtube.com/shorts/Ajq2NvUslnw?feature=share]]**
25
26 [[image:1765529492527-499.jpg||height="1084" width="504"]]
27
28 Install in mobile and run. Press the reset button of the device to be tested, and then click **"SCAN BLUETOOTH DEVICES".** Find the correct device and connect(the correct device name should be the same as the DEV EUI of the device).
29
30 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230135129-4.png?width=502&height=134&rev=1.1||alt="image-20241230135129-4.png" height="134" width="502"]]
31
32
33 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230152054-8.png?width=504&height=241&rev=1.1||alt="image-20241230152054-8.png" height="241" width="504"]]
34
35 After the connection is successful, enter the interface and click **"DIALOGBOX".**
36
37 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230151129-6.png?width=507&height=413&rev=1.1||alt="image-20241230151129-6.png" height="413" width="507"]]
38
39 Each device has unique password named **AT PIN**. Input the password and you will be able to get access to the UART of the device.
40
41 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/BLE%20Bluetooth%20Remote%20Configure/WebHome/image-20241230152403-9.png?width=506&height=232&rev=1.1||alt="image-20241230152403-9.png" height="232" width="506"]]
42
43 Enter AT PIN + line break in the dialog box, click **"Send"**, and return the data display **"Password Correct"** to start configuring the AT command.
44
45 [[image:1765530044476-685.png||height="1081" width="505"]]
46
47 **Note:**
48
49 **Devices.Tool is now compatible with sending commands without line breaks, and supports the simultaneous configuration of multiple AT commands. A record is also automatically saved after an instruction is sent, and clicking on a command in the history will display it directly in the input box.**
50
51
52 == **3. Configure server address ,data format and APN** ==
53
54 [[image:1765532738848-908.png||height="1078" width="500"]]
55
56 [[image:1765532795117-746.png||height="1068" width="500"]]
57
58 [[image:1765532866980-506.png||height="1069" width="500"]]
59
60 [[image:1765532883995-630.png||height="1072" width="500"]]
61
62 [[image:1765532923294-316.png||height="1069" width="501"]]
63
64
65
66
67
68
69
70
71