Changes for page Fuel Level Monitoring

Last modified by Hera Guo on 2025/01/10 16:08
From version 3.1
edited by Hera Guo
on 2024/11/27 16:23
Change comment: There is no comment for this version
To version 1.1
edited by Hera Guo
on 2024/11/27 14:59
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -4,32 +4,36 @@
4 4  
5 5  = 1. About this demo =
6 6  
7 -This template is a display template for fuel level monitoring, in this template you can see the location of the tank, fuel capacity, temperature etc. and supports alarm settings. It has two levels of dashboards as shown below.
7 +This case is the display interface of the water meter, using this case you can analyze the water consumption, including daily water consumption, weekly water consumption, whether the water leakage and so on.  It has 7 display screens described as follows：
8 8  
9 -* **First Level - Overview for all tanks**:The **main state** is designed to monitor the remaining fuel and control the placement of tanks, device management, and the alarm system. This page contains the following elements:
9 +* **First Screen - TOTAL:** This dashboard includes information on all metered devices, water usage analysis, device activity, number of low battery devices, alarms, etc.
10 10  
11 - The section with an //**interactive map**// displays the location of the tanks with the help of markers. The marker also informs about the current status of the sensor, namely: green - the sensor is in a normal state, and the rules for triggering alarms are not applied; yellow - low battery; red - at least one of the conditions for starting a warning, for example, a low level of fuel remaining or low/high temperature, is used; gray - the sensor  is in mode offline. To get more information, click on the tank marker - a popup with detailed information will appear.
11 +[[image:1732676159360-564.png||height="757" width="1461"]]
12 12  
13 - The user can use the map filter - map switches that will help sort the display according to requirements.
13 +* **second Screen - ANALYTICS:** This dashboard is an analysis of the water use situation
14 14  
15 - The //**Tanks section**// is a list designed to display all existing tanks. You can delete or edit existing ones. The main list of “Tanks” contains the following data: “Total label”, “Remaining, %”, “Temperature”, “Battery”, “Connection” and action buttons. The user can create/add new sensors by clicking on the "+" button. To create a sensor, the user must go through the following steps: "General info", "Tank info," and "Set location". Note  That we provided the ability to add and define nine types of tanks, which we can calculate based on their geometric parameters. See detailed information in the **"Tank Creation"** paragraph.
15 +[[image:1732676203292-795.png||height="747" width="1460"]]
16 16  
17 - The //**Alarms section**// is designed to display all alarms related to the remaining fuel level, temperature, and battery level. You can set the conditions under which alarms will be triggered by clicking the “Alarm Rules” button. By default, the following types of alarms are defined: “Low battery level”, “Low temperature”, “High temperature” and “Low remaining level”.
17 +* **third Screen-DEVICES:**This dashboard shows all water meters and their alarms.
18 18  
19 -* **second Level - Sensor Level**: **Tank state** is designed to display information about a specific tank. This page contains the following elements: 
19 +[[image:1732676234856-600.png||height="759" width="1461"]]
20 20  
21 - Fuel remaining display widget;
21 +* **fourth Screen-CUSTOMERS:**This dashboard is an overview of all customers
22 22  
23 - Section for displaying detailed tank information: “Tank Name”, “Serial number”, “Liquid type”, “Tank temperature”, “Battery level”, “Connection” and “Last Update”. Also, using the functionality of this section, you can edit the main fields - for this, click the "Edit" button, as well as change the location of the tank, and the marker on the map - by clicking on the "Edit Map" button;
23 +[[image:1732676273563-896.png||height="756" width="1466"]]
24 24  
25 - The Consumption and remaining fuel section is a table with a list of consumption, remaining, and fuel replenishment. The ability to monitor the duration of refueling or filling the tank with fuel and the timestamp of the action has also been added;
25 +* **fifth Screen-ALARMS:**This dashboard displays all alert messages
26 26  
27 - The Remaining chart is designed to display the statistics of the tank's remaining and fuel consumption in the form of a graph, which is shown in terms of volume/% and time intervals;
27 +[[image:1732676305413-205.png||height="752" width="1465"]]
28 28  
29 - The Alarm section is a list of alarms for a specific tank.
29 +* **sixth  Screen-SETTINGS:**This dashboard allows you to set alarm thresholds and whether to send alarm messages to Email or SMS.
30 30  
31 -[[image:屏幕截图 2024-11-27 150313.png||height="394" width="756"]][[image:Arrow.png]][[image:屏幕截图 2024-11-27 150340.png||height="388" width="750"]]
31 +[[image:1732676367273-261.png||height="758" width="1463"]]
32 32  
33 +* **Seventh Screen-DEVICE DETAIL:**This dashboard is detailed for a single device
34 +
35 +[[image:屏幕截图 2024-11-27 104148.png||height="760" width="1464"]]
36 +
33 33  = 2.Import Solution Template =
34 34  
35 35  == 2.1 Get the json files ==
... ... @@ -55,7 +55,7 @@
55 55  
56 56  select "import rule chain", and then drag the downloaded JSON file with the suffix "_rule_chain" into the text box
57 57  
58 -[[image:屏幕截图 2024-11-26 174215.png||height="785" width="1542"]]
62 +[[image:屏幕截图 2024-11-26 174215.png||height="753" width="1481"]]
59 59  
60 60  === 2.2.2 Import deviceprofile ===
61 61  
... ... @@ -65,7 +65,7 @@
65 65  
66 66  and then select the file with the suffix "_device_defiles" that we have already downloaded. Drag it into the text box.
67 67  
68 -[[image:屏幕截图 2024-11-26 175041.png||height="745" width="1545"]]
72 +[[image:屏幕截图 2024-11-26 175041.png||height="713" width="1478"]]
69 69  
70 70  === 2.2.3 Import dashboard ===
71 71  
... ... @@ -75,8 +75,9 @@
75 75  
76 76  then we shoud drag the downloaded _dashboard file into the text box.
77 77  
78 -[[image:屏幕截图 2024-11-26 175723.png||height="759" width="1548"]]
82 +[[image:屏幕截图 2024-11-26 175723.png||height="723" width="1475"]]
79 79  
84 +
80 80  = 3.Connecting devices to thingseye =
81 81  
82 82  Click the link below to connect the server to the platform：
... ... @@ -87,11 +87,10 @@
87 87  
88 88   When our import is complete, we need to replace the deviceprofile of the device we want to show with our newly imported deviceprofile.
89 89  
90 -[[image:屏幕截图 2024-11-26 180544.png||height="772" width="1551"]]
95 +[[image:屏幕截图 2024-11-26 180544.png||height="734" width="1475"]]
91 91  
92 -
93 93  = 5.Check to see if the device is displaying properly on the dashboard =
94 94  
95 -[[image:屏幕截图 2024-11-27 150313.png||height="797" width="1532"]]
99 +[[image:1732677677740-417.png]]
96 96  
97 -* Note: The dashboard will display properly only if our device has the key values **battery, fuelLevel, fuelHeight, temperature .**
101 +* Note: The dashboard will display properly only if our device has the key values **pulseCounter** 、 **battery、leakage**、**temperature、Calculate_flag.**
Arrow.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.hera
Size
... ... @@ -1,1 +1,0 @@
1 -447 bytes
Content
屏幕截图 2024-11-26 174215.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.hera
Size
... ... @@ -1,1 +1,0 @@
1 -263.6 KB
Content
屏幕截图 2024-11-26 175041.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.hera
Size
... ... @@ -1,1 +1,0 @@
1 -254.2 KB
Content
屏幕截图 2024-11-26 175723.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.hera
Size
... ... @@ -1,1 +1,0 @@
1 -299.1 KB
Content
屏幕截图 2024-11-26 180544.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.hera
Size
... ... @@ -1,1 +1,0 @@
1 -237.6 KB
Content
屏幕截图 2024-11-27 150313.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.hera
Size
... ... @@ -1,1 +1,0 @@
1 -1.8 MB
Content
屏幕截图 2024-11-27 150340.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.hera
Size
... ... @@ -1,1 +1,0 @@
1 -160.2 KB
Content