Last modified by Alec Chen on 2025/04/02 18:03
From version 4.1
edited by Alec Chen
on 2025/04/02 16:30
Change comment: There is no comment for this version
To version 3.1
edited by Alec Chen
on 2025/04/02 16:29
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,7 +1,5 @@
1 1  **Table of Contents:**
2 2  
3 -{{toc/}}
4 -
5 5  = 1. Introduction =
6 6  
7 7  This document guides you on integrating Dragino **-NB** and **-CB** series devices data with Thingseye.
... ... @@ -39,9 +39,9 @@
39 39  
40 40  [[image:https://wiki.dragino.com/xwiki/bin/download/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/WebHome/image-20230802112413-5.png?width=987&height=530&rev=1.1||alt="image-20230802112413-5.png" height="530" width="987"]]
41 41  
42 -(% class="mark small text-uppercase" %)##**Notice: MQTT protocol has a much higher power consumption compare with UDP/CoAP protocol. Please check the power analyze document and adjust the uplink**##
40 +(% class="text-uppercase small mark" %)##**Notice: MQTT protocol has a much higher power consumption compare with UDP/CoAP protocol. Please check the power analyze document and adjust the uplink**##
43 43  
44 -(% class="mark small text-uppercase" %)##**period to a suitable interval.**##
42 +(% class="text-uppercase small mark" %)##**period to a suitable interval.**##
45 45  
46 46  = 4. Data Converters =
47 47  
... ... @@ -243,8 +243,10 @@
243 243  [[image:1743582084494-111.png]]
244 244  
245 245  
246 -= 6. Configure Physical NB-IoT Sensor =
247 247  
245 +
246 += 8. Configure Physical NB-IoT Sensor =
247 +
248 248  Now, let's experiment with sending data to Thingseye using a real NB-IoT device. For example, we will use the **TS01-NB**.
249 249  
250 250  First, configure the NB-IoT device with the necessary MQTT settings using AT commands. Below is a list of AT commands you can use.