1.Overview
When you receive the gateway, you need to register the gateway to the server for it to work properly, here are the instructions for registering the gateway to the server
2.Register to chirpstack（Semtech UDP for ChirpStack v4）
2.1 Configuring the Gateway
2.1.1 Connect to gateway wifi
Wi-Fi Name：dragino-xxxxx Passphrase：dragino+dragino |
2.1.2 Enter the gateway management interface
Ip address：http://10.130.1.1/
user ID：root
Passphrase：dragino
2.1.3 Configure the gateway to connect to wifi
If your gateway is networked with wifi, you need to configure the gateway's networking wifi as follows:
2.1.4 Configure the gateway
2.2 Connect to chirpstack
2.3 Checking gateway Status
