Dragino Gateway & LoRaWAN Device Quick Configuration Guide

Version 15.5 by Alec Chen on 2026/01/08 16:27

Table of Contents:

1.Overview
2. Configuring Gateway
3.Register to ttn

1.Overview

When you receive the gateway, you need to register the gateway to the server for it to work properly, here are the instructions for registering the gateway to the server

2. Configuring Gateway

2.1.1 Connect to gateway wifi

When the gateway starts up for the first time, it will automatically generate a WiFi network named dragino-xxxxxx with the password dragino+dragino.

Wi-Fi Name：dragino-xxxxx

Passphrase：dragino+dragino

2.1.2 Enter the gateway management interface

After connecting to the gateway's Wi-Fi, open a browser on your computer and enter the LPS8N's IP address

Ip address：http://10.130.1.1/

username：root

Passphrase：dragino

2.1.3 Configure the gateway to connect to wifi

If your gateway is networked with wifi, you need to configure the gateway's networking wifi as follows:

2.1.4 Configure the server addresss and port

For Ins servers,the bands and ports are fixed as follows:

For lns servers, the bands and ports are fixed as follows:

1706 ------------------------------------------------------------eu868
1705-------------------------------------------------------------as923
1700-------------------------------------------------------------us915

(Only used by lns1 servers, no other distinction is made)