Wiki source code of Dragino Gateway & LoRaWAN Device Quick Configuration Guide
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | **Table of Contents:** | ||
| 2 | |||
| 3 | {{toc/}} | ||
| 4 | |||
| 5 | = 1.Overview = | ||
| 6 | |||
| 7 | When you receive the gateway, you need to register the gateway to the server for it to work properly, here are the instructions for registering the gateway to the server | ||
| 8 | |||
| 9 | = 2. Configuring Gateway = | ||
| 10 | |||
| 11 | === 2.1.1 Connect to gateway wifi === | ||
| 12 | |||
| 13 | When the gateway starts up for the first time, it will automatically generate a WiFi network **named dragino-xxxxxx **with the** password dragino+dragino.** | ||
| 14 | |||
| 15 | [[image:1767853615470-285.png]] | ||
| 16 | |||
| 17 | |(% colspan="5" %)((( | ||
| 18 | **Wi-Fi Name**:dragino-xxxxx | ||
| 19 | |||
| 20 | **Passphrase**:dragino+dragino | ||
| 21 | ))) | ||
| 22 | |||
| 23 | === 2.1.2 Enter the gateway management interface === | ||
| 24 | |||
| 25 | After connecting to the gateway's Wi-Fi, open a browser on your computer and enter the LPS8N's IP address | ||
| 26 | |||
| 27 | **Ip address**:[[http:~~/~~/10.130.1.1/>>http://10.130.1.1/]] | ||
| 28 | |||
| 29 | **username**:root | ||
| 30 | |||
| 31 | **Passphrase**:dragino | ||
| 32 | |||
| 33 | [[image:1767854133259-649.png]] | ||
| 34 | |||
| 35 | |||
| 36 | === 2.1.3 Configure the gateway to connect to wifi === | ||
| 37 | |||
| 38 | (% class="box warningmessage" %) | ||
| 39 | ((( | ||
| 40 | **Remember to click "Save" in the bottom left corner after each of the following steps!** | ||
| 41 | ))) | ||
| 42 | |||
| 43 | If your gateway is networked with wifi, you need to configure the gateway's networking wifi as follows: | ||
| 44 | |||
| 45 | (% class="wikigeneratedid" id="H2.1.4A0Configurethegateway" %) | ||
| 46 | [[image:1734658621340-740.png]] | ||
| 47 | |||
| 48 | |||
| 49 | === 2.1.4 Configure the server addresss === | ||
| 50 | |||
| 51 | For Ins servers,the bands and ports are fixed as follows: | ||
| 52 | [[image:1734658928659-513.png]] | ||
| 53 | |||
| 54 | |||
| 55 | === **2.1.5 Configure the server Port and Frequen** === | ||
| 56 | |||
| 57 | (% class="box warningmessage" %) | ||
| 58 | ((( | ||
| 59 | **The gateway frequency band must be consistent with the device. Please confirm the frequency band used by the device with Dragino team.** | ||
| 60 | ))) | ||
| 61 | |||
| 62 | |((( | ||
| 63 | For lns servers, the bands and ports are fixed as follows: | ||
| 64 | |||
| 65 | 1706 ~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-eu868 | ||
| 66 | 1705~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~--as923 | ||
| 67 | 1700~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~--us915 | ||
| 68 | |||
| 69 | (Only used by lns1 servers, no other distinction is made) | ||
| 70 | ))) | ||
| 71 | |||
| 72 | [[image:1739178122182-350.png||height="774" width="1170"]] | ||
| 73 | |||
| 74 | [[image:1767861149845-587.png||height="624" width="1171"]] | ||
| 75 | |||
| 76 | ---- | ||
| 77 | |||
| 78 | == == |