Version 21.1 by Alec Chen on 2026/01/08 17:36
Show last authors
1 **Table of Contents:**
2
3 {{toc/}}
4
5 = **1.Overview** =
6
7 When you receive the gateway, you need to register the gateway to the server for it to work properly, here are the instructions for registering the gateway to the server
8
9 = **2. Configuring gateway** =
10
11 == **2.1Connect to gateway wifi** ==
12
13 When the gateway starts up for the first time, it will automatically generate a WiFi network **named dragino-xxxxxx.**
14
15
16 **Wi-Fi Name**：dragino-xxxxx
17
18 **Passphrase**：dragino+dragino
19
20 [[image:1767853615470-285.png]]
21
22 ----
23
24 == **2.2 Enter the gateway management interface** ==
25
26 After connecting to the gateway's Wi-Fi, open a browser on your computer and enter the LPS8N's IP address
27
28 **Ip address**：[[http:~~/~~/10.130.1.1/>>http://10.130.1.1/]]
29
30 **username**：root
31
32 **Passphrase**：dragino
33
34 [[image:1767854133259-649.png]]
35
36
37 == **2.3 Configure the gateway to connect to wifi** ==
38
39 (% class="box warningmessage" %)
40 (((
41 **Remember to click "Save" in the bottom left corner after each of the following steps!**
42 )))
43
44 If your gateway is networked with wifi, you need to configure the gateway's networking wifi as follows:
45
46 (% class="wikigeneratedid" id="H2.1.4A0Configurethegateway" %)
47 [[image:1734658621340-740.png]]
48
49
50 == **2.4 Configure the server addresss** ==
51
52 For Ins servers,the bands and ports are fixed as follows:
53 [[image:1734658928659-513.png]]
54
55
56 == 2.5 Configure the server Port and Frequen ==
57
58 (% class="box warningmessage" %)
59 (((
60 **The gateway frequency band must be consistent with the device. Please confirm the frequency band used by the device with Dragino team.**
61 )))
62
63 |(((
64 For lns servers, the bands and ports are fixed as follows:
65
66 1706 ~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-eu868
67 1705~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~--as923
68 1700~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~--us915
69
70 (Only used by lns1 servers, no other distinction is made)
71 )))
72
73 [[image:1739178122182-350.png||height="774" width="1170"]]
74
75 [[image:1767861149845-587.png||height="624" width="1171"]]
76
77 ----
78
79 = **3. Registered device on ThingsEye** =
80
81 (% class="box warningmessage" %)
82 (((
83 All gateways and devices must register with ThingsEye before uploading data to be received. This prevents ThingsEye from receiving unnecessary device information.
84 )))
85
86 == **3.1 Registered gateway** ==
87
88 Input gateway ID then restart gateway, check whether be online.
89
90 [[image:1767863501570-866.png]]
91
92 [[image:1767863551792-737.png||height="664" width="1145"]]
93
94 ----
95
96 == **3.2 Registered LoRa devices** ==
97
98 **1)** **Single device registration:** Input device's information、select frequency & device type. Then restart devices check whether be online.
99
100 [[image:1767863791922-284.png]]
101
102 [[image:1767864140066-308.png||height="467" width="1142"]]
103
104 ----
105
106 **2) Batch registration of devices: **Import device key file、select frequency & device type. Then restart devices check whether be online.
107
108 [[image:1767864723156-616.png]]
109
110 [[image:1767864541390-300.png||height="441" width="1140"]]