Wiki source code of Dragino Gateway & LoRaWAN Device Quick Configuration Guide
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
5.1 | 1 | **Table of Contents:** |
| 2 | |||
| 3 | {{toc/}} | ||
| 4 | |||
| |
18.2 | 5 | = **1.Overview** = |
| |
1.1 | 6 | |
| 7 | When you receive the gateway, you need to register the gateway to the server for it to work properly, here are the instructions for registering the gateway to the server | ||
| 8 | |||
| |
18.2 | 9 | = **2. Configuring gateway** = |
| |
1.1 | 10 | |
| |
20.1 | 11 | == **2.1Connect to gateway wifi** == |
| |
1.1 | 12 | |
| |
21.1 | 13 | When the gateway starts up for the first time, it will automatically generate a WiFi network **named dragino-xxxxxx.** |
| |
14.2 | 14 | |
| 15 | |||
| |
1.1 | 16 | **Wi-Fi Name**：dragino-xxxxx |
| 17 | |||
| 18 | **Passphrase**：dragino+dragino | ||
| 19 | |||
| |
21.1 | 20 | [[image:1767853615470-285.png]] |
| 21 | |||
| 22 | ---- | ||
| 23 | |||
| |
20.1 | 24 | == **2.2 Enter the gateway management interface** == |
| |
1.1 | 25 | |
| |
14.2 | 26 | After connecting to the gateway's Wi-Fi, open a browser on your computer and enter the LPS8N's IP address |
| 27 | |||
| |
1.1 | 28 | **Ip address**：[[http:~~/~~/10.130.1.1/>>http://10.130.1.1/]] |
| 29 | |||
| |
14.3 | 30 | **username**：root |
| |
1.1 | 31 | |
| 32 | **Passphrase**：dragino | ||
| 33 | |||
| |
14.3 | 34 | [[image:1767854133259-649.png]] |
| |
14.1 | 35 | |
| |
15.1 | 36 | |
| |
20.1 | 37 | == **2.3 Configure the gateway to connect to wifi** == |
| |
1.1 | 38 | |
| |
16.1 | 39 | (% class="box warningmessage" %) |
| 40 | ((( | ||
| 41 | **Remember to click "Save" in the bottom left corner after each of the following steps!** | ||
| 42 | ))) | ||
| 43 | |||
| |
1.1 | 44 | If your gateway is networked with wifi, you need to configure the gateway's networking wifi as follows: |
| 45 | |||
| |
12.1 | 46 | (% class="wikigeneratedid" id="H2.1.4A0Configurethegateway" %) |
| 47 | [[image:1734658621340-740.png]] | ||
| |
1.1 | 48 | |
| |
14.1 | 49 | |
| |
20.1 | 50 | == **2.4 Configure the server addresss** == |
| |
13.1 | 51 | |
| |
15.4 | 52 | For Ins servers,the bands and ports are fixed as follows: |
| |
15.6 | 53 | [[image:1734658928659-513.png]] |
| |
15.4 | 54 | |
| |
15.6 | 55 | |
| |
20.1 | 56 | == 2.5 Configure the server Port and Frequen == |
| |
15.6 | 57 | |
| |
18.1 | 58 | (% class="box warningmessage" %) |
| 59 | ((( | ||
| 60 | **The gateway frequency band must be consistent with the device. Please confirm the frequency band used by the device with Dragino team.** | ||
| 61 | ))) | ||
| 62 | |||
| |
15.4 | 63 | |((( |
| |
15.5 | 64 | For lns servers, the bands and ports are fixed as follows: |
| |
15.4 | 65 | |
| |
15.5 | 66 | 1706 ~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-eu868 |
| 67 | 1705~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~--as923 | ||
| 68 | 1700~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~--us915 | ||
| |
15.4 | 69 | |
| |
15.5 | 70 | (Only used by lns1 servers, no other distinction is made) |
| |
15.4 | 71 | ))) |
| 72 | |||
| |
14.1 | 73 | [[image:1739178122182-350.png||height="774" width="1170"]] |
| 74 | |||
| |
15.7 | 75 | [[image:1767861149845-587.png||height="624" width="1171"]] |
| |
14.1 | 76 | |
| 77 | ---- | ||
| 78 | |||
| |
20.1 | 79 | = **3. Registered device on ThingsEye** = |
| |
18.2 | 80 | |
| 81 | (% class="box warningmessage" %) | ||
| 82 | ((( | ||
| 83 | All gateways and devices must register with ThingsEye before uploading data to be received. This prevents ThingsEye from receiving unnecessary device information. | ||
| 84 | ))) | ||
| 85 | |||
| |
20.1 | 86 | == **3.1 Registered gateway** == |
| |
18.2 | 87 | |
| 88 | Input gateway ID then restart gateway, check whether be online. | ||
| 89 | |||
| 90 | [[image:1767863501570-866.png]] | ||
| 91 | |||
| 92 | [[image:1767863551792-737.png||height="664" width="1145"]] | ||
| 93 | |||
| 94 | ---- | ||
| 95 | |||
| |
20.1 | 96 | == **3.2 Registered LoRa devices** == |
| |
18.2 | 97 | |
| |
18.3 | 98 | **1)** **Single device registration:** Input device's information、select frequency & device type. Then restart devices check whether be online. |
| |
18.2 | 99 | |
| 100 | [[image:1767863791922-284.png]] | ||
| 101 | |||
| |
18.3 | 102 | [[image:1767864140066-308.png||height="467" width="1142"]] |
| |
18.2 | 103 | |
| |
18.3 | 104 | ---- |
| |
18.2 | 105 | |
| |
18.3 | 106 | **2) Batch registration of devices: **Import device key file、select frequency & device type. Then restart devices check whether be online. |
| 107 | |||
| 108 | [[image:1767864723156-616.png]] | ||
| 109 | |||
| 110 | [[image:1767864541390-300.png||height="441" width="1140"]] | ||
| |
22.1 | 111 | |
| 112 | |||
| |
23.1 | 113 | = 4.What should I do if I imported dashboard but can't see any data? = |
| |
22.1 | 114 | |
| 115 | [[What should I do if I imported dashboard but can't see any data?>>url:https://wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20replace%20the%20data%20source%20of%20the%20dashboard%20widgets/]] |