Version 2.1 by Alec Chen on 2026/01/19 11:33
Hide last authors
Alec Chen 2.1 1 = **1. Replace data source** =
2
Alec Chen 1.1 3 Sometimes, because the device adds a new data source or the key is different from the key used by the dashboard in its default search, data may not be displayed.
4
5 [[image:1768791529794-486.png]]
Alec Chen 2.1 6
7
8 **In this situation, it is necessary to confirm the actual key of the data in the telemetry and redirect the data source.**
9
10
11 Open both the dashboard and device windows simultaneously.
12
13 [[image:1768791708487-637.png]]
14
15
16 Open the device telemetry data section
17
18 [[image:1768791784804-476.png||height="895" width="1400"]]
19
20
21 Enter the dashboard editing mode
22
23 [[image:1768791814855-940.png]]
24
25
26 Move the cursor above the dashboard you want to edit, and click the edit button in the floating window.
27
28 [[image:1768791848754-495.png]]
29
30
31 Delete old data source
32
33 [[image:1768792151055-498.png]]
34
35
36 Open the Devices page and copy right telemetry key
37
38 [[image:1768792441247-973.png||height="1160" width="1693"]]
39
40
41 Paste and Save
42
43 [[image:1768792794314-409.png]]
44
45
46 [[image:1768792885429-714.png]]
47
48
49 [[image:1768792948904-891.png]]
50
51
52 [[image:1768792927074-301.png]]
53
54 ----
55
56 = **2. Change the display time span** =
57
58 Sometimes, even after changing the key, data may not be displayed. In this case, you need to check the last upload time of the data and appropriately extend the data display time.
59
60 [[image:1768793333592-239.png]]
61
62
63 [[image:1768793365640-167.png]]
64
65
66 [[image:1768793414994-101.png]]
67
68
69 [[image:1768793442892-111.png]]
70
71
72 [[image:1768793460095-255.png]]