Wiki source code of Demo for Smart Office, Factory
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
11.1 | 1 | **Table of Contents:** |
| 2 | |||
| 3 | {{toc/}} | ||
| 4 | |||
| 5 | |||
| 6 | |||
| 7 | |||
 |
2.1 | 8 | = 1. About this demo = |
| 9 | |||
| 10 | This demo is to show the installation for various sensors in Dragino Office, Dragino Facotry & ThingsEye Office. It covers various types of sensors such as Temperature, Humidity, CO2, Water Flow, Vibration & many many. | ||
| 11 | |||
| 12 | User can check this [[Public Share Link>>https://thingseye.io/dashboard/d17f70f0-6b5f-11ef-a329-6fb88c149adb?publicId=33180810-5c40-11ef-a329-6fb88c149adb ]] and see the dash board for this demo. The dash board keeps updating, while the main structure will keep the same. It has **Three Level DashBoard **as decribe below. | ||
| 13 | |||
| 14 | * **First Level - Overview for all branches**: This dashboard shows all branches overview status and location. | ||
| 15 | * **Second Level - Branch Level**: This dashboard shows all sensors installation and status in the selected branch. | ||
| 16 | * **Third Level - Sensor Level**: This dashboard shows the detail reading for a specify sensor | ||
| 17 | |||
| |
4.1 | 18 | [[image:Level1.png||height="133" width="298"]] [[image:Arrow.png||height="27" width="51"]] [[image:Level2.png||height="134" width="264"]][[image:Arrow.png||height="27" width="51"]] [[image:2024-09-26 23-47-06.png||height="130" width="256"]] |
| |
5.1 | 19 | |
| 20 | |||
| 21 | The rest of this chapter will provide the introduction for how to set up similiar solution. | ||
| 22 | |||
| 23 | |||
| |
14.1 | 24 | = 2.Some basic configuration instructions = |
| |
5.1 | 25 | |
| |
14.1 | 26 | When you start a complex IoT project, you first need to learn some basic configuration methods for ThingsEye. |
| |
5.1 | 27 | |
| |
14.1 | 28 | Here are some instructions you need to know： |
| |
5.1 | 29 | |
| |
14.1 | 30 | Dashboard creation and some basic configurations:[[https:~~/~~/wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20import%20and%20use%20the%20dashboard%3F/#H3.2.2.1CreatA0alarm>>https://wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20import%20and%20use%20the%20dashboard%3F/#H3.2.2.1CreatA0alarm]] |
| |
5.1 | 31 | |
| |
14.1 | 32 | Ruke chain creation:[[https:~~/~~/wiki.thingseye.io/xwiki/bin/view/Main/Basic%20configuration%20of%20rule%20chains>>https://wiki.thingseye.io/xwiki/bin/view/Main/Basic%20configuration%20of%20rule%20chains/]] |
| |
5.1 | 33 | |
| |
14.1 | 34 | Devices connected to thingseye：[[https:~~/~~/wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20connect%20my%20devices%20to%20ThingsEye%3F/>>https://wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20connect%20my%20devices%20to%20ThingsEye%3F/]] |
| |
5.1 | 35 | |
| |
14.1 | 36 | = 3.MHierarchical architectureore features = |
| |
5.1 | 37 | |
| |
14.1 | 38 | = 5. = |