Wiki source code of Demo for Smart Office, Factory

Version 42.1 by Hera Guo on 2024/11/07 09:45
Show last authors
1 **Table of Contents:**
2
3 {{toc/}}
4
5
6
7
8 = 1. About this demo =
9
10 This demo is to show the installation for various sensors in Dragino Office, Dragino Facotry & ThingsEye Office. It covers various types of sensors such as Temperature, Humidity, CO2, Water Flow, Vibration & many many.
11
12 User can check this [[Public Share Link>>https://thingseye.io/dashboard/d17f70f0-6b5f-11ef-a329-6fb88c149adb?publicId=33180810-5c40-11ef-a329-6fb88c149adb ]] and see the dash board for this demo. The dash board keeps updating, while the main structure will keep the same. It has **Three Level DashBoard **as decribe below.
13
14 * **First Level - Overview for all branches**: This dashboard shows all branches overview status and location.
15 * **Second Level - Branch Level**: This dashboard shows all sensors installation and status in the selected branch.
16 * **Third Level - Sensor Level**: This dashboard shows the detail reading for a specify sensor
17
18 [[image:Level1.png||height="133" width="298"]] [[image:Arrow.png||height="27" width="51"]] [[image:Level2.png||height="134" width="264"]][[image:Arrow.png||height="27" width="51"]] [[image:2024-09-26 23-47-06.png||height="130" width="256"]]
19
20
21 The rest of this chapter will provide the introduction for how to set up similiar solution.
22
23
24 = 2.Basic configuration instructions =
25
26 When you start a complex IoT project, you first need to learn some basic configuration methods for ThingsEye.
27
28 Here are some instructions you need to know：
29
30 Dashboard creation and some basic configurations:[[https:~~/~~/wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20import%20and%20use%20the%20dashboard%3F/#H3.2.2.1CreatA0alarm>>https://wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20import%20and%20use%20the%20dashboard%3F/#H3.2.2.1CreatA0alarm]]
31
32 Rule chain creation:[[https:~~/~~/wiki.thingseye.io/xwiki/bin/view/Main/Basic%20configuration%20of%20rule%20chains>>https://wiki.thingseye.io/xwiki/bin/view/Main/Basic%20configuration%20of%20rule%20chains/]]
33
34 Devices connected to thingseye：[[https:~~/~~/wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20connect%20my%20devices%20to%20ThingsEye%3F/>>https://wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20connect%20my%20devices%20to%20ThingsEye%3F/]]
35
36 = 3.overview =
37
38 == 3.1 MHierarchical architectureore features ==
39
40 Before we start a project, we first need to understand the organizational structure of the project. Only with a clear outline can our project construction process be smoother
41
42 **Assets：**Dragino Office  、Dragino Factory
43
44 **Devices：**
45
46 Dragino Factory：temperature and humidity measurement×7、Gateway×1
47
48 Dragino Office：temperature and humidity measurement×2、Air quality measurement×4
49
50 == 3.2 Dashboard architecture ==
51
52 In this demo, the dashboard is divided into three layers, namely: home page, asset, and device.
53
54 **home page:**It includes three parts: map, asset list, and all alarm. From this interface, you can see how many factories, offices, and so on there are
55
56 **asset:**It includes three parts: asset map, device list, and asset alarm. From this interface, you can see how many sensors are deployed in the office or project, where they are located, and their alarm status
57
58 **device:**This section displays the specific information collected by the device, and different types of sensors have different display interfaces
59
60 [[image:屏幕截图 2024-11-04 134645.png]]
61
62 First floor：
63
64 [[image:1730702565889-204.png||height="771" width="1445"]]
65
66 Second floor：
67
68 [[image:1730702622551-808.png||height="756" width="1450"]]
69
70 Third floor：
71
72 [[image:1730702656725-496.png||height="775" width="1455"]]
73
74 [[image:1730702814435-805.png||height="797" width="1458"]]
75
76
77 [[image:1730702688377-367.png||height="770" width="1462"]]
78
79 * How many types of devices do you need, how many layers of third level dashboards you need to create.
80
81 == 3.3 Alarm rules ==
82
83 High Temperature、Low Temperature、High humidity、Low humidity、Low voltage、Device Disconnected
84
85 [[image:屏幕截图 2024-11-04 135045.png]]
86
87 = 4.configuration details =
88
89 After understanding the architecture and layering of the complete project, we can start configuring it
90
91 == 4.1 Dashboard configuration details ==
92
93 === 4.1.1.Data source (Entity aliases) ===
94
95 detail:Obtain data based on dashboard status
96
97 [[image:1730709424998-915.png||height="729" width="1436"]]
98
99 Alarm:Obtain alarm information
100
101 [[image:1730709479828-595.png||height="696" width="1435"]]
102
103 Dragino&GXHL,Ltd:Obtain data through asset types
104
105 [[image:1730709511861-439.png||height="714" width="1435"]]
106
107 Selected Supermarket:Retrieve devices by device type
108
109 [[image:1730709527720-418.png||height="751" width="1433"]]
110
111 Supermarket Devices:Obtain data through device type
112
113 [[image:1730709555797-383.png||height="726" width="1434"]]
114
115 LHT65N Device：Obtain data based on device type
116
117 [[image:1730857191863-514.png||height="725" width="1433"]]
118
119 === 4.1.2.Page Configuration ===
120
121 ==== 4.1.2.1、Configure the interface of the third layer Davies. ====
122
123 ==== 4.1.2.2、Configure the interface of the second layer asset ====
124
125 ===== 4.1.2.2.1 Equipment distribution diagram： =====
126
127 **Data：**
128
129 [[image:1730770392454-317.png||height="745" width="1439"]]
130
131 **Appearannce：**In this module, we need to arrange our devices in the corresponding positions and use icons to display our devices. Therefore, in the Appearance interface, we need to configure them
132
133 **Tooltip function：**This module displays the current information of the device
134
135 [[image:1730857537965-184.png]]
136
137 {{code language="none"}}
138 var msg = data
139 if(msg.Label=="gateway" && msg.type == "gateway"){
140 var stauts
141 if (msg.gatewaystauts=="true"){
142 stauts = "Connect"
143 }
144 else{
145 stauts = "Disconnected"
146 }
147 var str = "<b>"+msg.entityName+"</b><br/><b>"+stauts+"</b><br/>"
148 return str
149 }
150 else if(msg.type=="gxhl01" && msg.Label!="gateway"){
151 var str = "<b>"+msg.entityName+"</b><br/><b>"+msg.Label+"</b><br/><b>Bat:</b>"+msg.BatV+"V<br/><b>Temperature:</b>"+ msg.TempC_SHT+ "°C<br/><b>Humidity:</b>"+msg.Hum_SHT+"%"
152 return str
153 }
154 else{
155 var str = "<b>"+msg.entityName+"</b><br/><b>"+msg.Label+"</b><br/><b>Bat:</b>"+msg.BatV+"V<br/><b>Temperature:</b>"+ msg.temperature+ "°C<br/><b>Humidity:"+msg.humidity+"%"+"</b><br/>"+
156 "<b>Co2:"+msg.co2+"</b></br><b>Air_Pressure:"+msg.air_pressure
157
158 return str
159 }
160 {{/code}}
161
162 (% class="wikigeneratedid" id="HMarkerimagefunctionFF1A" %)
163 **Marker image function：**This module can display different icons based on different types of sensors and their status to achieve its functionality
164
165 (% class="wikigeneratedid" %)
166 [[image:1730857750749-240.png]]
167
168 {{code language="none"}}
169 var res
170 var msg = data
171 if(msg.Label=="gateway" && msg.type=="gateway"){
172 if (msg.gatewaystauts == "true"){
173 res = {
174 url: images[3],
175 size: 40
176 }
177 }
178 else{
179 res = {
180 url: images[2],
181 size: 40
182 }
183 }}
184 else if(msg.Label!="gateway" && msg.type=="gxhl01" ){
185 if (msg.active=="false"){
186 res = {
187 url: images[1],
188 size: 40
189 }}
190 else{
191 res = {
192 url: images[0],
193 size: 40
194 }
195 }
196 }
197 else if(msg.type=="LWL02"){
198 if (msg.WATER_LEAK_STATUS=="0"){
199 res = {
200 url: images[6],
201 size: 40
202 }}
203 else{
204 res = {
205 url: images[7],
206 size: 40
207 }
208 }
209 }
210 else if(msg.type=="LDS02"){
211 if (msg.DOOR_OPEN_STATUS=="0"){
212 res = {
213 url: images[5],
214 size: 40
215 }}
216 else{
217 res = {
218 url: images[8],
219 size: 40
220 }
221 }
222 }
223 else if(msg.type=="LDS12"){
224 res = {
225 url: images[10],
226 size: 40
227 }}
228 else if(msg.type=="SE01"){
229 res = {
230 url: images[9],
231 size: 40
232 }}
233 else if(msg.type=="PB01"){
234 res = {
235 url: images[11],
236 size: 40
237 }}
238 else if(msg.type=="S31b"){
239 res = {
240 url: images[12],
241 size: 40
242 }}
243 else if(msg.type=="LHT65N"){
244 res = {
245 url: images[13],
246 size: 40
247 }}
248 else{
249 res = {
250 url: images[4],
251 size: 40
252 }
253 }
254 return res;
255 {{/code}}
256
257 (% class="wikigeneratedid" %)
258 [[image:1730770875793-351.png]]
259
260 (% class="wikigeneratedid" %)
261 **Actions:**We need to implement the function of entering the details interface through the corresponding device icon, so in this module, we need to add actions to achieve redirection
262
263 {{code language="none"}}
264 var entitySubType;
265 var $injector = widgetContext.$scope.$injector;
266 $injector.get(widgetContext.servicesMap.get('entityService')).getEntity(entityId.entityType, entityId.id)
267 .subscribe(function(data) {
268 entitySubType = data.type;
269 console.log(entitySubType)
270 if (entitySubType == 'gateway') {
271 openDashboardStates('gateway_detail');
272 } else if (entitySubType == 'gxhl01') {
273 openDashboardStates('detail');
274 }
275 else if(entitySubType == 'AQS01-dragino-office'){
276 openDashboardStates("aqs01_detail")
277 }
278 else if (entitySubType == 'LDS12') {
279 openDashboardStates('lds12_detail');
280 }
281 else if (entitySubType == 'LDS02') {
282 openDashboardStates('lds02_detail');
283 }
284 else if (entitySubType == 'SE01') {
285 openDashboardStates('se01_detail');
286 }
287 else if (entitySubType == 'PB01') {
288 openDashboardStates('pb01_detail');
289 }
290 else if (entitySubType == 'LWL02') {
291 openDashboardStates('lwl02_detail');
292 }
293 else if (entitySubType == 'LPS8N') {
294 openDashboardStates('lps8n_detail');
295 }
296 else if (entitySubType == 'LHT65N') {
297 openDashboardStates('lht65n_detail');
298 }
299 else if (entitySubType == 'S31b') {
300 openDashboardStates('s31b_detail');
301 }
302 });
303
304 function openDashboardStates(statedId) {
305 var stateParams = widgetContext.stateController.getStateParams();
306 var params = {
307 entityId: entityId,
308 entityName: entityName
309 };
310
311 if (stateParams.city) {
312 params.city = stateParams.city;
313 }
314
315 widgetContext.stateController.openState(statedId, params, false);
316 }
317
318 {{/code}}
319
320 [[image:1730771103096-522.png]]
321
322 ===== 4.1.2.2.2 Device List =====
323
324 (% class="wikigeneratedid" id="HDataFF1A" %)
325 **Data：**
326
327 [[image:1730771199343-553.png]]
328
329 **Actions：**Equipment distribution diagram: In this module, functions need to be implemented such as adding devices, editing devices, deleting devices, and jumping to the device details page. Therefore, the following actions need to be added:
330
331 [[image:1730771228766-212.png]]
332
333 (% class="wikigeneratedid" id="HEditdeviceFF1A" %)
334 **Edit device：**Implementation function: Device editing
335
336 [[image:1730771256045-238.png]]
337
338 {{code language="none"}}
339 let $injector = widgetContext.$scope.$injector;
340 let customDialog = $injector.get(widgetContext.servicesMap.get('customDialog'));
341 let deviceService = $injector.get(widgetContext.servicesMap.get('deviceService'));
342 let attributeService = $injector.get(widgetContext.servicesMap.get('attributeService'));
343
344 openEditDeviceDialog();
345
346 function openEditDeviceDialog() {
347 customDialog.customDialog(htmlTemplate, EditDeviceDialogController).subscribe();
348 }
349
350 function EditDeviceDialogController(instance) {
351 let vm = instance;
352
353 vm.device = null;
354 vm.attributes = {};
355
356 vm.editDeviceFormGroup = vm.fb.group({
357 deviceName: ['', [vm.validators.required]],
358 deviceType: ['', [vm.validators.required]],
359 deviceLabel: [''],
360 attributes: vm.fb.group({
361 latitude: [null],
362 longitude: [null]
363 })
364 });
365
366 vm.cancel = function() {
367 vm.dialogRef.close(null);
368 };
369
370 vm.save = function() {
371 vm.editDeviceFormGroup.markAsPristine();
372 if (vm.editDeviceFormGroup.get('deviceType').value !== vm.device.type) {
373 delete vm.device.deviceProfileId;
374 }
375 vm.device.name = vm.editDeviceFormGroup.get('deviceName').value,
376 vm.device.type = vm.editDeviceFormGroup.get('deviceType').value,
377 vm.device.label = vm.editDeviceFormGroup.get('deviceLabel').value
378 deviceService.saveDevice(vm.device).subscribe(
379 function () {
380 saveAttributes().subscribe(
381 function () {
382 widgetContext.updateAliases();
383 vm.dialogRef.close(null);
384 }
385 );
386 }
387 );
388 };
389
390 getEntityInfo();
391
392 function getEntityInfo() {
393 deviceService.getDevice(entityId.id).subscribe(
394 function (device) {
395 attributeService.getEntityAttributes(entityId, 'SERVER_SCOPE',
396 ['latitude', 'longitude']).subscribe(
397 function (attributes) {
398 for (let i = 0; i < attributes.length; i++) {
399 vm.attributes[attributes[i].key] = attributes[i].value;
400 }
401 vm.device = device;
402 vm.editDeviceFormGroup.patchValue(
403 {
404 deviceName: vm.device.name,
405 deviceType: vm.device.type,
406 deviceLabel: vm.device.label,
407 attributes: {
408 latitude: vm.attributes.latitude,
409 longitude: vm.attributes.longitude
410 }
411 }, {emitEvent: false}
412 );
413 }
414 );
415 }
416 );
417 }
418
419 function saveAttributes() {
420 let attributes = vm.editDeviceFormGroup.get('attributes').value;
421 let attributesArray = [];
422 for (let key in attributes) {
423 attributesArray.push({key: key, value: attributes[key]});
424 }
425 if (attributesArray.length > 0) {
426 return attributeService.saveEntityAttributes(entityId, 'SERVER_SCOPE', attributesArray);
427 } else {
428 return widgetContext.rxjs.of([]);
429 }
430 }
431 }
432 {{/code}}
433
434 **Delete device：**Implementation function: Device deletion
435
436 [[image:1730771318657-502.png]]
437
438 {{code language="none"}}
439 let $injector = widgetContext.$scope.$injector;
440 let dialogs = $injector.get(widgetContext.servicesMap.get('dialogs'));
441 let deviceService = $injector.get(widgetContext.servicesMap.get('deviceService'));
442
443 openDeleteDeviceDialog();
444
445 function openDeleteDeviceDialog() {
446 let title = "Are you sure you want to delete the device " + entityName + "?";
447 let content = "Be careful, after the confirmation, the device and all related data will become unrecoverable!";
448 dialogs.confirm(title, content, 'Cancel', 'Delete').subscribe(
449 function (result) {
450 if (result) {
451 deleteDevice();
452 }
453 }
454 );
455 }
456
457 function deleteDevice() {
458 deviceService.deleteDevice(entityId.id).subscribe(
459 function () {
460 widgetContext.updateAliases();
461 }
462 );
463 }
464
465 {{/code}}
466
467 **jump:I**mplementation function: Jump to the device details page
468
469 [[image:1730771386258-676.png]]
470
471 {{code language="none"}}
472 console.log(entityName)
473 var entitySubType;
474 var $injector = widgetContext.$scope.$injector;
475 //console.log($injector)
476 $injector.get(widgetContext.servicesMap.get('entityService')).getEntity(entityId.entityType, entityId.id)
477 .subscribe(function(data) {
478 console.log(data)
479 entitySubType = data.type;
480 console.log(entitySubType)
481 if (entitySubType == 'AQS01-dragino-office') {
482 openDashboardStates('aqs01_detail');
483 }else if (entitySubType == 'gateway') {
484 openDashboardStates('gateway_detail');
485 } else if (entitySubType == 'gxhl01') {
486 openDashboardStates('detail');
487
488 } else if (entitySubType == 'tank-type1') {
489 openDashboardStates('test1');
490 }
491 else if (entitySubType == 'LDS12') {
492 openDashboardStates('lds12_detail');
493 }
494 else if (entitySubType == 'LDS02') {
495 openDashboardStates('lds02_detail');
496 }
497 else if (entitySubType == 'SE01') {
498 openDashboardStates('se01_detail');
499 }
500 else if (entitySubType == 'PB01') {
501 openDashboardStates('pb01_detail');
502 }
503 else if (entitySubType == 'LWL02') {
504 openDashboardStates('lwl02_detail');
505 }
506 else if (entitySubType == 'LPS8N') {
507 openDashboardStates('lps8n_detail');
508 }
509 else if (entitySubType == 'LHT65N') {
510 openDashboardStates('lht65n_detail');
511 }
512 else if (entitySubType == 'S31b') {
513 openDashboardStates('s31b_detail');
514 }
515 });
516
517 function openDashboardStates(statedId) {
518 var stateParams = widgetContext.stateController.getStateParams();
519 //console.log(stateParams)
520 var params = {
521 entityId: entityId,
522 entityName: entityName
523 };
524 widgetContext.stateController.updateState(statedId, params, false);
525 }
526 {{/code}}
527
528 (% class="wikigeneratedid" id="H-1" %)
529 **Add device：**Implementation function: Add device
530
531 [[image:1730771441589-122.png]]
532
533 {{code language="none"}}
534 let $injector = widgetContext.$scope.$injector;
535 let customDialog = $injector.get(widgetContext.servicesMap.get('customDialog'));
536 let deviceService = $injector.get(widgetContext.servicesMap.get('deviceService'));
537 let attributeService = $injector.get(widgetContext.servicesMap.get('attributeService'));
538
539 openAddDeviceDialog();
540
541 function openAddDeviceDialog() {
542 customDialog.customDialog(htmlTemplate, AddDeviceDialogController).subscribe();
543 }
544
545 function AddDeviceDialogController(instance) {
546 let vm = instance;
547
548 vm.addDeviceFormGroup = vm.fb.group({
549 deviceName: ['', [vm.validators.required]],
550 deviceType: ['', [vm.validators.required]],
551 deviceLabel: [''],
552 attributes: vm.fb.group({
553 latitude: [null],
554 longitude: [null]
555 })
556 });
557
558 vm.cancel = function() {
559 vm.dialogRef.close(null);
560 };
561
562 vm.save = function() {
563 vm.addDeviceFormGroup.markAsPristine();
564 let device = {
565 name: vm.addDeviceFormGroup.get('deviceName').value,
566 type: vm.addDeviceFormGroup.get('deviceType').value,
567 label: vm.addDeviceFormGroup.get('deviceLabel').value
568 };
569 deviceService.saveDevice(device).subscribe(
570 function (device) {
571 saveAttributes(device.id).subscribe(
572 function () {
573 widgetContext.updateAliases();
574 vm.dialogRef.close(null);
575 }
576 );
577 }
578 );
579 };
580
581 function saveAttributes(entityId) {
582 let attributes = vm.addDeviceFormGroup.get('attributes').value;
583 let attributesArray = [];
584 for (let key in attributes) {
585 attributesArray.push({key: key, value: attributes[key]});
586 }
587 if (attributesArray.length > 0) {
588 return attributeService.saveEntityAttributes(entityId, "SERVER_SCOPE", attributesArray);
589 } else {
590 return widgetContext.rxjs.of([]);
591 }
592 }
593 }
594 {{/code}}
595
596 ==== ====
597
598 ===== **4.1.2.2.3 Asset Alarm：** =====
599
600 **Data：**
601
602 [[image:1730771504586-433.png]]
603
604 ==== 4.1.2.3、Configure the first layer menu interface ====
605
606 ===== =====
607
608 [[image:1730710271230-716.png||height="729" width="1427"]]
609
610 **Actions**:The map interface has two actions, among which Select supermarket can refresh the device list and related alarms on the right side to enter the location, and Supermarket_detail can jump to the second level physical interface to view the details of the location based on the selected location
611
612 [[image:1730710850458-781.png||height="770" width="1429"]]
613
614 **Select supermarket:**Implementation function: Refresh the side page
615
616 {{code language="none"}}
617 var params = widgetContext.stateController.getStateParams();
618 var selectedSupermarket = params['selectedSupermarket'];
619 if (selectedSupermarket && selectedSupermarket.entityId.id === entityId.id) {
620 params['selectedSupermarket'] = null;
621 } else {
622 params['selectedSupermarket'] = { entityId: entityId, entityName: entityName, entityLabel: entityLabel };
623 }
624 widgetContext.stateController.updateState(null, params);
625 {{/code}}
626
627 [[image:1730710875401-848.png||height="767" width="1429"]]
628
629 **Supermarket_detail:**Implementation function: Jump to the asset details page
630
631 {{code language="none"}}
632 var params = JSON.parse(JSON.stringify(widgetContext.stateController.getStateParams()));
633 params['selectedSupermarket'] = {
634 entityId: entityId,
635 entityName: entityName,
636 entityLabel: entityLabel,
637 };
638 params['targetEntityParamName'] = 'selectedSupermarket';
639 params['selectedDevice'] = null;
640
641 widgetContext.stateController.openState('svgmap', params);
642 {{/code}}
643
644 [[image:1730710990334-601.png||height="772" width="1433"]]
645
646 * (((
647 In this demo, exclusive map icons were set as follows:
648 )))
649
650 {{code language="none"}}
651 var res = {
652 url: images[0],
653 size: 66
654 };
655 return res;
656 {{/code}}
657
658 [[image:1730710395303-672.png||height="771" width="1438"]]
659
660 ===== 4.1.2.3.1 Asset List: =====
661
662 **Data:**
663
664 [[image:1730710693066-349.png||height="772" width="1439"]]
665
666 **Actions:**The Assets List interface has an action, which is the same as the Supermarket_details in the Map. You can jump to the second level entity interface to view the details of the selected location based on its location
667
668 [[image:1730712335338-750.png||height="751" width="1423"]]
669
670 [[image:1730712473941-913.png||height="781" width="1422"]]
671
672 All Alarms:
673
674 [[image:1730712539209-554.png||height="764" width="1424"]]
675
676 == 4.2 Alarm configuration details ==
677
678 === 4.2.1 High temperature ===
679
680 Creat:
681
682 [[image:1730862483514-101.png||height="750" width="1407"]]
683
684 Clear:
685
686 [[image:1730862584519-902.png||height="758" width="1404"]]
687
688 === 4.2.2 Low Temperature ===
689
690 Creat:
691
692 [[image:1730863708259-750.png||height="752" width="1403"]]
693
694 Clear:
695
696 [[image:1730863750414-979.png||height="746" width="1403"]]
697
698 === 4.2.3 High humidity ===
699
700 Creat:
701
702 [[image:1730864045747-876.png||height="752" width="1396"]]
703
704 Clear:
705
706 [[image:1730864077395-395.png||height="735" width="1393"]]
707
708 === 4.2.4 Low humidity ===
709
710 Creat：
711
712 [[image:1730864117808-484.png||height="741" width="1392"]]
713
714 Clear：
715
716 [[image:1730864159071-895.png||height="745" width="1392"]]
717
718 === 4.2.5 Low voltage ===
719
720 Creat：
721
722 [[image:1730864207037-477.png||height="740" width="1388"]]
723
724 Clear：
725
726 [[image:1730864250506-111.png||height="735" width="1389"]]
727
728 === 4.2.6 Device Disconnected ===
729
730 Creat：
731
732 [[image:1730864293216-991.png||height="739" width="1387"]]
733
734 Clear：
735
736 [[image:1730864331859-740.png||height="735" width="1385"]]
737
738 == 4.3 Rule chain configuration details ==
739
740 [[image:1730864784118-474.png]]
741
742 **Script：**Email configuration for sending device alarm information
743
744 [[image:1730864676542-406.png||height="732" width="1384"]]
745
746 {{code language="none"}}
747 function locatime(timenumber){
748 var date = new Date(timenumber)
749 return date.toLocaleDateString() + ' ' + date.toLocaleTimeString()
750 }
751 var name = msg.name
752 var devicename = msg.originatorName
753 var label = msg.originatorLabel
754 var status = msg.status
755 var detaildata =JSON.parse(msg.details.data)
756 var tempswitch
757
758 if (name != "Device Disconnected") {
759 //detaildata=JSON.parse(msg.details.data)
760 if (detaildata.Temperature_alarm_switch == true) {
761 tempswitch = "open"
762 } else {
763 tempswitch = "close"
764 }
765 var humswitch
766 if (detaildata.Humidity_alarm_switch == true) {
767 humswitch = "open"
768 } else {
769 humswitch = "close"
770 }
771 var batswitch
772 if (detaildata.Voltage_alarm_switch == true) {
773 batswitch = "open"
774 } else {
775 batswitch = "close"
776 }
777 var str2 = "<p>-- Temperature alarm switch status: " +
778 tempswitch + "</p>" +
779 "<p>-- Humidity alarm switch status: " + humswitch +
780 "</p>" +
781 "<p>-- Voltage alarm switch status: " + batswitch
782 }
783
784 if (name == "High Temperature" && status ==
785 "ACTIVE_UNACK") {
786 var emailstr =
787 "<div><p><span style='color: black; font-weight: bold'>" +
788 "Device " + label + " has alarm:</span></p>" +
789 "<p><span style='color: red; font-weight: bold'>-- High Temperature Alarm</span></p>" +
790 "<p>-- Current Temperature : " + detaildata
791 .TempC_SHT + "</p><br>" +
792 "<p>Device Configure:</p>" +
793 "<p>-- Temperature Threshold : min: " + detaildata
794 .Low_temperature_alarm + ", max: " + detaildata
795 .High_temperature_alarm + "</p>" +
796 "<p>-- Humidity Threshold: min: " + detaildata
797 .Low_humidity_alarm + ", max:" + detaildata
798 .High_humidity_alarm + "</p>" +
799 "<p>-- Battery threshold: min: " + detaildata
800 .Low_voltage_alarm + "</p>" + str2 + "</div>"
801 return {
802 msg: {
803 "data": emailstr
804 },
805 metadata: metadata,
806 msgType: msgType
807 };
808 } else if (name == "Low Temperature" && status ==
809 "ACTIVE_UNACK") {
810 var emailstr =
811 "<div><p><span style='color: black; font-weight: bold'>" +
812 "Device " + label + " has alarm:</span></p>" +
813 "<p><span style='color: red; font-weight: bold'>-- Low Temperature Alarm</span></p>" +
814 "<p>-- Current Temperature : " + detaildata
815 .TempC_SHT + "</p><br>" +
816 "<p>Device Configure:</p>" +
817 "<p>-- Temperature Threshold : min: " + detaildata
818 .Low_temperature_alarm + ", max: " + detaildata
819 .High_temperature_alarm + "</p>" +
820 "<p>-- Humidity Threshold: min: " + detaildata
821 .Low_humidity_alarm + ", max:" + detaildata
822 .High_humidity_alarm + "</p>" +
823 "<p>-- Battery threshold: min: " + detaildata
824 .Low_voltage_alarm + "</p>" + str2 + "</div>"
825
826 return {
827 msg: {
828 "data": emailstr
829 },
830 metadata: metadata,
831 msgType: msgType
832 };
833
834 } else if (name == "Device Disconnected" && status ==
835 "ACTIVE_UNACK") {
836 var time1 = locatime(Number(detaildata.lastActivityTime))
837 //var time1 = detaildata.lastActivityTime
838 // var chazhi = parseInt((detaildata.inactivityAlarmTime-detaildata.lastActivityTime)/1000/60)
839 // var emailstr =
840 // "<div><p><span style='color: red; font-weight: bold'>" +
841 // "Device " + label + " has Alarm</span></p><p>Last activity time: "+time1+"</p><p>Last Uplink: 21"+"minutes ago</p></div>"
842
843 var emailstr ="Device " + label + " has Alarm##Last activity time: "+time1+"##Last Uplink: 21minutes ago"
844 var newType = "POST_TELEMETRY_REQUEST"
845 return {
846 msg:emailstr,
847 metadata: metadata,
848 msgType: newType
849 }
850 } else if (name == "High humidity" && status ==
851 "ACTIVE_UNACK") {
852 var emailstr =
853 "<div><p><span style='color: black; font-weight: bold'>" +
854 "Device " + label + " has alarm:</span></p>" +
855 "<p><span style='color: red; font-weight: bold'>-- High Humidity Alarm</span></p>" +
856 "<p>-- Current Temperature : " + detaildata
857 .Hum_SHT + "</p><br>" +
858 "<p>Device Configure:</p>" +
859 "<p>-- Temperature Threshold : min: " + detaildata
860 .Low_temperature_alarm + ", max: " + detaildata
861 .High_temperature_alarm + "</p>" +
862 "<p>-- Humidity Threshold: min: " + detaildata
863 .Low_humidity_alarm + ", max:" + detaildata
864 .High_humidity_alarm + "</p>" +
865 "<p>-- Battery threshold: min: " + detaildata
866 .Low_voltage_alarm + "</p>" + str2 + "</div>"
867
868 return {
869 msg: {
870 "data": emailstr
871 },
872 metadata: metadata,
873 msgType: msgType
874 };
875 } else if (name == "Low humidity" && status ==
876 "ACTIVE_UNACK") {
877 var emailstr =
878 "<div><p><span style='color: black; font-weight: bold'>" +
879 "Device " + label + " has alarm:</span></p>" +
880 "<p><span style='color: red; font-weight: bold'>-- Low Humidity Alarm</span></p>" +
881 "<p>-- Current Temperature : " + detaildata
882 .Hum_SHT + "</p><br>" +
883 "<p>Device Configure:</p>" +
884 "<p>-- Temperature Threshold : min: " + detaildata
885 .Low_temperature_alarm + ", max: " + detaildata
886 .High_temperature_alarm + "</p>" +
887 "<p>-- Humidity Threshold: min: " + detaildata
888 .Low_humidity_alarm + ", max:" + detaildata
889 .High_humidity_alarm + "</p>" +
890 "<p>-- Battery threshold: min: " + detaildata
891 .Low_voltage_alarm + "</p>" + str2 + "</div>"
892
893 return {
894 msg: {
895 "data": emailstr
896 },
897 metadata: metadata,
898 msgType: msgType
899 };
900 } else if (name == "Low voltage" && status ==
901 "ACTIVE_UNACK") {
902 var emailstr =
903 "<div><p><span style='color: black; font-weight: bold'>" +
904 "Device " + label + " has alarm:</span></p>" +
905 "<p><span style='color: red; font-weight: bold'>-- Low Voltage Alarm</span></p>" +
906 "<p>-- Current Temperature : " + detaildata.BatV +
907 "</p><br>" +
908 "<p>Device Configure:</p>" +
909 "<p>-- Temperature Threshold : min: " + detaildata
910 .Low_temperature_alarm + ", max: " + detaildata
911 .High_temperature_alarm + "</p>" +
912 "<p>-- Humidity Threshold: min: " + detaildata
913 .Low_humidity_alarm + ", max:" + detaildata
914 .High_humidity_alarm + "</p>" +
915 "<p>-- Battery threshold: min: " + detaildata
916 .Low_voltage_alarm + "</p>" + str2 + "</div>"
917
918 return {
919 msg: {
920 "data": emailstr
921 },
922 metadata: metadata,
923 msgType: msgType
924 };
925 } else if (name == "High Temperature" && status ==
926 "CLEARED_UNACK") {
927 var emailstr =
928 "<div><p><span style='color: green; font-weight: bold'>Device " +
929 label +
930 " High Temperature Alarm Cleared</span></p>" +
931 "<p>-- Current Temperature : " + detaildata
932 .TempC_SHT + "</p><br>" +
933 "<p>Device Configure:</p>" +
934 "<p>-- Temperature Threshold : min: " + detaildata
935 .Low_temperature_alarm + ", max: " + detaildata
936 .High_temperature_alarm + "</p>" +
937 "<p>-- Humidity Threshold: min: " + detaildata
938 .Low_humidity_alarm + ", max:" + detaildata
939 .High_humidity_alarm + "</p>" +
940 "<p>-- Battery threshold: min: " + detaildata
941 .Low_voltage_alarm + "</p>" + str2 + "</div>"
942
943 return {
944 msg: {
945 "data": emailstr
946 },
947 metadata: metadata,
948 msgType: msgType
949 };
950 } else if (name == "Low Temperature" && status ==
951 "CLEARED_UNACK") {
952 var emailstr =
953 "<div><p><span style='color: green; font-weight: bold'>Device " +
954 label +
955 " Low Temperature Alarm Cleared</span></p>" +
956 "<p>-- Current Temperature : " + detaildata
957 .TempC_SHT + "</p><br>" +
958 "<p>Device Configure:</p>" +
959 "<p>-- Temperature Threshold : min: " + detaildata
960 .Low_temperature_alarm + ", max: " + detaildata
961 .High_temperature_alarm + "</p>" +
962 "<p>-- Humidity Threshold: min: " + detaildata
963 .Low_humidity_alarm + ", max:" + detaildata
964 .High_humidity_alarm + "</p>" +
965 "<p>-- Battery threshold: min: " + detaildata
966 .Low_voltage_alarm + "</p>" + str2 + "</div>"
967
968 return {
969 msg: {
970 "data": emailstr
971 },
972 metadata: metadata,
973 msgType: msgType
974 };
975 } else if (name == "High humidity" && status ==
976 "CLEARED_UNACK") {
977 var emailstr =
978 "<div><p><span style='color: green; font-weight: bold'>Device " +
979 label + " High Humidity Alarm Cleared</span></p>" +
980 "<p>-- Current Temperature : " + detaildata
981 .Hum_SHT + "</p><br>" +
982 "<p>Device Configure:</p>" +
983 "<p>-- Temperature Threshold : min: " + detaildata
984 .Low_temperature_alarm + ", max: " + detaildata
985 .High_temperature_alarm + "</p>" +
986 "<p>-- Humidity Threshold: min: " + detaildata
987 .Low_humidity_alarm + ", max:" + detaildata
988 .High_humidity_alarm + "</p>" +
989 "<p>-- Battery threshold: min: " + detaildata
990 .Low_voltage_alarm + "</p>" + str2 + "</div>"
991
992 return {
993 msg: {
994 "data": emailstr
995 },
996 metadata: metadata,
997 msgType: msgType
998 };
999 } else if (name == "Low humidity" && status ==
1000 "CLEARED_UNACK") {
1001 var emailstr =
1002 "<div><p><span style='color: green; font-weight: bold'>Device " +
1003 label + " Low Humidity Alarm Cleared</span></p>" +
1004 "<p>-- Current Temperature : " + detaildata
1005 .Hum_SHT + "</p><br>" +
1006 "<p>Device Configure:</p>" +
1007 "<p>-- Temperature Threshold : min: " + detaildata
1008 .Low_temperature_alarm + ", max: " + detaildata
1009 .High_temperature_alarm + "</p>" +
1010 "<p>-- Humidity Threshold: min: " + detaildata
1011 .Low_humidity_alarm + ", max:" + detaildata
1012 .High_humidity_alarm + "</p>" +
1013 "<p>-- Battery threshold: min: " + detaildata
1014 .Low_voltage_alarm + "</p>" + str2 + "</div>"
1015 return {
1016 msg: {
1017 "data": emailstr
1018 },
1019 metadata: metadata,
1020 msgType: msgType
1021 };
1022 } else if (name == "Low voltage" && status ==
1023 "CLEARED_UNACK") {
1024
1025 var emailstr =
1026 "<div><p><span style='color: green; font-weight: bold'>Device " +
1027 label + " Low Voltage Alarm Cleared</span></p>" +
1028 "<p>-- Current Temperature : " + detaildata.BatV +
1029 "</p><br><br>" +
1030 "<p>Device Configure:</p>" +
1031 "<p>-- Temperature Threshold : min: " + detaildata
1032 .Low_temperature_alarm + ", max: " + detaildata
1033 .High_temperature_alarm + "</p>" +
1034 "<p>-- Humidity Threshold: min: " + detaildata
1035 .Low_humidity_alarm + ", max:" + detaildata
1036 .High_humidity_alarm + "</p>" +
1037 "<p>-- Battery threshold: min: " + detaildata
1038 .Low_voltage_alarm + "</p>" + str2 + "</div>"
1039
1040 return {
1041 msg: {
1042 "data": emailstr
1043 },
1044 metadata: metadata,
1045 msgType: msgType
1046 };
1047 } else if (name == "Device Disconnected" && status ==
1048 "CLEARED_UNACK") {
1049 var time1 = locatime(Number(detaildata.lastActivityTime))
1050 //var time1 = detaildata.lastActivityTime
1051 // var chazhi = parseInt((detaildata.inactivityAlarmTime-detaildata.lastActivityTime)/1000/60)
1052 // var emailstr =
1053 // "<div><p><span style='color: green; font-weight: bold'>" +
1054 // "Device " + label + " has Alarm Cleared</span></p><p>Last activity time: "+time1+"</p></div>"
1055 var emailstr ="Device " + label + " has Alarm Cleared##Last activity time: "+time1
1056 var newType = "POST_TELEMETRY_REQUEST"
1057 return {
1058 msg: emailstr,
1059 metadata: metadata,
1060 msgType: newType
1061 }
1062 }
1063 {{/code}}
1064
1065 (% class="wikigeneratedid" %)
1066 **Generate Report：**
1067
1068 (% class="wikigeneratedid" %)
1069 [[image:1730865053380-293.png]]
1070
1071 = 5.other =
1072
1073 * If you want to create a similar dashboard, after understanding the case, you can download and import the dashboard, device profiles, rule chains, etc. of the case on GitHub, and make modifications based on them.
1074 * GitHub address：[[https:~~/~~/github.com/ThingsEye-io/te-platform/tree/main/case/Dragino%20Office%20%26%20Factory>>https://github.com/ThingsEye-io/te-platform/tree/main/case/Dragino%20Office%20%26%20Factory]]