Wiki source code of Demo for Smart Office, Factory

Version 46.1 by Hera Guo on 2024/11/07 09:52
Show last authors
1 **Table of Contents:**
2
3 {{toc/}}
4
5
6
7
8 = 1. About this demo =
9
10 This demo is to show the installation for various sensors in Dragino Office, Dragino Facotry & ThingsEye Office. It covers various types of sensors such as Temperature, Humidity, CO2, Water Flow, Vibration & many many.
11
12 User can check this [[Public Share Link>>https://thingseye.io/dashboard/d17f70f0-6b5f-11ef-a329-6fb88c149adb?publicId=33180810-5c40-11ef-a329-6fb88c149adb ]] and see the dash board for this demo. The dash board keeps updating, while the main structure will keep the same. It has **Three Level DashBoard **as decribe below.
13
14 * **First Level - Overview for all branches**: This dashboard shows all branches overview status and location.
15 * **Second Level - Branch Level**: This dashboard shows all sensors installation and status in the selected branch.
16 * **Third Level - Sensor Level**: This dashboard shows the detail reading for a specify sensor
17
18 [[image:Level1.png||height="133" width="298"]] [[image:Arrow.png||height="27" width="51"]] [[image:Level2.png||height="134" width="264"]][[image:Arrow.png||height="27" width="51"]] [[image:2024-09-26 23-47-06.png||height="130" width="256"]]
19
20
21 The rest of this chapter will provide the introduction for how to set up similiar solution.
22
23
24 = 2.Basic configuration instructions =
25
26 When you start a complex IoT project, you first need to learn some basic configuration methods for ThingsEye.
27
28 Here are some instructions you need to know：
29
30 Dashboard creation and some basic configurations:[[https:~~/~~/wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20import%20and%20use%20the%20dashboard%3F/#H3.2.2.1CreatA0alarm>>https://wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20import%20and%20use%20the%20dashboard%3F/#H3.2.2.1CreatA0alarm]]
31
32 Rule chain creation:[[https:~~/~~/wiki.thingseye.io/xwiki/bin/view/Main/Basic%20configuration%20of%20rule%20chains>>https://wiki.thingseye.io/xwiki/bin/view/Main/Basic%20configuration%20of%20rule%20chains/]]
33
34 Devices connected to thingseye：[[https:~~/~~/wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20connect%20my%20devices%20to%20ThingsEye%3F/>>https://wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20connect%20my%20devices%20to%20ThingsEye%3F/]]
35
36 = 3.overview =
37
38 == 3.1 MHierarchical architectureore features ==
39
40 Before we start a project, we first need to understand the organizational structure of the project. Only with a clear outline can our project construction process be smoother
41
42 **Assets：**Dragino Office  、Dragino Factory
43
44 **Devices：**
45
46 Dragino Factory：temperature and humidity measurement×7、Gateway×1
47
48 Dragino Office：temperature and humidity measurement×2、Air quality measurement×4
49
50 == 3.2 Dashboard architecture ==
51
52 In this demo, the dashboard is divided into three layers, namely: home page, asset, and device.
53
54 **home page:**It includes three parts: map, asset list, and all alarm. From this interface, you can see how many factories, offices, and so on there are
55
56 **asset:**It includes three parts: asset map, device list, and asset alarm. From this interface, you can see how many sensors are deployed in the office or project, where they are located, and their alarm status
57
58 **device:**This section displays the specific information collected by the device, and different types of sensors have different display interfaces
59
60 [[image:屏幕截图 2024-11-04 134645.png]]
61
62 First floor：
63
64 [[image:1730702565889-204.png||height="771" width="1445"]]
65
66 Second floor：
67
68 [[image:1730702622551-808.png||height="756" width="1450"]]
69
70 Third floor：
71
72 [[image:1730702656725-496.png||height="775" width="1455"]]
73
74 [[image:1730702814435-805.png||height="797" width="1458"]]
75
76
77 [[image:1730702688377-367.png||height="770" width="1462"]]
78
79 * How many types of devices do you need, how many layers of third level dashboards you need to create.
80
81 == 3.3 Alarm rules ==
82
83 High Temperature、Low Temperature、High humidity、Low humidity、Low voltage、Device Disconnected
84
85 [[image:屏幕截图 2024-11-04 135045.png]]
86
87 = 4.configuration details =
88
89 After understanding the architecture and layering of the complete project, we can start configuring it
90
91 == 4.1 Dashboard configuration details ==
92
93 === 4.1.1.Data source (Entity aliases) ===
94
95 detail:Obtain data based on dashboard status
96
97 [[image:1730709424998-915.png||height="729" width="1436"]]
98
99 Alarm:Obtain alarm information
100
101 [[image:1730709479828-595.png||height="696" width="1435"]]
102
103 Dragino&GXHL,Ltd:Obtain data through asset types
104
105 [[image:1730709511861-439.png||height="714" width="1435"]]
106
107 Selected Supermarket:Retrieve devices by device type
108
109 [[image:1730709527720-418.png||height="751" width="1433"]]
110
111 Supermarket Devices:Obtain data through device type
112
113 [[image:1730709555797-383.png||height="726" width="1434"]]
114
115 LHT65N Device：Obtain data based on device type
116
117 [[image:1730857191863-514.png||height="725" width="1433"]]
118
119 === 4.1.2.Page Configuration ===
120
121 ==== 4.1.2.1、Configure the interface of the third layer Davies. ====
122
123 ==== 4.1.2.2、Configure the interface of the second layer asset ====
124
125 ===== 4.1.2.2.1 Equipment distribution diagram： =====
126
127 **Data：**
128
129 [[image:1730770392454-317.png||height="745" width="1439"]]
130
131 **Appearannce：**In this module, we need to arrange our devices in the corresponding positions and use icons to display our devices. Therefore, in the Appearance interface, we need to configure them
132
133 **Tooltip function：**This module displays the current information of the device
134
135 [[image:1730857537965-184.png]]
136
137 {{code language="none"}}
138 var msg = data
139 if(msg.Label=="gateway" && msg.type == "gateway"){
140 var stauts
141 if (msg.gatewaystauts=="true"){
142 stauts = "Connect"
143 }
144 else{
145 stauts = "Disconnected"
146 }
147 var str = "<b>"+msg.entityName+"</b><br/><b>"+stauts+"</b><br/>"
148 return str
149 }
150 else if(msg.type=="gxhl01" && msg.Label!="gateway"){
151 var str = "<b>"+msg.entityName+"</b><br/><b>"+msg.Label+"</b><br/><b>Bat:</b>"+msg.BatV+"V<br/><b>Temperature:</b>"+ msg.TempC_SHT+ "°C<br/><b>Humidity:</b>"+msg.Hum_SHT+"%"
152 return str
153 }
154 else{
155 var str = "<b>"+msg.entityName+"</b><br/><b>"+msg.Label+"</b><br/><b>Bat:</b>"+msg.BatV+"V<br/><b>Temperature:</b>"+ msg.temperature+ "°C<br/><b>Humidity:"+msg.humidity+"%"+"</b><br/>"+
156 "<b>Co2:"+msg.co2+"</b></br><b>Air_Pressure:"+msg.air_pressure
157
158 return str
159 }
160 {{/code}}
161
162 (% class="wikigeneratedid" id="HMarkerimagefunctionFF1A" %)
163 **Marker image function：**This module can display different icons based on different types of sensors and their status to achieve its functionality
164
165 (% class="wikigeneratedid" %)
166 [[image:1730857750749-240.png]]
167
168 {{code language="none"}}
169 var res
170 var msg = data
171 if(msg.Label=="gateway" && msg.type=="gateway"){
172 if (msg.gatewaystauts == "true"){
173 res = {
174 url: images[3],
175 size: 40
176 }
177 }
178 else{
179 res = {
180 url: images[2],
181 size: 40
182 }
183 }}
184 else if(msg.Label!="gateway" && msg.type=="gxhl01" ){
185 if (msg.active=="false"){
186 res = {
187 url: images[1],
188 size: 40
189 }}
190 else{
191 res = {
192 url: images[0],
193 size: 40
194 }
195 }
196 }
197 else if(msg.type=="LWL02"){
198 if (msg.WATER_LEAK_STATUS=="0"){
199 res = {
200 url: images[6],
201 size: 40
202 }}
203 else{
204 res = {
205 url: images[7],
206 size: 40
207 }
208 }
209 }
210 else if(msg.type=="LDS02"){
211 if (msg.DOOR_OPEN_STATUS=="0"){
212 res = {
213 url: images[5],
214 size: 40
215 }}
216 else{
217 res = {
218 url: images[8],
219 size: 40
220 }
221 }
222 }
223 else if(msg.type=="LDS12"){
224 res = {
225 url: images[10],
226 size: 40
227 }}
228 else if(msg.type=="SE01"){
229 res = {
230 url: images[9],
231 size: 40
232 }}
233 else if(msg.type=="PB01"){
234 res = {
235 url: images[11],
236 size: 40
237 }}
238 else if(msg.type=="S31b"){
239 res = {
240 url: images[12],
241 size: 40
242 }}
243 else if(msg.type=="LHT65N"){
244 res = {
245 url: images[13],
246 size: 40
247 }}
248 else{
249 res = {
250 url: images[4],
251 size: 40
252 }
253 }
254 return res;
255 {{/code}}
256
257 (% class="wikigeneratedid" %)
258 [[image:1730770875793-351.png]]
259
260 (% class="wikigeneratedid" %)
261 **Actions:**We need to implement the function of entering the details interface through the corresponding device icon, so in this module, we need to add actions to achieve redirection
262
263 {{code language="none"}}
264 var entitySubType;
265 var $injector = widgetContext.$scope.$injector;
266 $injector.get(widgetContext.servicesMap.get('entityService')).getEntity(entityId.entityType, entityId.id)
267 .subscribe(function(data) {
268 entitySubType = data.type;
269 console.log(entitySubType)
270 if (entitySubType == 'gateway') {
271 openDashboardStates('gateway_detail');
272 } else if (entitySubType == 'gxhl01') {
273 openDashboardStates('detail');
274 }
275 else if(entitySubType == 'AQS01-dragino-office'){
276 openDashboardStates("aqs01_detail")
277 }
278 else if (entitySubType == 'LDS12') {
279 openDashboardStates('lds12_detail');
280 }
281 else if (entitySubType == 'LDS02') {
282 openDashboardStates('lds02_detail');
283 }
284 else if (entitySubType == 'SE01') {
285 openDashboardStates('se01_detail');
286 }
287 else if (entitySubType == 'PB01') {
288 openDashboardStates('pb01_detail');
289 }
290 else if (entitySubType == 'LWL02') {
291 openDashboardStates('lwl02_detail');
292 }
293 else if (entitySubType == 'LPS8N') {
294 openDashboardStates('lps8n_detail');
295 }
296 else if (entitySubType == 'LHT65N') {
297 openDashboardStates('lht65n_detail');
298 }
299 else if (entitySubType == 'S31b') {
300 openDashboardStates('s31b_detail');
301 }
302 });
303
304 function openDashboardStates(statedId) {
305 var stateParams = widgetContext.stateController.getStateParams();
306 var params = {
307 entityId: entityId,
308 entityName: entityName
309 };
310
311 if (stateParams.city) {
312 params.city = stateParams.city;
313 }
314
315 widgetContext.stateController.openState(statedId, params, false);
316 }
317
318 {{/code}}
319
320 [[image:1730771103096-522.png]]
321
322 ===== 4.1.2.2.2 Device List =====
323
324 (% class="wikigeneratedid" id="HDataFF1A" %)
325 **Data：**
326
327 [[image:1730771199343-553.png]]
328
329 **Actions：**Equipment distribution diagram: In this module, functions need to be implemented such as adding devices, editing devices, deleting devices, and jumping to the device details page. Therefore, the following actions need to be added:
330
331 [[image:1730771228766-212.png]]
332
333 (% class="wikigeneratedid" id="HEditdeviceFF1A" %)
334 **Edit device：**Implementation function: Device editing
335
336 [[image:1730771256045-238.png]]
337
338 {{code language="none"}}
339 let $injector = widgetContext.$scope.$injector;
340 let customDialog = $injector.get(widgetContext.servicesMap.get('customDialog'));
341 let deviceService = $injector.get(widgetContext.servicesMap.get('deviceService'));
342 let attributeService = $injector.get(widgetContext.servicesMap.get('attributeService'));
343
344 openEditDeviceDialog();
345
346 function openEditDeviceDialog() {
347 customDialog.customDialog(htmlTemplate, EditDeviceDialogController).subscribe();
348 }
349
350 function EditDeviceDialogController(instance) {
351 let vm = instance;
352
353 vm.device = null;
354 vm.attributes = {};
355
356 vm.editDeviceFormGroup = vm.fb.group({
357 deviceName: ['', [vm.validators.required]],
358 deviceType: ['', [vm.validators.required]],
359 deviceLabel: [''],
360 attributes: vm.fb.group({
361 latitude: [null],
362 longitude: [null]
363 })
364 });
365
366 vm.cancel = function() {
367 vm.dialogRef.close(null);
368 };
369
370 vm.save = function() {
371 vm.editDeviceFormGroup.markAsPristine();
372 if (vm.editDeviceFormGroup.get('deviceType').value !== vm.device.type) {
373 delete vm.device.deviceProfileId;
374 }
375 vm.device.name = vm.editDeviceFormGroup.get('deviceName').value,
376 vm.device.type = vm.editDeviceFormGroup.get('deviceType').value,
377 vm.device.label = vm.editDeviceFormGroup.get('deviceLabel').value
378 deviceService.saveDevice(vm.device).subscribe(
379 function () {
380 saveAttributes().subscribe(
381 function () {
382 widgetContext.updateAliases();
383 vm.dialogRef.close(null);
384 }
385 );
386 }
387 );
388 };
389
390 getEntityInfo();
391
392 function getEntityInfo() {
393 deviceService.getDevice(entityId.id).subscribe(
394 function (device) {
395 attributeService.getEntityAttributes(entityId, 'SERVER_SCOPE',
396 ['latitude', 'longitude']).subscribe(
397 function (attributes) {
398 for (let i = 0; i < attributes.length; i++) {
399 vm.attributes[attributes[i].key] = attributes[i].value;
400 }
401 vm.device = device;
402 vm.editDeviceFormGroup.patchValue(
403 {
404 deviceName: vm.device.name,
405 deviceType: vm.device.type,
406 deviceLabel: vm.device.label,
407 attributes: {
408 latitude: vm.attributes.latitude,
409 longitude: vm.attributes.longitude
410 }
411 }, {emitEvent: false}
412 );
413 }
414 );
415 }
416 );
417 }
418
419 function saveAttributes() {
420 let attributes = vm.editDeviceFormGroup.get('attributes').value;
421 let attributesArray = [];
422 for (let key in attributes) {
423 attributesArray.push({key: key, value: attributes[key]});
424 }
425 if (attributesArray.length > 0) {
426 return attributeService.saveEntityAttributes(entityId, 'SERVER_SCOPE', attributesArray);
427 } else {
428 return widgetContext.rxjs.of([]);
429 }
430 }
431 }
432 {{/code}}
433
434 **Delete device：**Implementation function: Device deletion
435
436 [[image:1730771318657-502.png]]
437
438 {{code language="none"}}
439 let $injector = widgetContext.$scope.$injector;
440 let dialogs = $injector.get(widgetContext.servicesMap.get('dialogs'));
441 let deviceService = $injector.get(widgetContext.servicesMap.get('deviceService'));
442
443 openDeleteDeviceDialog();
444
445 function openDeleteDeviceDialog() {
446 let title = "Are you sure you want to delete the device " + entityName + "?";
447 let content = "Be careful, after the confirmation, the device and all related data will become unrecoverable!";
448 dialogs.confirm(title, content, 'Cancel', 'Delete').subscribe(
449 function (result) {
450 if (result) {
451 deleteDevice();
452 }
453 }
454 );
455 }
456
457 function deleteDevice() {
458 deviceService.deleteDevice(entityId.id).subscribe(
459 function () {
460 widgetContext.updateAliases();
461 }
462 );
463 }
464
465 {{/code}}
466
467 **jump:I**mplementation function: Jump to the device details page
468
469 [[image:1730771386258-676.png]]
470
471 {{code language="none"}}
472 console.log(entityName)
473 var entitySubType;
474 var $injector = widgetContext.$scope.$injector;
475 //console.log($injector)
476 $injector.get(widgetContext.servicesMap.get('entityService')).getEntity(entityId.entityType, entityId.id)
477 .subscribe(function(data) {
478 console.log(data)
479 entitySubType = data.type;
480 console.log(entitySubType)
481 if (entitySubType == 'AQS01-dragino-office') {
482 openDashboardStates('aqs01_detail');
483 }else if (entitySubType == 'gateway') {
484 openDashboardStates('gateway_detail');
485 } else if (entitySubType == 'gxhl01') {
486 openDashboardStates('detail');
487
488 } else if (entitySubType == 'tank-type1') {
489 openDashboardStates('test1');
490 }
491 else if (entitySubType == 'LDS12') {
492 openDashboardStates('lds12_detail');
493 }
494 else if (entitySubType == 'LDS02') {
495 openDashboardStates('lds02_detail');
496 }
497 else if (entitySubType == 'SE01') {
498 openDashboardStates('se01_detail');
499 }
500 else if (entitySubType == 'PB01') {
501 openDashboardStates('pb01_detail');
502 }
503 else if (entitySubType == 'LWL02') {
504 openDashboardStates('lwl02_detail');
505 }
506 else if (entitySubType == 'LPS8N') {
507 openDashboardStates('lps8n_detail');
508 }
509 else if (entitySubType == 'LHT65N') {
510 openDashboardStates('lht65n_detail');
511 }
512 else if (entitySubType == 'S31b') {
513 openDashboardStates('s31b_detail');
514 }
515 });
516
517 function openDashboardStates(statedId) {
518 var stateParams = widgetContext.stateController.getStateParams();
519 //console.log(stateParams)
520 var params = {
521 entityId: entityId,
522 entityName: entityName
523 };
524 widgetContext.stateController.updateState(statedId, params, false);
525 }
526 {{/code}}
527
528 (% class="wikigeneratedid" id="H-1" %)
529 **Add device：**Implementation function: Add device
530
531 [[image:1730771441589-122.png]]
532
533 {{code language="none"}}
534 let $injector = widgetContext.$scope.$injector;
535 let customDialog = $injector.get(widgetContext.servicesMap.get('customDialog'));
536 let deviceService = $injector.get(widgetContext.servicesMap.get('deviceService'));
537 let attributeService = $injector.get(widgetContext.servicesMap.get('attributeService'));
538
539 openAddDeviceDialog();
540
541 function openAddDeviceDialog() {
542 customDialog.customDialog(htmlTemplate, AddDeviceDialogController).subscribe();
543 }
544
545 function AddDeviceDialogController(instance) {
546 let vm = instance;
547
548 vm.addDeviceFormGroup = vm.fb.group({
549 deviceName: ['', [vm.validators.required]],
550 deviceType: ['', [vm.validators.required]],
551 deviceLabel: [''],
552 attributes: vm.fb.group({
553 latitude: [null],
554 longitude: [null]
555 })
556 });
557
558 vm.cancel = function() {
559 vm.dialogRef.close(null);
560 };
561
562 vm.save = function() {
563 vm.addDeviceFormGroup.markAsPristine();
564 let device = {
565 name: vm.addDeviceFormGroup.get('deviceName').value,
566 type: vm.addDeviceFormGroup.get('deviceType').value,
567 label: vm.addDeviceFormGroup.get('deviceLabel').value
568 };
569 deviceService.saveDevice(device).subscribe(
570 function (device) {
571 saveAttributes(device.id).subscribe(
572 function () {
573 widgetContext.updateAliases();
574 vm.dialogRef.close(null);
575 }
576 );
577 }
578 );
579 };
580
581 function saveAttributes(entityId) {
582 let attributes = vm.addDeviceFormGroup.get('attributes').value;
583 let attributesArray = [];
584 for (let key in attributes) {
585 attributesArray.push({key: key, value: attributes[key]});
586 }
587 if (attributesArray.length > 0) {
588 return attributeService.saveEntityAttributes(entityId, "SERVER_SCOPE", attributesArray);
589 } else {
590 return widgetContext.rxjs.of([]);
591 }
592 }
593 }
594 {{/code}}
595
596 ==== ====
597
598 ===== 4.1.2.2.3 Asset Alarm: =====
599
600 **Data：**
601
602
603 ==== 4.1.2.3、Configure the first layer menu interface ====
604
605 ===== 4.1.2.3.1 **Map:** =====
606
607 **Data:**
608
609 ===== =====
610
611 [[image:1730710271230-716.png||height="729" width="1427"]]
612
613 **Actions**:The map interface has two actions, among which Select supermarket can refresh the device list and related alarms on the right side to enter the location, and Supermarket_detail can jump to the second level physical interface to view the details of the location based on the selected location
614
615 [[image:1730710850458-781.png||height="770" width="1429"]]
616
617 **Select supermarket:**Implementation function: Refresh the side page
618
619 {{code language="none"}}
620 var params = widgetContext.stateController.getStateParams();
621 var selectedSupermarket = params['selectedSupermarket'];
622 if (selectedSupermarket && selectedSupermarket.entityId.id === entityId.id) {
623 params['selectedSupermarket'] = null;
624 } else {
625 params['selectedSupermarket'] = { entityId: entityId, entityName: entityName, entityLabel: entityLabel };
626 }
627 widgetContext.stateController.updateState(null, params);
628 {{/code}}
629
630 [[image:1730710875401-848.png||height="767" width="1429"]]
631
632 **Supermarket_detail:**Implementation function: Jump to the asset details page
633
634 {{code language="none"}}
635 var params = JSON.parse(JSON.stringify(widgetContext.stateController.getStateParams()));
636 params['selectedSupermarket'] = {
637 entityId: entityId,
638 entityName: entityName,
639 entityLabel: entityLabel,
640 };
641 params['targetEntityParamName'] = 'selectedSupermarket';
642 params['selectedDevice'] = null;
643
644 widgetContext.stateController.openState('svgmap', params);
645 {{/code}}
646
647 [[image:1730710990334-601.png||height="772" width="1433"]]
648
649 * (((
650 In this demo, exclusive map icons were set as follows:
651 )))
652
653 {{code language="none"}}
654 var res = {
655 url: images[0],
656 size: 66
657 };
658 return res;
659 {{/code}}
660
661 [[image:1730710395303-672.png||height="771" width="1438"]]
662
663 ===== 4.1.2.3.1 Asset List: =====
664
665 **Data:**
666
667 [[image:1730710693066-349.png||height="772" width="1439"]]
668
669 **Actions:**The Assets List interface has an action, which is the same as the Supermarket_details in the Map. You can jump to the second level entity interface to view the details of the selected location based on its location
670
671 [[image:1730712335338-750.png||height="751" width="1423"]]
672
673 [[image:1730712473941-913.png||height="781" width="1422"]]
674
675 All Alarms:
676
677 [[image:1730712539209-554.png||height="764" width="1424"]]
678
679 == 4.2 Alarm configuration details ==
680
681 === 4.2.1 High temperature ===
682
683 Creat:
684
685 [[image:1730862483514-101.png||height="750" width="1407"]]
686
687 Clear:
688
689 [[image:1730862584519-902.png||height="758" width="1404"]]
690
691 === 4.2.2 Low Temperature ===
692
693 Creat:
694
695 [[image:1730863708259-750.png||height="752" width="1403"]]
696
697 Clear:
698
699 [[image:1730863750414-979.png||height="746" width="1403"]]
700
701 === 4.2.3 High humidity ===
702
703 Creat:
704
705 [[image:1730864045747-876.png||height="752" width="1396"]]
706
707 Clear:
708
709 [[image:1730864077395-395.png||height="735" width="1393"]]
710
711 === 4.2.4 Low humidity ===
712
713 Creat：
714
715 [[image:1730864117808-484.png||height="741" width="1392"]]
716
717 Clear：
718
719 [[image:1730864159071-895.png||height="745" width="1392"]]
720
721 === 4.2.5 Low voltage ===
722
723 Creat：
724
725 [[image:1730864207037-477.png||height="740" width="1388"]]
726
727 Clear：
728
729 [[image:1730864250506-111.png||height="735" width="1389"]]
730
731 === 4.2.6 Device Disconnected ===
732
733 Creat：
734
735 [[image:1730864293216-991.png||height="739" width="1387"]]
736
737 Clear：
738
739 [[image:1730864331859-740.png||height="735" width="1385"]]
740
741 == 4.3 Rule chain configuration details ==
742
743 [[image:1730864784118-474.png]]
744
745 **Script：**Email configuration for sending device alarm information
746
747 [[image:1730864676542-406.png||height="732" width="1384"]]
748
749 {{code language="none"}}
750 function locatime(timenumber){
751 var date = new Date(timenumber)
752 return date.toLocaleDateString() + ' ' + date.toLocaleTimeString()
753 }
754 var name = msg.name
755 var devicename = msg.originatorName
756 var label = msg.originatorLabel
757 var status = msg.status
758 var detaildata =JSON.parse(msg.details.data)
759 var tempswitch
760
761 if (name != "Device Disconnected") {
762 //detaildata=JSON.parse(msg.details.data)
763 if (detaildata.Temperature_alarm_switch == true) {
764 tempswitch = "open"
765 } else {
766 tempswitch = "close"
767 }
768 var humswitch
769 if (detaildata.Humidity_alarm_switch == true) {
770 humswitch = "open"
771 } else {
772 humswitch = "close"
773 }
774 var batswitch
775 if (detaildata.Voltage_alarm_switch == true) {
776 batswitch = "open"
777 } else {
778 batswitch = "close"
779 }
780 var str2 = "<p>-- Temperature alarm switch status: " +
781 tempswitch + "</p>" +
782 "<p>-- Humidity alarm switch status: " + humswitch +
783 "</p>" +
784 "<p>-- Voltage alarm switch status: " + batswitch
785 }
786
787 if (name == "High Temperature" && status ==
788 "ACTIVE_UNACK") {
789 var emailstr =
790 "<div><p><span style='color: black; font-weight: bold'>" +
791 "Device " + label + " has alarm:</span></p>" +
792 "<p><span style='color: red; font-weight: bold'>-- High Temperature Alarm</span></p>" +
793 "<p>-- Current Temperature : " + detaildata
794 .TempC_SHT + "</p><br>" +
795 "<p>Device Configure:</p>" +
796 "<p>-- Temperature Threshold : min: " + detaildata
797 .Low_temperature_alarm + ", max: " + detaildata
798 .High_temperature_alarm + "</p>" +
799 "<p>-- Humidity Threshold: min: " + detaildata
800 .Low_humidity_alarm + ", max:" + detaildata
801 .High_humidity_alarm + "</p>" +
802 "<p>-- Battery threshold: min: " + detaildata
803 .Low_voltage_alarm + "</p>" + str2 + "</div>"
804 return {
805 msg: {
806 "data": emailstr
807 },
808 metadata: metadata,
809 msgType: msgType
810 };
811 } else if (name == "Low Temperature" && status ==
812 "ACTIVE_UNACK") {
813 var emailstr =
814 "<div><p><span style='color: black; font-weight: bold'>" +
815 "Device " + label + " has alarm:</span></p>" +
816 "<p><span style='color: red; font-weight: bold'>-- Low Temperature Alarm</span></p>" +
817 "<p>-- Current Temperature : " + detaildata
818 .TempC_SHT + "</p><br>" +
819 "<p>Device Configure:</p>" +
820 "<p>-- Temperature Threshold : min: " + detaildata
821 .Low_temperature_alarm + ", max: " + detaildata
822 .High_temperature_alarm + "</p>" +
823 "<p>-- Humidity Threshold: min: " + detaildata
824 .Low_humidity_alarm + ", max:" + detaildata
825 .High_humidity_alarm + "</p>" +
826 "<p>-- Battery threshold: min: " + detaildata
827 .Low_voltage_alarm + "</p>" + str2 + "</div>"
828
829 return {
830 msg: {
831 "data": emailstr
832 },
833 metadata: metadata,
834 msgType: msgType
835 };
836
837 } else if (name == "Device Disconnected" && status ==
838 "ACTIVE_UNACK") {
839 var time1 = locatime(Number(detaildata.lastActivityTime))
840 //var time1 = detaildata.lastActivityTime
841 // var chazhi = parseInt((detaildata.inactivityAlarmTime-detaildata.lastActivityTime)/1000/60)
842 // var emailstr =
843 // "<div><p><span style='color: red; font-weight: bold'>" +
844 // "Device " + label + " has Alarm</span></p><p>Last activity time: "+time1+"</p><p>Last Uplink: 21"+"minutes ago</p></div>"
845
846 var emailstr ="Device " + label + " has Alarm##Last activity time: "+time1+"##Last Uplink: 21minutes ago"
847 var newType = "POST_TELEMETRY_REQUEST"
848 return {
849 msg:emailstr,
850 metadata: metadata,
851 msgType: newType
852 }
853 } else if (name == "High humidity" && status ==
854 "ACTIVE_UNACK") {
855 var emailstr =
856 "<div><p><span style='color: black; font-weight: bold'>" +
857 "Device " + label + " has alarm:</span></p>" +
858 "<p><span style='color: red; font-weight: bold'>-- High Humidity Alarm</span></p>" +
859 "<p>-- Current Temperature : " + detaildata
860 .Hum_SHT + "</p><br>" +
861 "<p>Device Configure:</p>" +
862 "<p>-- Temperature Threshold : min: " + detaildata
863 .Low_temperature_alarm + ", max: " + detaildata
864 .High_temperature_alarm + "</p>" +
865 "<p>-- Humidity Threshold: min: " + detaildata
866 .Low_humidity_alarm + ", max:" + detaildata
867 .High_humidity_alarm + "</p>" +
868 "<p>-- Battery threshold: min: " + detaildata
869 .Low_voltage_alarm + "</p>" + str2 + "</div>"
870
871 return {
872 msg: {
873 "data": emailstr
874 },
875 metadata: metadata,
876 msgType: msgType
877 };
878 } else if (name == "Low humidity" && status ==
879 "ACTIVE_UNACK") {
880 var emailstr =
881 "<div><p><span style='color: black; font-weight: bold'>" +
882 "Device " + label + " has alarm:</span></p>" +
883 "<p><span style='color: red; font-weight: bold'>-- Low Humidity Alarm</span></p>" +
884 "<p>-- Current Temperature : " + detaildata
885 .Hum_SHT + "</p><br>" +
886 "<p>Device Configure:</p>" +
887 "<p>-- Temperature Threshold : min: " + detaildata
888 .Low_temperature_alarm + ", max: " + detaildata
889 .High_temperature_alarm + "</p>" +
890 "<p>-- Humidity Threshold: min: " + detaildata
891 .Low_humidity_alarm + ", max:" + detaildata
892 .High_humidity_alarm + "</p>" +
893 "<p>-- Battery threshold: min: " + detaildata
894 .Low_voltage_alarm + "</p>" + str2 + "</div>"
895
896 return {
897 msg: {
898 "data": emailstr
899 },
900 metadata: metadata,
901 msgType: msgType
902 };
903 } else if (name == "Low voltage" && status ==
904 "ACTIVE_UNACK") {
905 var emailstr =
906 "<div><p><span style='color: black; font-weight: bold'>" +
907 "Device " + label + " has alarm:</span></p>" +
908 "<p><span style='color: red; font-weight: bold'>-- Low Voltage Alarm</span></p>" +
909 "<p>-- Current Temperature : " + detaildata.BatV +
910 "</p><br>" +
911 "<p>Device Configure:</p>" +
912 "<p>-- Temperature Threshold : min: " + detaildata
913 .Low_temperature_alarm + ", max: " + detaildata
914 .High_temperature_alarm + "</p>" +
915 "<p>-- Humidity Threshold: min: " + detaildata
916 .Low_humidity_alarm + ", max:" + detaildata
917 .High_humidity_alarm + "</p>" +
918 "<p>-- Battery threshold: min: " + detaildata
919 .Low_voltage_alarm + "</p>" + str2 + "</div>"
920
921 return {
922 msg: {
923 "data": emailstr
924 },
925 metadata: metadata,
926 msgType: msgType
927 };
928 } else if (name == "High Temperature" && status ==
929 "CLEARED_UNACK") {
930 var emailstr =
931 "<div><p><span style='color: green; font-weight: bold'>Device " +
932 label +
933 " High Temperature Alarm Cleared</span></p>" +
934 "<p>-- Current Temperature : " + detaildata
935 .TempC_SHT + "</p><br>" +
936 "<p>Device Configure:</p>" +
937 "<p>-- Temperature Threshold : min: " + detaildata
938 .Low_temperature_alarm + ", max: " + detaildata
939 .High_temperature_alarm + "</p>" +
940 "<p>-- Humidity Threshold: min: " + detaildata
941 .Low_humidity_alarm + ", max:" + detaildata
942 .High_humidity_alarm + "</p>" +
943 "<p>-- Battery threshold: min: " + detaildata
944 .Low_voltage_alarm + "</p>" + str2 + "</div>"
945
946 return {
947 msg: {
948 "data": emailstr
949 },
950 metadata: metadata,
951 msgType: msgType
952 };
953 } else if (name == "Low Temperature" && status ==
954 "CLEARED_UNACK") {
955 var emailstr =
956 "<div><p><span style='color: green; font-weight: bold'>Device " +
957 label +
958 " Low Temperature Alarm Cleared</span></p>" +
959 "<p>-- Current Temperature : " + detaildata
960 .TempC_SHT + "</p><br>" +
961 "<p>Device Configure:</p>" +
962 "<p>-- Temperature Threshold : min: " + detaildata
963 .Low_temperature_alarm + ", max: " + detaildata
964 .High_temperature_alarm + "</p>" +
965 "<p>-- Humidity Threshold: min: " + detaildata
966 .Low_humidity_alarm + ", max:" + detaildata
967 .High_humidity_alarm + "</p>" +
968 "<p>-- Battery threshold: min: " + detaildata
969 .Low_voltage_alarm + "</p>" + str2 + "</div>"
970
971 return {
972 msg: {
973 "data": emailstr
974 },
975 metadata: metadata,
976 msgType: msgType
977 };
978 } else if (name == "High humidity" && status ==
979 "CLEARED_UNACK") {
980 var emailstr =
981 "<div><p><span style='color: green; font-weight: bold'>Device " +
982 label + " High Humidity Alarm Cleared</span></p>" +
983 "<p>-- Current Temperature : " + detaildata
984 .Hum_SHT + "</p><br>" +
985 "<p>Device Configure:</p>" +
986 "<p>-- Temperature Threshold : min: " + detaildata
987 .Low_temperature_alarm + ", max: " + detaildata
988 .High_temperature_alarm + "</p>" +
989 "<p>-- Humidity Threshold: min: " + detaildata
990 .Low_humidity_alarm + ", max:" + detaildata
991 .High_humidity_alarm + "</p>" +
992 "<p>-- Battery threshold: min: " + detaildata
993 .Low_voltage_alarm + "</p>" + str2 + "</div>"
994
995 return {
996 msg: {
997 "data": emailstr
998 },
999 metadata: metadata,
1000 msgType: msgType
1001 };
1002 } else if (name == "Low humidity" && status ==
1003 "CLEARED_UNACK") {
1004 var emailstr =
1005 "<div><p><span style='color: green; font-weight: bold'>Device " +
1006 label + " Low Humidity Alarm Cleared</span></p>" +
1007 "<p>-- Current Temperature : " + detaildata
1008 .Hum_SHT + "</p><br>" +
1009 "<p>Device Configure:</p>" +
1010 "<p>-- Temperature Threshold : min: " + detaildata
1011 .Low_temperature_alarm + ", max: " + detaildata
1012 .High_temperature_alarm + "</p>" +
1013 "<p>-- Humidity Threshold: min: " + detaildata
1014 .Low_humidity_alarm + ", max:" + detaildata
1015 .High_humidity_alarm + "</p>" +
1016 "<p>-- Battery threshold: min: " + detaildata
1017 .Low_voltage_alarm + "</p>" + str2 + "</div>"
1018 return {
1019 msg: {
1020 "data": emailstr
1021 },
1022 metadata: metadata,
1023 msgType: msgType
1024 };
1025 } else if (name == "Low voltage" && status ==
1026 "CLEARED_UNACK") {
1027
1028 var emailstr =
1029 "<div><p><span style='color: green; font-weight: bold'>Device " +
1030 label + " Low Voltage Alarm Cleared</span></p>" +
1031 "<p>-- Current Temperature : " + detaildata.BatV +
1032 "</p><br><br>" +
1033 "<p>Device Configure:</p>" +
1034 "<p>-- Temperature Threshold : min: " + detaildata
1035 .Low_temperature_alarm + ", max: " + detaildata
1036 .High_temperature_alarm + "</p>" +
1037 "<p>-- Humidity Threshold: min: " + detaildata
1038 .Low_humidity_alarm + ", max:" + detaildata
1039 .High_humidity_alarm + "</p>" +
1040 "<p>-- Battery threshold: min: " + detaildata
1041 .Low_voltage_alarm + "</p>" + str2 + "</div>"
1042
1043 return {
1044 msg: {
1045 "data": emailstr
1046 },
1047 metadata: metadata,
1048 msgType: msgType
1049 };
1050 } else if (name == "Device Disconnected" && status ==
1051 "CLEARED_UNACK") {
1052 var time1 = locatime(Number(detaildata.lastActivityTime))
1053 //var time1 = detaildata.lastActivityTime
1054 // var chazhi = parseInt((detaildata.inactivityAlarmTime-detaildata.lastActivityTime)/1000/60)
1055 // var emailstr =
1056 // "<div><p><span style='color: green; font-weight: bold'>" +
1057 // "Device " + label + " has Alarm Cleared</span></p><p>Last activity time: "+time1+"</p></div>"
1058 var emailstr ="Device " + label + " has Alarm Cleared##Last activity time: "+time1
1059 var newType = "POST_TELEMETRY_REQUEST"
1060 return {
1061 msg: emailstr,
1062 metadata: metadata,
1063 msgType: newType
1064 }
1065 }
1066 {{/code}}
1067
1068 (% class="wikigeneratedid" %)
1069 **Generate Report：**
1070
1071 (% class="wikigeneratedid" %)
1072 [[image:1730865053380-293.png]]
1073
1074 = 5.other =
1075
1076 * If you want to create a similar dashboard, after understanding the case, you can download and import the dashboard, device profiles, rule chains, etc. of the case on GitHub, and make modifications based on them.
1077 * GitHub address：[[https:~~/~~/github.com/ThingsEye-io/te-platform/tree/main/case/Dragino%20Office%20%26%20Factory>>https://github.com/ThingsEye-io/te-platform/tree/main/case/Dragino%20Office%20%26%20Factory]]