Wiki source code of Demo for Smart Office, Factory

Version 52.1 by Hera Guo on 2024/11/07 09:57
Show last authors
1 **Table of Contents:**
2
3 {{toc/}}
4
5
6
7
8
9
10
11 = 1. About this demo =
12
13 This demo is to show the installation for various sensors in Dragino Office, Dragino Facotry & ThingsEye Office. It covers various types of sensors such as Temperature, Humidity, CO2, Water Flow, Vibration & many many.
14
15 User can check this [[Public Share Link>>https://thingseye.io/dashboard/d17f70f0-6b5f-11ef-a329-6fb88c149adb?publicId=33180810-5c40-11ef-a329-6fb88c149adb ]] and see the dash board for this demo. The dash board keeps updating, while the main structure will keep the same. It has **Three Level DashBoard **as decribe below.
16
17 * **First Level - Overview for all branches**: This dashboard shows all branches overview status and location.
18 * **Second Level - Branch Level**: This dashboard shows all sensors installation and status in the selected branch.
19 * **Third Level - Sensor Level**: This dashboard shows the detail reading for a specify sensor
20
21 [[image:Level1.png||height="133" width="298"]] [[image:Arrow.png||height="27" width="51"]] [[image:Level2.png||height="134" width="264"]][[image:Arrow.png||height="27" width="51"]] [[image:2024-09-26 23-47-06.png||height="130" width="256"]]
22
23
24 The rest of this chapter will provide the introduction for how to set up similiar solution.
25
26
27 = 2.Basic configuration instructions =
28
29 When you start a complex IoT project, you first need to learn some basic configuration methods for ThingsEye.
30
31 Here are some instructions you need to know：
32
33 Dashboard creation and some basic configurations:[[https:~~/~~/wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20import%20and%20use%20the%20dashboard%3F/#H3.2.2.1CreatA0alarm>>https://wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20import%20and%20use%20the%20dashboard%3F/#H3.2.2.1CreatA0alarm]]
34
35 Rule chain creation:[[https:~~/~~/wiki.thingseye.io/xwiki/bin/view/Main/Basic%20configuration%20of%20rule%20chains>>https://wiki.thingseye.io/xwiki/bin/view/Main/Basic%20configuration%20of%20rule%20chains/]]
36
37 Devices connected to thingseye：[[https:~~/~~/wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20connect%20my%20devices%20to%20ThingsEye%3F/>>https://wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20connect%20my%20devices%20to%20ThingsEye%3F/]]
38
39 = 3.overview =
40
41 == 3.1 MHierarchical architectureore features ==
42
43 Before we start a project, we first need to understand the organizational structure of the project. Only with a clear outline can our project construction process be smoother
44
45 **Assets：**Dragino Office  、Dragino Factory
46
47 **Devices：**
48
49 Dragino Factory：temperature and humidity measurement×7、Gateway×1
50
51 Dragino Office：temperature and humidity measurement×2、Air quality measurement×4
52
53 == 3.2 Dashboard architecture ==
54
55 In this demo, the dashboard is divided into three layers, namely: home page, asset, and device.
56
57 **home page:**It includes three parts: map, asset list, and all alarm. From this interface, you can see how many factories, offices, and so on there are
58
59 **asset:**It includes three parts: asset map, device list, and asset alarm. From this interface, you can see how many sensors are deployed in the office or project, where they are located, and their alarm status
60
61 **device:**This section displays the specific information collected by the device, and different types of sensors have different display interfaces
62
63 [[image:屏幕截图 2024-11-04 134645.png]]
64
65 First floor：
66
67 [[image:1730702565889-204.png||height="771" width="1445"]]
68
69 Second floor：
70
71 [[image:1730702622551-808.png||height="756" width="1450"]]
72
73 Third floor：
74
75 [[image:1730702656725-496.png||height="775" width="1455"]]
76
77 [[image:1730702814435-805.png||height="797" width="1458"]]
78
79
80 [[image:1730702688377-367.png||height="770" width="1462"]]
81
82 * How many types of devices do you need, how many layers of third level dashboards you need to create.
83
84 == 3.3 Alarm rules ==
85
86 High Temperature、Low Temperature、High humidity、Low humidity、Low voltage、Device Disconnected
87
88 [[image:屏幕截图 2024-11-04 135045.png]]
89
90 = 4.configuration details =
91
92 After understanding the architecture and layering of the complete project, we can start configuring it
93
94 == 4.1 Dashboard configuration details ==
95
96 === 4.1.1.Data source (Entity aliases) ===
97
98 detail:Obtain data based on dashboard status
99
100 [[image:1730709424998-915.png||height="729" width="1436"]]
101
102 Alarm:Obtain alarm information
103
104 [[image:1730709479828-595.png||height="696" width="1435"]]
105
106 Dragino&GXHL,Ltd:Obtain data through asset types
107
108 [[image:1730709511861-439.png||height="714" width="1435"]]
109
110 Selected Supermarket:Retrieve devices by device type
111
112 [[image:1730709527720-418.png||height="751" width="1433"]]
113
114 Supermarket Devices:Obtain data through device type
115
116 [[image:1730709555797-383.png||height="726" width="1434"]]
117
118 LHT65N Device：Obtain data based on device type
119
120 [[image:1730857191863-514.png||height="725" width="1433"]]
121
122 === 4.1.2.Page Configuration ===
123
124 ==== 4.1.2.1、Configure the interface of the third layer Davies. ====
125
126 ==== 4.1.2.2、Configure the interface of the second layer asset ====
127
128 ===== 4.1.2.2.1 Equipment distribution diagram： =====
129
130 **Data：**
131
132 [[image:1730770392454-317.png||height="745" width="1439"]]
133
134 **Appearannce：**In this module, we need to arrange our devices in the corresponding positions and use icons to display our devices. Therefore, in the Appearance interface, we need to configure them
135
136 **Tooltip function：**This module displays the current information of the device
137
138 [[image:1730857537965-184.png]]
139
140 {{code language="none"}}
141 var msg = data
142 if(msg.Label=="gateway" && msg.type == "gateway"){
143 var stauts
144 if (msg.gatewaystauts=="true"){
145 stauts = "Connect"
146 }
147 else{
148 stauts = "Disconnected"
149 }
150 var str = "<b>"+msg.entityName+"</b><br/><b>"+stauts+"</b><br/>"
151 return str
152 }
153 else if(msg.type=="gxhl01" && msg.Label!="gateway"){
154 var str = "<b>"+msg.entityName+"</b><br/><b>"+msg.Label+"</b><br/><b>Bat:</b>"+msg.BatV+"V<br/><b>Temperature:</b>"+ msg.TempC_SHT+ "°C<br/><b>Humidity:</b>"+msg.Hum_SHT+"%"
155 return str
156 }
157 else{
158 var str = "<b>"+msg.entityName+"</b><br/><b>"+msg.Label+"</b><br/><b>Bat:</b>"+msg.BatV+"V<br/><b>Temperature:</b>"+ msg.temperature+ "°C<br/><b>Humidity:"+msg.humidity+"%"+"</b><br/>"+
159 "<b>Co2:"+msg.co2+"</b></br><b>Air_Pressure:"+msg.air_pressure
160
161 return str
162 }
163 {{/code}}
164
165 (% class="wikigeneratedid" id="HMarkerimagefunctionFF1A" %)
166 **Marker image function：**This module can display different icons based on different types of sensors and their status to achieve its functionality
167
168 (% class="wikigeneratedid" %)
169 [[image:1730857750749-240.png]]
170
171 {{code language="none"}}
172 var res
173 var msg = data
174 if(msg.Label=="gateway" && msg.type=="gateway"){
175 if (msg.gatewaystauts == "true"){
176 res = {
177 url: images[3],
178 size: 40
179 }
180 }
181 else{
182 res = {
183 url: images[2],
184 size: 40
185 }
186 }}
187 else if(msg.Label!="gateway" && msg.type=="gxhl01" ){
188 if (msg.active=="false"){
189 res = {
190 url: images[1],
191 size: 40
192 }}
193 else{
194 res = {
195 url: images[0],
196 size: 40
197 }
198 }
199 }
200 else if(msg.type=="LWL02"){
201 if (msg.WATER_LEAK_STATUS=="0"){
202 res = {
203 url: images[6],
204 size: 40
205 }}
206 else{
207 res = {
208 url: images[7],
209 size: 40
210 }
211 }
212 }
213 else if(msg.type=="LDS02"){
214 if (msg.DOOR_OPEN_STATUS=="0"){
215 res = {
216 url: images[5],
217 size: 40
218 }}
219 else{
220 res = {
221 url: images[8],
222 size: 40
223 }
224 }
225 }
226 else if(msg.type=="LDS12"){
227 res = {
228 url: images[10],
229 size: 40
230 }}
231 else if(msg.type=="SE01"){
232 res = {
233 url: images[9],
234 size: 40
235 }}
236 else if(msg.type=="PB01"){
237 res = {
238 url: images[11],
239 size: 40
240 }}
241 else if(msg.type=="S31b"){
242 res = {
243 url: images[12],
244 size: 40
245 }}
246 else if(msg.type=="LHT65N"){
247 res = {
248 url: images[13],
249 size: 40
250 }}
251 else{
252 res = {
253 url: images[4],
254 size: 40
255 }
256 }
257 return res;
258 {{/code}}
259
260 (% class="wikigeneratedid" %)
261 [[image:1730770875793-351.png]]
262
263 (% class="wikigeneratedid" %)
264 **Actions:**We need to implement the function of entering the details interface through the corresponding device icon, so in this module, we need to add actions to achieve redirection
265
266 {{code language="none"}}
267 var entitySubType;
268 var $injector = widgetContext.$scope.$injector;
269 $injector.get(widgetContext.servicesMap.get('entityService')).getEntity(entityId.entityType, entityId.id)
270 .subscribe(function(data) {
271 entitySubType = data.type;
272 console.log(entitySubType)
273 if (entitySubType == 'gateway') {
274 openDashboardStates('gateway_detail');
275 } else if (entitySubType == 'gxhl01') {
276 openDashboardStates('detail');
277 }
278 else if(entitySubType == 'AQS01-dragino-office'){
279 openDashboardStates("aqs01_detail")
280 }
281 else if (entitySubType == 'LDS12') {
282 openDashboardStates('lds12_detail');
283 }
284 else if (entitySubType == 'LDS02') {
285 openDashboardStates('lds02_detail');
286 }
287 else if (entitySubType == 'SE01') {
288 openDashboardStates('se01_detail');
289 }
290 else if (entitySubType == 'PB01') {
291 openDashboardStates('pb01_detail');
292 }
293 else if (entitySubType == 'LWL02') {
294 openDashboardStates('lwl02_detail');
295 }
296 else if (entitySubType == 'LPS8N') {
297 openDashboardStates('lps8n_detail');
298 }
299 else if (entitySubType == 'LHT65N') {
300 openDashboardStates('lht65n_detail');
301 }
302 else if (entitySubType == 'S31b') {
303 openDashboardStates('s31b_detail');
304 }
305 });
306
307 function openDashboardStates(statedId) {
308 var stateParams = widgetContext.stateController.getStateParams();
309 var params = {
310 entityId: entityId,
311 entityName: entityName
312 };
313
314 if (stateParams.city) {
315 params.city = stateParams.city;
316 }
317
318 widgetContext.stateController.openState(statedId, params, false);
319 }
320
321 {{/code}}
322
323 [[image:1730771103096-522.png]]
324
325 ===== 4.1.2.2.2 Device List =====
326
327 (% class="wikigeneratedid" id="HDataFF1A" %)
328 **Data：**
329
330 [[image:1730771199343-553.png]]
331
332 **Actions：**Equipment distribution diagram: In this module, functions need to be implemented such as adding devices, editing devices, deleting devices, and jumping to the device details page. Therefore, the following actions need to be added:
333
334 [[image:1730771228766-212.png]]
335
336 (% class="wikigeneratedid" id="HEditdeviceFF1A" %)
337 **Edit device：**Implementation function: Device editing
338
339 [[image:1730771256045-238.png]]
340
341 {{code language="none"}}
342 let $injector = widgetContext.$scope.$injector;
343 let customDialog = $injector.get(widgetContext.servicesMap.get('customDialog'));
344 let deviceService = $injector.get(widgetContext.servicesMap.get('deviceService'));
345 let attributeService = $injector.get(widgetContext.servicesMap.get('attributeService'));
346
347 openEditDeviceDialog();
348
349 function openEditDeviceDialog() {
350 customDialog.customDialog(htmlTemplate, EditDeviceDialogController).subscribe();
351 }
352
353 function EditDeviceDialogController(instance) {
354 let vm = instance;
355
356 vm.device = null;
357 vm.attributes = {};
358
359 vm.editDeviceFormGroup = vm.fb.group({
360 deviceName: ['', [vm.validators.required]],
361 deviceType: ['', [vm.validators.required]],
362 deviceLabel: [''],
363 attributes: vm.fb.group({
364 latitude: [null],
365 longitude: [null]
366 })
367 });
368
369 vm.cancel = function() {
370 vm.dialogRef.close(null);
371 };
372
373 vm.save = function() {
374 vm.editDeviceFormGroup.markAsPristine();
375 if (vm.editDeviceFormGroup.get('deviceType').value !== vm.device.type) {
376 delete vm.device.deviceProfileId;
377 }
378 vm.device.name = vm.editDeviceFormGroup.get('deviceName').value,
379 vm.device.type = vm.editDeviceFormGroup.get('deviceType').value,
380 vm.device.label = vm.editDeviceFormGroup.get('deviceLabel').value
381 deviceService.saveDevice(vm.device).subscribe(
382 function () {
383 saveAttributes().subscribe(
384 function () {
385 widgetContext.updateAliases();
386 vm.dialogRef.close(null);
387 }
388 );
389 }
390 );
391 };
392
393 getEntityInfo();
394
395 function getEntityInfo() {
396 deviceService.getDevice(entityId.id).subscribe(
397 function (device) {
398 attributeService.getEntityAttributes(entityId, 'SERVER_SCOPE',
399 ['latitude', 'longitude']).subscribe(
400 function (attributes) {
401 for (let i = 0; i < attributes.length; i++) {
402 vm.attributes[attributes[i].key] = attributes[i].value;
403 }
404 vm.device = device;
405 vm.editDeviceFormGroup.patchValue(
406 {
407 deviceName: vm.device.name,
408 deviceType: vm.device.type,
409 deviceLabel: vm.device.label,
410 attributes: {
411 latitude: vm.attributes.latitude,
412 longitude: vm.attributes.longitude
413 }
414 }, {emitEvent: false}
415 );
416 }
417 );
418 }
419 );
420 }
421
422 function saveAttributes() {
423 let attributes = vm.editDeviceFormGroup.get('attributes').value;
424 let attributesArray = [];
425 for (let key in attributes) {
426 attributesArray.push({key: key, value: attributes[key]});
427 }
428 if (attributesArray.length > 0) {
429 return attributeService.saveEntityAttributes(entityId, 'SERVER_SCOPE', attributesArray);
430 } else {
431 return widgetContext.rxjs.of([]);
432 }
433 }
434 }
435 {{/code}}
436
437 **Delete device：**Implementation function: Device deletion
438
439 [[image:1730771318657-502.png]]
440
441 {{code language="none"}}
442 let $injector = widgetContext.$scope.$injector;
443 let dialogs = $injector.get(widgetContext.servicesMap.get('dialogs'));
444 let deviceService = $injector.get(widgetContext.servicesMap.get('deviceService'));
445
446 openDeleteDeviceDialog();
447
448 function openDeleteDeviceDialog() {
449 let title = "Are you sure you want to delete the device " + entityName + "?";
450 let content = "Be careful, after the confirmation, the device and all related data will become unrecoverable!";
451 dialogs.confirm(title, content, 'Cancel', 'Delete').subscribe(
452 function (result) {
453 if (result) {
454 deleteDevice();
455 }
456 }
457 );
458 }
459
460 function deleteDevice() {
461 deviceService.deleteDevice(entityId.id).subscribe(
462 function () {
463 widgetContext.updateAliases();
464 }
465 );
466 }
467
468 {{/code}}
469
470 **jump:I**mplementation function: Jump to the device details page
471
472 [[image:1730771386258-676.png]]
473
474 {{code language="none"}}
475 console.log(entityName)
476 var entitySubType;
477 var $injector = widgetContext.$scope.$injector;
478 //console.log($injector)
479 $injector.get(widgetContext.servicesMap.get('entityService')).getEntity(entityId.entityType, entityId.id)
480 .subscribe(function(data) {
481 console.log(data)
482 entitySubType = data.type;
483 console.log(entitySubType)
484 if (entitySubType == 'AQS01-dragino-office') {
485 openDashboardStates('aqs01_detail');
486 }else if (entitySubType == 'gateway') {
487 openDashboardStates('gateway_detail');
488 } else if (entitySubType == 'gxhl01') {
489 openDashboardStates('detail');
490
491 } else if (entitySubType == 'tank-type1') {
492 openDashboardStates('test1');
493 }
494 else if (entitySubType == 'LDS12') {
495 openDashboardStates('lds12_detail');
496 }
497 else if (entitySubType == 'LDS02') {
498 openDashboardStates('lds02_detail');
499 }
500 else if (entitySubType == 'SE01') {
501 openDashboardStates('se01_detail');
502 }
503 else if (entitySubType == 'PB01') {
504 openDashboardStates('pb01_detail');
505 }
506 else if (entitySubType == 'LWL02') {
507 openDashboardStates('lwl02_detail');
508 }
509 else if (entitySubType == 'LPS8N') {
510 openDashboardStates('lps8n_detail');
511 }
512 else if (entitySubType == 'LHT65N') {
513 openDashboardStates('lht65n_detail');
514 }
515 else if (entitySubType == 'S31b') {
516 openDashboardStates('s31b_detail');
517 }
518 });
519
520 function openDashboardStates(statedId) {
521 var stateParams = widgetContext.stateController.getStateParams();
522 //console.log(stateParams)
523 var params = {
524 entityId: entityId,
525 entityName: entityName
526 };
527 widgetContext.stateController.updateState(statedId, params, false);
528 }
529 {{/code}}
530
531 (% class="wikigeneratedid" id="H-1" %)
532 **Add device：**Implementation function: Add device
533
534 [[image:1730771441589-122.png]]
535
536 {{code language="none"}}
537 let $injector = widgetContext.$scope.$injector;
538 let customDialog = $injector.get(widgetContext.servicesMap.get('customDialog'));
539 let deviceService = $injector.get(widgetContext.servicesMap.get('deviceService'));
540 let attributeService = $injector.get(widgetContext.servicesMap.get('attributeService'));
541
542 openAddDeviceDialog();
543
544 function openAddDeviceDialog() {
545 customDialog.customDialog(htmlTemplate, AddDeviceDialogController).subscribe();
546 }
547
548 function AddDeviceDialogController(instance) {
549 let vm = instance;
550
551 vm.addDeviceFormGroup = vm.fb.group({
552 deviceName: ['', [vm.validators.required]],
553 deviceType: ['', [vm.validators.required]],
554 deviceLabel: [''],
555 attributes: vm.fb.group({
556 latitude: [null],
557 longitude: [null]
558 })
559 });
560
561 vm.cancel = function() {
562 vm.dialogRef.close(null);
563 };
564
565 vm.save = function() {
566 vm.addDeviceFormGroup.markAsPristine();
567 let device = {
568 name: vm.addDeviceFormGroup.get('deviceName').value,
569 type: vm.addDeviceFormGroup.get('deviceType').value,
570 label: vm.addDeviceFormGroup.get('deviceLabel').value
571 };
572 deviceService.saveDevice(device).subscribe(
573 function (device) {
574 saveAttributes(device.id).subscribe(
575 function () {
576 widgetContext.updateAliases();
577 vm.dialogRef.close(null);
578 }
579 );
580 }
581 );
582 };
583
584 function saveAttributes(entityId) {
585 let attributes = vm.addDeviceFormGroup.get('attributes').value;
586 let attributesArray = [];
587 for (let key in attributes) {
588 attributesArray.push({key: key, value: attributes[key]});
589 }
590 if (attributesArray.length > 0) {
591 return attributeService.saveEntityAttributes(entityId, "SERVER_SCOPE", attributesArray);
592 } else {
593 return widgetContext.rxjs.of([]);
594 }
595 }
596 }
597 {{/code}}
598
599 ==== ====
600
601 ===== 4.1.2.2.3 Asset Alarm: =====
602
603 **Data：**
604
605 [[image:1730771504586-433.png]]
606
607 ==== 4.1.2.3、Configure the first layer menu interface ====
608
609 ===== 4.1.2.3.1 Map: =====
610
611 **Data:**
612
613 ===== =====
614
615 [[image:1730710271230-716.png||height="729" width="1427"]]
616
617 **Actions**:The map interface has two actions, among which Select supermarket can refresh the device list and related alarms on the right side to enter the location, and Supermarket_detail can jump to the second level physical interface to view the details of the location based on the selected location
618
619 [[image:1730710850458-781.png||height="770" width="1429"]]
620
621 **Select supermarket:**Implementation function: Refresh the side page
622
623 {{code language="none"}}
624 var params = widgetContext.stateController.getStateParams();
625 var selectedSupermarket = params['selectedSupermarket'];
626 if (selectedSupermarket && selectedSupermarket.entityId.id === entityId.id) {
627 params['selectedSupermarket'] = null;
628 } else {
629 params['selectedSupermarket'] = { entityId: entityId, entityName: entityName, entityLabel: entityLabel };
630 }
631 widgetContext.stateController.updateState(null, params);
632 {{/code}}
633
634 [[image:1730710875401-848.png||height="767" width="1429"]]
635
636 **Supermarket_detail:**Implementation function: Jump to the asset details page
637
638 {{code language="none"}}
639 var params = JSON.parse(JSON.stringify(widgetContext.stateController.getStateParams()));
640 params['selectedSupermarket'] = {
641 entityId: entityId,
642 entityName: entityName,
643 entityLabel: entityLabel,
644 };
645 params['targetEntityParamName'] = 'selectedSupermarket';
646 params['selectedDevice'] = null;
647
648 widgetContext.stateController.openState('svgmap', params);
649 {{/code}}
650
651 [[image:1730710990334-601.png||height="772" width="1433"]]
652
653 * (((
654 In this demo, exclusive map icons were set as follows:
655 )))
656
657 {{code language="none"}}
658 var res = {
659 url: images[0],
660 size: 66
661 };
662 return res;
663 {{/code}}
664
665 [[image:1730710395303-672.png||height="771" width="1438"]]
666
667 ===== 4.1.2.3.1 Asset List: =====
668
669 **Data:**
670
671 [[image:1730710693066-349.png||height="772" width="1439"]]
672
673 **Actions:**The Assets List interface has an action, which is the same as the Supermarket_details in the Map. You can jump to the second level entity interface to view the details of the selected location based on its location
674
675 [[image:1730712335338-750.png||height="751" width="1423"]]
676
677 [[image:1730712473941-913.png||height="781" width="1422"]]
678
679 All Alarms:
680
681 [[image:1730712539209-554.png||height="764" width="1424"]]
682
683 == 4.2 Alarm configuration details ==
684
685 === 4.2.1 High temperature ===
686
687 Creat:
688
689 [[image:1730862483514-101.png||height="750" width="1407"]]
690
691 Clear:
692
693 [[image:1730862584519-902.png||height="758" width="1404"]]
694
695 === 4.2.2 Low Temperature ===
696
697 Creat:
698
699 [[image:1730863708259-750.png||height="752" width="1403"]]
700
701 Clear:
702
703 [[image:1730863750414-979.png||height="746" width="1403"]]
704
705 === 4.2.3 High humidity ===
706
707 Creat:
708
709 [[image:1730864045747-876.png||height="752" width="1396"]]
710
711 Clear:
712
713 [[image:1730864077395-395.png||height="735" width="1393"]]
714
715 === 4.2.4 Low humidity ===
716
717 Creat：
718
719 [[image:1730864117808-484.png||height="741" width="1392"]]
720
721 Clear：
722
723 [[image:1730864159071-895.png||height="745" width="1392"]]
724
725 === 4.2.5 Low voltage ===
726
727 Creat：
728
729 [[image:1730864207037-477.png||height="740" width="1388"]]
730
731 Clear：
732
733 [[image:1730864250506-111.png||height="735" width="1389"]]
734
735 === 4.2.6 Device Disconnected ===
736
737 Creat：
738
739 [[image:1730864293216-991.png||height="739" width="1387"]]
740
741 Clear：
742
743 [[image:1730864331859-740.png||height="735" width="1385"]]
744
745 == 4.3 Rule chain configuration details ==
746
747 [[image:1730864784118-474.png]]
748
749 **Script：**Email configuration for sending device alarm information
750
751 [[image:1730864676542-406.png||height="732" width="1384"]]
752
753 {{code language="none"}}
754 function locatime(timenumber){
755 var date = new Date(timenumber)
756 return date.toLocaleDateString() + ' ' + date.toLocaleTimeString()
757 }
758 var name = msg.name
759 var devicename = msg.originatorName
760 var label = msg.originatorLabel
761 var status = msg.status
762 var detaildata =JSON.parse(msg.details.data)
763 var tempswitch
764
765 if (name != "Device Disconnected") {
766 //detaildata=JSON.parse(msg.details.data)
767 if (detaildata.Temperature_alarm_switch == true) {
768 tempswitch = "open"
769 } else {
770 tempswitch = "close"
771 }
772 var humswitch
773 if (detaildata.Humidity_alarm_switch == true) {
774 humswitch = "open"
775 } else {
776 humswitch = "close"
777 }
778 var batswitch
779 if (detaildata.Voltage_alarm_switch == true) {
780 batswitch = "open"
781 } else {
782 batswitch = "close"
783 }
784 var str2 = "<p>-- Temperature alarm switch status: " +
785 tempswitch + "</p>" +
786 "<p>-- Humidity alarm switch status: " + humswitch +
787 "</p>" +
788 "<p>-- Voltage alarm switch status: " + batswitch
789 }
790
791 if (name == "High Temperature" && status ==
792 "ACTIVE_UNACK") {
793 var emailstr =
794 "<div><p><span style='color: black; font-weight: bold'>" +
795 "Device " + label + " has alarm:</span></p>" +
796 "<p><span style='color: red; font-weight: bold'>-- High Temperature Alarm</span></p>" +
797 "<p>-- Current Temperature : " + detaildata
798 .TempC_SHT + "</p><br>" +
799 "<p>Device Configure:</p>" +
800 "<p>-- Temperature Threshold : min: " + detaildata
801 .Low_temperature_alarm + ", max: " + detaildata
802 .High_temperature_alarm + "</p>" +
803 "<p>-- Humidity Threshold: min: " + detaildata
804 .Low_humidity_alarm + ", max:" + detaildata
805 .High_humidity_alarm + "</p>" +
806 "<p>-- Battery threshold: min: " + detaildata
807 .Low_voltage_alarm + "</p>" + str2 + "</div>"
808 return {
809 msg: {
810 "data": emailstr
811 },
812 metadata: metadata,
813 msgType: msgType
814 };
815 } else if (name == "Low Temperature" && status ==
816 "ACTIVE_UNACK") {
817 var emailstr =
818 "<div><p><span style='color: black; font-weight: bold'>" +
819 "Device " + label + " has alarm:</span></p>" +
820 "<p><span style='color: red; font-weight: bold'>-- Low Temperature Alarm</span></p>" +
821 "<p>-- Current Temperature : " + detaildata
822 .TempC_SHT + "</p><br>" +
823 "<p>Device Configure:</p>" +
824 "<p>-- Temperature Threshold : min: " + detaildata
825 .Low_temperature_alarm + ", max: " + detaildata
826 .High_temperature_alarm + "</p>" +
827 "<p>-- Humidity Threshold: min: " + detaildata
828 .Low_humidity_alarm + ", max:" + detaildata
829 .High_humidity_alarm + "</p>" +
830 "<p>-- Battery threshold: min: " + detaildata
831 .Low_voltage_alarm + "</p>" + str2 + "</div>"
832
833 return {
834 msg: {
835 "data": emailstr
836 },
837 metadata: metadata,
838 msgType: msgType
839 };
840
841 } else if (name == "Device Disconnected" && status ==
842 "ACTIVE_UNACK") {
843 var time1 = locatime(Number(detaildata.lastActivityTime))
844 //var time1 = detaildata.lastActivityTime
845 // var chazhi = parseInt((detaildata.inactivityAlarmTime-detaildata.lastActivityTime)/1000/60)
846 // var emailstr =
847 // "<div><p><span style='color: red; font-weight: bold'>" +
848 // "Device " + label + " has Alarm</span></p><p>Last activity time: "+time1+"</p><p>Last Uplink: 21"+"minutes ago</p></div>"
849
850 var emailstr ="Device " + label + " has Alarm##Last activity time: "+time1+"##Last Uplink: 21minutes ago"
851 var newType = "POST_TELEMETRY_REQUEST"
852 return {
853 msg:emailstr,
854 metadata: metadata,
855 msgType: newType
856 }
857 } else if (name == "High humidity" && status ==
858 "ACTIVE_UNACK") {
859 var emailstr =
860 "<div><p><span style='color: black; font-weight: bold'>" +
861 "Device " + label + " has alarm:</span></p>" +
862 "<p><span style='color: red; font-weight: bold'>-- High Humidity Alarm</span></p>" +
863 "<p>-- Current Temperature : " + detaildata
864 .Hum_SHT + "</p><br>" +
865 "<p>Device Configure:</p>" +
866 "<p>-- Temperature Threshold : min: " + detaildata
867 .Low_temperature_alarm + ", max: " + detaildata
868 .High_temperature_alarm + "</p>" +
869 "<p>-- Humidity Threshold: min: " + detaildata
870 .Low_humidity_alarm + ", max:" + detaildata
871 .High_humidity_alarm + "</p>" +
872 "<p>-- Battery threshold: min: " + detaildata
873 .Low_voltage_alarm + "</p>" + str2 + "</div>"
874
875 return {
876 msg: {
877 "data": emailstr
878 },
879 metadata: metadata,
880 msgType: msgType
881 };
882 } else if (name == "Low humidity" && status ==
883 "ACTIVE_UNACK") {
884 var emailstr =
885 "<div><p><span style='color: black; font-weight: bold'>" +
886 "Device " + label + " has alarm:</span></p>" +
887 "<p><span style='color: red; font-weight: bold'>-- Low Humidity Alarm</span></p>" +
888 "<p>-- Current Temperature : " + detaildata
889 .Hum_SHT + "</p><br>" +
890 "<p>Device Configure:</p>" +
891 "<p>-- Temperature Threshold : min: " + detaildata
892 .Low_temperature_alarm + ", max: " + detaildata
893 .High_temperature_alarm + "</p>" +
894 "<p>-- Humidity Threshold: min: " + detaildata
895 .Low_humidity_alarm + ", max:" + detaildata
896 .High_humidity_alarm + "</p>" +
897 "<p>-- Battery threshold: min: " + detaildata
898 .Low_voltage_alarm + "</p>" + str2 + "</div>"
899
900 return {
901 msg: {
902 "data": emailstr
903 },
904 metadata: metadata,
905 msgType: msgType
906 };
907 } else if (name == "Low voltage" && status ==
908 "ACTIVE_UNACK") {
909 var emailstr =
910 "<div><p><span style='color: black; font-weight: bold'>" +
911 "Device " + label + " has alarm:</span></p>" +
912 "<p><span style='color: red; font-weight: bold'>-- Low Voltage Alarm</span></p>" +
913 "<p>-- Current Temperature : " + detaildata.BatV +
914 "</p><br>" +
915 "<p>Device Configure:</p>" +
916 "<p>-- Temperature Threshold : min: " + detaildata
917 .Low_temperature_alarm + ", max: " + detaildata
918 .High_temperature_alarm + "</p>" +
919 "<p>-- Humidity Threshold: min: " + detaildata
920 .Low_humidity_alarm + ", max:" + detaildata
921 .High_humidity_alarm + "</p>" +
922 "<p>-- Battery threshold: min: " + detaildata
923 .Low_voltage_alarm + "</p>" + str2 + "</div>"
924
925 return {
926 msg: {
927 "data": emailstr
928 },
929 metadata: metadata,
930 msgType: msgType
931 };
932 } else if (name == "High Temperature" && status ==
933 "CLEARED_UNACK") {
934 var emailstr =
935 "<div><p><span style='color: green; font-weight: bold'>Device " +
936 label +
937 " High Temperature Alarm Cleared</span></p>" +
938 "<p>-- Current Temperature : " + detaildata
939 .TempC_SHT + "</p><br>" +
940 "<p>Device Configure:</p>" +
941 "<p>-- Temperature Threshold : min: " + detaildata
942 .Low_temperature_alarm + ", max: " + detaildata
943 .High_temperature_alarm + "</p>" +
944 "<p>-- Humidity Threshold: min: " + detaildata
945 .Low_humidity_alarm + ", max:" + detaildata
946 .High_humidity_alarm + "</p>" +
947 "<p>-- Battery threshold: min: " + detaildata
948 .Low_voltage_alarm + "</p>" + str2 + "</div>"
949
950 return {
951 msg: {
952 "data": emailstr
953 },
954 metadata: metadata,
955 msgType: msgType
956 };
957 } else if (name == "Low Temperature" && status ==
958 "CLEARED_UNACK") {
959 var emailstr =
960 "<div><p><span style='color: green; font-weight: bold'>Device " +
961 label +
962 " Low Temperature Alarm Cleared</span></p>" +
963 "<p>-- Current Temperature : " + detaildata
964 .TempC_SHT + "</p><br>" +
965 "<p>Device Configure:</p>" +
966 "<p>-- Temperature Threshold : min: " + detaildata
967 .Low_temperature_alarm + ", max: " + detaildata
968 .High_temperature_alarm + "</p>" +
969 "<p>-- Humidity Threshold: min: " + detaildata
970 .Low_humidity_alarm + ", max:" + detaildata
971 .High_humidity_alarm + "</p>" +
972 "<p>-- Battery threshold: min: " + detaildata
973 .Low_voltage_alarm + "</p>" + str2 + "</div>"
974
975 return {
976 msg: {
977 "data": emailstr
978 },
979 metadata: metadata,
980 msgType: msgType
981 };
982 } else if (name == "High humidity" && status ==
983 "CLEARED_UNACK") {
984 var emailstr =
985 "<div><p><span style='color: green; font-weight: bold'>Device " +
986 label + " High Humidity Alarm Cleared</span></p>" +
987 "<p>-- Current Temperature : " + detaildata
988 .Hum_SHT + "</p><br>" +
989 "<p>Device Configure:</p>" +
990 "<p>-- Temperature Threshold : min: " + detaildata
991 .Low_temperature_alarm + ", max: " + detaildata
992 .High_temperature_alarm + "</p>" +
993 "<p>-- Humidity Threshold: min: " + detaildata
994 .Low_humidity_alarm + ", max:" + detaildata
995 .High_humidity_alarm + "</p>" +
996 "<p>-- Battery threshold: min: " + detaildata
997 .Low_voltage_alarm + "</p>" + str2 + "</div>"
998
999 return {
1000 msg: {
1001 "data": emailstr
1002 },
1003 metadata: metadata,
1004 msgType: msgType
1005 };
1006 } else if (name == "Low humidity" && status ==
1007 "CLEARED_UNACK") {
1008 var emailstr =
1009 "<div><p><span style='color: green; font-weight: bold'>Device " +
1010 label + " Low Humidity Alarm Cleared</span></p>" +
1011 "<p>-- Current Temperature : " + detaildata
1012 .Hum_SHT + "</p><br>" +
1013 "<p>Device Configure:</p>" +
1014 "<p>-- Temperature Threshold : min: " + detaildata
1015 .Low_temperature_alarm + ", max: " + detaildata
1016 .High_temperature_alarm + "</p>" +
1017 "<p>-- Humidity Threshold: min: " + detaildata
1018 .Low_humidity_alarm + ", max:" + detaildata
1019 .High_humidity_alarm + "</p>" +
1020 "<p>-- Battery threshold: min: " + detaildata
1021 .Low_voltage_alarm + "</p>" + str2 + "</div>"
1022 return {
1023 msg: {
1024 "data": emailstr
1025 },
1026 metadata: metadata,
1027 msgType: msgType
1028 };
1029 } else if (name == "Low voltage" && status ==
1030 "CLEARED_UNACK") {
1031
1032 var emailstr =
1033 "<div><p><span style='color: green; font-weight: bold'>Device " +
1034 label + " Low Voltage Alarm Cleared</span></p>" +
1035 "<p>-- Current Temperature : " + detaildata.BatV +
1036 "</p><br><br>" +
1037 "<p>Device Configure:</p>" +
1038 "<p>-- Temperature Threshold : min: " + detaildata
1039 .Low_temperature_alarm + ", max: " + detaildata
1040 .High_temperature_alarm + "</p>" +
1041 "<p>-- Humidity Threshold: min: " + detaildata
1042 .Low_humidity_alarm + ", max:" + detaildata
1043 .High_humidity_alarm + "</p>" +
1044 "<p>-- Battery threshold: min: " + detaildata
1045 .Low_voltage_alarm + "</p>" + str2 + "</div>"
1046
1047 return {
1048 msg: {
1049 "data": emailstr
1050 },
1051 metadata: metadata,
1052 msgType: msgType
1053 };
1054 } else if (name == "Device Disconnected" && status ==
1055 "CLEARED_UNACK") {
1056 var time1 = locatime(Number(detaildata.lastActivityTime))
1057 //var time1 = detaildata.lastActivityTime
1058 // var chazhi = parseInt((detaildata.inactivityAlarmTime-detaildata.lastActivityTime)/1000/60)
1059 // var emailstr =
1060 // "<div><p><span style='color: green; font-weight: bold'>" +
1061 // "Device " + label + " has Alarm Cleared</span></p><p>Last activity time: "+time1+"</p></div>"
1062 var emailstr ="Device " + label + " has Alarm Cleared##Last activity time: "+time1
1063 var newType = "POST_TELEMETRY_REQUEST"
1064 return {
1065 msg: emailstr,
1066 metadata: metadata,
1067 msgType: newType
1068 }
1069 }
1070 {{/code}}
1071
1072 (% class="wikigeneratedid" %)
1073 **Generate Report：**
1074
1075 (% class="wikigeneratedid" %)
1076 [[image:1730865053380-293.png]]
1077
1078 = 5.other =
1079
1080 * If you want to create a similar dashboard, after understanding the case, you can download and import the dashboard, device profiles, rule chains, etc. of the case on GitHub, and make modifications based on them.
1081 * GitHub address：[[https:~~/~~/github.com/ThingsEye-io/te-platform/tree/main/case/Dragino%20Office%20%26%20Factory>>https://github.com/ThingsEye-io/te-platform/tree/main/case/Dragino%20Office%20%26%20Factory]]