Wiki source code of Demo for Smart Office, Factory

Version 56.1 by Hera Guo on 2024/11/07 10:09
Show last authors
1 **Table of Contents:**
2
3 {{toc/}}
4
5
6
7
8
9
10
11 = 1. About this demo =
12
13 This demo is to show the installation for various sensors in Dragino Office, Dragino Facotry & ThingsEye Office. It covers various types of sensors such as Temperature, Humidity, CO2, Water Flow, Vibration & many many.
14
15 User can check this [[Public Share Link>>https://thingseye.io/dashboard/d17f70f0-6b5f-11ef-a329-6fb88c149adb?publicId=33180810-5c40-11ef-a329-6fb88c149adb ]] and see the dash board for this demo. The dash board keeps updating, while the main structure will keep the same. It has **Three Level DashBoard **as decribe below.
16
17 * **First Level - Overview for all branches**: This dashboard shows all branches overview status and location.
18 * **Second Level - Branch Level**: This dashboard shows all sensors installation and status in the selected branch.
19 * **Third Level - Sensor Level**: This dashboard shows the detail reading for a specify sensor
20
21 [[image:Level1.png||height="133" width="298"]] [[image:Arrow.png||height="27" width="51"]] [[image:Level2.png||height="134" width="264"]][[image:Arrow.png||height="27" width="51"]] [[image:2024-09-26 23-47-06.png||height="130" width="256"]]
22
23
24 The rest of this chapter will provide the introduction for how to set up similiar solution.
25
26
27 = 2.Basic configuration instructions =
28
29 When you start a complex IoT project, you first need to learn some basic configuration methods for ThingsEye.
30
31 Here are some instructions you need to know：
32
33 Dashboard creation and some basic configurations:[[https:~~/~~/wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20import%20and%20use%20the%20dashboard%3F/#H3.2.2.1CreatA0alarm>>https://wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20import%20and%20use%20the%20dashboard%3F/#H3.2.2.1CreatA0alarm]]
34
35 Rule chain creation:[[https:~~/~~/wiki.thingseye.io/xwiki/bin/view/Main/Basic%20configuration%20of%20rule%20chains>>https://wiki.thingseye.io/xwiki/bin/view/Main/Basic%20configuration%20of%20rule%20chains/]]
36
37 Devices connected to thingseye：[[https:~~/~~/wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20connect%20my%20devices%20to%20ThingsEye%3F/>>https://wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20connect%20my%20devices%20to%20ThingsEye%3F/]]
38
39 = 3.overview =
40
41 == 3.1 MHierarchical architectureore features ==
42
43 Before we start a project, we first need to understand the organizational structure of the project. Only with a clear outline can our project construction process be smoother
44
45 **Assets：**Dragino Office  、Dragino Factory
46
47 **Devices：**
48
49 Dragino Factory：temperature and humidity measurement×7、Gateway×1
50
51 Dragino Office：temperature and humidity measurement×2、Air quality measurement×4
52
53 == 3.2 Dashboard architecture ==
54
55 In this demo, the dashboard is divided into three layers, namely: home page, asset, and device.
56
57 **home page:**It includes three parts: map, asset list, and all alarm. From this interface, you can see how many factories, offices, and so on there are
58
59 **asset:**It includes three parts: asset map, device list, and asset alarm. From this interface, you can see how many sensors are deployed in the office or project, where they are located, and their alarm status
60
61 **device:**This section displays the specific information collected by the device, and different types of sensors have different display interfaces
62
63 [[image:屏幕截图 2024-11-04 134645.png]]
64
65 First floor：
66
67 [[image:1730702565889-204.png||height="771" width="1445"]]
68
69 Second floor：
70
71 [[image:1730702622551-808.png||height="756" width="1450"]]
72
73 Third floor：
74
75 [[image:1730702656725-496.png||height="775" width="1455"]]
76
77 [[image:1730702814435-805.png||height="797" width="1458"]]
78
79
80 [[image:1730702688377-367.png||height="770" width="1462"]]
81
82 * How many types of devices do you need, how many layers of third level dashboards you need to create.
83
84 == 3.3 Alarm rules ==
85
86 High Temperature、Low Temperature、High humidity、Low humidity、Low voltage、Device Disconnected
87
88 [[image:屏幕截图 2024-11-04 135045.png]]
89
90 = 4.configuration details =
91
92 After understanding the architecture and layering of the complete project, we can start configuring it
93
94 == 4.1 Dashboard configuration details ==
95
96 === 4.1.1.Data source (Entity aliases) ===
97
98 detail:Obtain data based on dashboard status
99
100 [[image:1730709424998-915.png||height="729" width="1436"]]
101
102 Alarm:Obtain alarm information
103
104 [[image:1730709479828-595.png||height="696" width="1435"]]
105
106 Dragino&GXHL,Ltd:Obtain data through asset types
107
108 [[image:1730709511861-439.png||height="714" width="1435"]]
109
110 Selected Supermarket:Retrieve devices by device type
111
112 [[image:1730709527720-418.png||height="751" width="1433"]]
113
114 Supermarket Devices:Obtain data through device type
115
116 [[image:1730709555797-383.png||height="726" width="1434"]]
117
118 LHT65N Device：Obtain data based on device type
119
120 [[image:1730857191863-514.png||height="725" width="1433"]]
121
122 === 4.1.2.Page Configuration ===
123
124 ==== 4.1.2.1、Configure the interface of the third layer Davies. ====
125
126 ==== 4.1.2.2、Configure the interface of the second layer asset ====
127
128 ===== 4.1.2.2.1 Equipment distribution diagram： =====
129
130 **Data：**
131
132 [[image:1730770392454-317.png||height="745" width="1439"]]
133
134 **Appearannce：**In this module, we need to arrange our devices in the corresponding positions and use icons to display our devices. Therefore, in the Appearance interface, we need to configure them
135
136 **Tooltip function：**This module displays the current information of the device
137
138 [[image:1730857537965-184.png]]
139
140 {{code language="none"}}
141 var msg = data
142 if(msg.Label=="gateway" && msg.type == "gateway"){
143 var stauts
144 if (msg.gatewaystauts=="true"){
145 stauts = "Connect"
146 }
147 else{
148 stauts = "Disconnected"
149 }
150 var str = "<b>"+msg.entityName+"</b><br/><b>"+stauts+"</b><br/>"
151 return str
152 }
153 else if(msg.type=="gxhl01" && msg.Label!="gateway"){
154 var str = "<b>"+msg.entityName+"</b><br/><b>"+msg.Label+"</b><br/><b>Bat:</b>"+msg.BatV+"V<br/><b>Temperature:</b>"+ msg.TempC_SHT+ "°C<br/><b>Humidity:</b>"+msg.Hum_SHT+"%"
155 return str
156 }
157 else{
158 var str = "<b>"+msg.entityName+"</b><br/><b>"+msg.Label+"</b><br/><b>Bat:</b>"+msg.BatV+"V<br/><b>Temperature:</b>"+ msg.temperature+ "°C<br/><b>Humidity:"+msg.humidity+"%"+"</b><br/>"+
159 "<b>Co2:"+msg.co2+"</b></br><b>Air_Pressure:"+msg.air_pressure
160
161 return str
162 }
163 {{/code}}
164
165 (% class="wikigeneratedid" id="HMarkerimagefunctionFF1A" %)
166 **Marker image function：**This module can display different icons based on different types of sensors and their status to achieve its functionality
167
168 (% class="wikigeneratedid" %)
169 [[image:1730857750749-240.png]]
170
171 {{code language="none"}}
172 var res
173 var msg = data
174 if(msg.Label=="gateway" && msg.type=="gateway"){
175 if (msg.gatewaystauts == "true"){
176 res = {
177 url: images[3],
178 size: 40
179 }
180 }
181 else{
182 res = {
183 url: images[2],
184 size: 40
185 }
186 }}
187 else if(msg.Label!="gateway" && msg.type=="gxhl01" ){
188 if (msg.active=="false"){
189 res = {
190 url: images[1],
191 size: 40
192 }}
193 else{
194 res = {
195 url: images[0],
196 size: 40
197 }
198 }
199 }
200 else if(msg.type=="LWL02"){
201 if (msg.WATER_LEAK_STATUS=="0"){
202 res = {
203 url: images[6],
204 size: 40
205 }}
206 else{
207 res = {
208 url: images[7],
209 size: 40
210 }
211 }
212 }
213 else if(msg.type=="LDS02"){
214 if (msg.DOOR_OPEN_STATUS=="0"){
215 res = {
216 url: images[5],
217 size: 40
218 }}
219 else{
220 res = {
221 url: images[8],
222 size: 40
223 }
224 }
225 }
226 else if(msg.type=="LDS12"){
227 res = {
228 url: images[10],
229 size: 40
230 }}
231 else if(msg.type=="SE01"){
232 res = {
233 url: images[9],
234 size: 40
235 }}
236 else if(msg.type=="PB01"){
237 res = {
238 url: images[11],
239 size: 40
240 }}
241 else if(msg.type=="S31b"){
242 res = {
243 url: images[12],
244 size: 40
245 }}
246 else if(msg.type=="LHT65N"){
247 res = {
248 url: images[13],
249 size: 40
250 }}
251 else{
252 res = {
253 url: images[4],
254 size: 40
255 }
256 }
257 return res;
258 {{/code}}
259
260 (% class="wikigeneratedid" %)
261 [[image:1730770875793-351.png||height="799" width="1474"]]
262
263 (% class="wikigeneratedid" %)
264 **Actions:**We need to implement the function of entering the details interface through the corresponding device icon, so in this module, we need to add actions to achieve redirection
265
266 {{code language="none"}}
267 var entitySubType;
268 var $injector = widgetContext.$scope.$injector;
269 $injector.get(widgetContext.servicesMap.get('entityService')).getEntity(entityId.entityType, entityId.id)
270 .subscribe(function(data) {
271 entitySubType = data.type;
272 console.log(entitySubType)
273 if (entitySubType == 'gateway') {
274 openDashboardStates('gateway_detail');
275 } else if (entitySubType == 'gxhl01') {
276 openDashboardStates('detail');
277 }
278 else if(entitySubType == 'AQS01-dragino-office'){
279 openDashboardStates("aqs01_detail")
280 }
281 else if (entitySubType == 'LDS12') {
282 openDashboardStates('lds12_detail');
283 }
284 else if (entitySubType == 'LDS02') {
285 openDashboardStates('lds02_detail');
286 }
287 else if (entitySubType == 'SE01') {
288 openDashboardStates('se01_detail');
289 }
290 else if (entitySubType == 'PB01') {
291 openDashboardStates('pb01_detail');
292 }
293 else if (entitySubType == 'LWL02') {
294 openDashboardStates('lwl02_detail');
295 }
296 else if (entitySubType == 'LPS8N') {
297 openDashboardStates('lps8n_detail');
298 }
299 else if (entitySubType == 'LHT65N') {
300 openDashboardStates('lht65n_detail');
301 }
302 else if (entitySubType == 'S31b') {
303 openDashboardStates('s31b_detail');
304 }
305 });
306
307 function openDashboardStates(statedId) {
308 var stateParams = widgetContext.stateController.getStateParams();
309 var params = {
310 entityId: entityId,
311 entityName: entityName
312 };
313
314 if (stateParams.city) {
315 params.city = stateParams.city;
316 }
317
318 widgetContext.stateController.openState(statedId, params, false);
319 }
320
321 {{/code}}
322
323 [[image:1730771103096-522.png||height="815" width="1503"]]
324
325 ===== 4.1.2.2.2 Device List =====
326
327 (% class="wikigeneratedid" id="HDataFF1A" %)
328 **Data：**
329
330 [[image:1730771199343-553.png||height="802" width="1501"]]
331
332 **Actions：**Equipment distribution diagram: In this module, functions need to be implemented such as adding devices, editing devices, deleting devices, and jumping to the device details page. Therefore, the following actions need to be added:
333
334 [[image:1730771228766-212.png]]
335
336 (% class="wikigeneratedid" id="HEditdeviceFF1A" %)
337 **Edit device：**Implementation function: Device editing
338
339 [[image:1730771256045-238.png]]
340
341 {{code language="none"}}
342 let $injector = widgetContext.$scope.$injector;
343 let customDialog = $injector.get(widgetContext.servicesMap.get('customDialog'));
344 let deviceService = $injector.get(widgetContext.servicesMap.get('deviceService'));
345 let attributeService = $injector.get(widgetContext.servicesMap.get('attributeService'));
346
347 openEditDeviceDialog();
348
349 function openEditDeviceDialog() {
350 customDialog.customDialog(htmlTemplate, EditDeviceDialogController).subscribe();
351 }
352
353 function EditDeviceDialogController(instance) {
354 let vm = instance;
355
356 vm.device = null;
357 vm.attributes = {};
358
359 vm.editDeviceFormGroup = vm.fb.group({
360 deviceName: ['', [vm.validators.required]],
361 deviceType: ['', [vm.validators.required]],
362 deviceLabel: [''],
363 attributes: vm.fb.group({
364 latitude: [null],
365 longitude: [null]
366 })
367 });
368
369 vm.cancel = function() {
370 vm.dialogRef.close(null);
371 };
372
373 vm.save = function() {
374 vm.editDeviceFormGroup.markAsPristine();
375 if (vm.editDeviceFormGroup.get('deviceType').value !== vm.device.type) {
376 delete vm.device.deviceProfileId;
377 }
378 vm.device.name = vm.editDeviceFormGroup.get('deviceName').value,
379 vm.device.type = vm.editDeviceFormGroup.get('deviceType').value,
380 vm.device.label = vm.editDeviceFormGroup.get('deviceLabel').value
381 deviceService.saveDevice(vm.device).subscribe(
382 function () {
383 saveAttributes().subscribe(
384 function () {
385 widgetContext.updateAliases();
386 vm.dialogRef.close(null);
387 }
388 );
389 }
390 );
391 };
392
393 getEntityInfo();
394
395 function getEntityInfo() {
396 deviceService.getDevice(entityId.id).subscribe(
397 function (device) {
398 attributeService.getEntityAttributes(entityId, 'SERVER_SCOPE',
399 ['latitude', 'longitude']).subscribe(
400 function (attributes) {
401 for (let i = 0; i < attributes.length; i++) {
402 vm.attributes[attributes[i].key] = attributes[i].value;
403 }
404 vm.device = device;
405 vm.editDeviceFormGroup.patchValue(
406 {
407 deviceName: vm.device.name,
408 deviceType: vm.device.type,
409 deviceLabel: vm.device.label,
410 attributes: {
411 latitude: vm.attributes.latitude,
412 longitude: vm.attributes.longitude
413 }
414 }, {emitEvent: false}
415 );
416 }
417 );
418 }
419 );
420 }
421
422 function saveAttributes() {
423 let attributes = vm.editDeviceFormGroup.get('attributes').value;
424 let attributesArray = [];
425 for (let key in attributes) {
426 attributesArray.push({key: key, value: attributes[key]});
427 }
428 if (attributesArray.length > 0) {
429 return attributeService.saveEntityAttributes(entityId, 'SERVER_SCOPE', attributesArray);
430 } else {
431 return widgetContext.rxjs.of([]);
432 }
433 }
434 }
435 {{/code}}
436
437 **Delete device：**Implementation function: Device deletion
438
439 [[image:1730771318657-502.png]]
440
441 {{code language="none"}}
442 let $injector = widgetContext.$scope.$injector;
443 let dialogs = $injector.get(widgetContext.servicesMap.get('dialogs'));
444 let deviceService = $injector.get(widgetContext.servicesMap.get('deviceService'));
445
446 openDeleteDeviceDialog();
447
448 function openDeleteDeviceDialog() {
449 let title = "Are you sure you want to delete the device " + entityName + "?";
450 let content = "Be careful, after the confirmation, the device and all related data will become unrecoverable!";
451 dialogs.confirm(title, content, 'Cancel', 'Delete').subscribe(
452 function (result) {
453 if (result) {
454 deleteDevice();
455 }
456 }
457 );
458 }
459
460 function deleteDevice() {
461 deviceService.deleteDevice(entityId.id).subscribe(
462 function () {
463 widgetContext.updateAliases();
464 }
465 );
466 }
467
468 {{/code}}
469
470 **jump:I**mplementation function: Jump to the device details page
471
472 [[image:1730771386258-676.png]]
473
474 {{code language="none"}}
475 console.log(entityName)
476 var entitySubType;
477 var $injector = widgetContext.$scope.$injector;
478 //console.log($injector)
479 $injector.get(widgetContext.servicesMap.get('entityService')).getEntity(entityId.entityType, entityId.id)
480 .subscribe(function(data) {
481 console.log(data)
482 entitySubType = data.type;
483 console.log(entitySubType)
484 if (entitySubType == 'AQS01-dragino-office') {
485 openDashboardStates('aqs01_detail');
486 }else if (entitySubType == 'gateway') {
487 openDashboardStates('gateway_detail');
488 } else if (entitySubType == 'gxhl01') {
489 openDashboardStates('detail');
490
491 } else if (entitySubType == 'tank-type1') {
492 openDashboardStates('test1');
493 }
494 else if (entitySubType == 'LDS12') {
495 openDashboardStates('lds12_detail');
496 }
497 else if (entitySubType == 'LDS02') {
498 openDashboardStates('lds02_detail');
499 }
500 else if (entitySubType == 'SE01') {
501 openDashboardStates('se01_detail');
502 }
503 else if (entitySubType == 'PB01') {
504 openDashboardStates('pb01_detail');
505 }
506 else if (entitySubType == 'LWL02') {
507 openDashboardStates('lwl02_detail');
508 }
509 else if (entitySubType == 'LPS8N') {
510 openDashboardStates('lps8n_detail');
511 }
512 else if (entitySubType == 'LHT65N') {
513 openDashboardStates('lht65n_detail');
514 }
515 else if (entitySubType == 'S31b') {
516 openDashboardStates('s31b_detail');
517 }
518 });
519
520 function openDashboardStates(statedId) {
521 var stateParams = widgetContext.stateController.getStateParams();
522 //console.log(stateParams)
523 var params = {
524 entityId: entityId,
525 entityName: entityName
526 };
527 widgetContext.stateController.updateState(statedId, params, false);
528 }
529 {{/code}}
530
531 (% class="wikigeneratedid" id="H-1" %)
532 **Add device：**Implementation function: Add device
533
534 [[image:1730771441589-122.png]]
535
536 {{code language="none"}}
537 let $injector = widgetContext.$scope.$injector;
538 let customDialog = $injector.get(widgetContext.servicesMap.get('customDialog'));
539 let deviceService = $injector.get(widgetContext.servicesMap.get('deviceService'));
540 let attributeService = $injector.get(widgetContext.servicesMap.get('attributeService'));
541
542 openAddDeviceDialog();
543
544 function openAddDeviceDialog() {
545 customDialog.customDialog(htmlTemplate, AddDeviceDialogController).subscribe();
546 }
547
548 function AddDeviceDialogController(instance) {
549 let vm = instance;
550
551 vm.addDeviceFormGroup = vm.fb.group({
552 deviceName: ['', [vm.validators.required]],
553 deviceType: ['', [vm.validators.required]],
554 deviceLabel: [''],
555 attributes: vm.fb.group({
556 latitude: [null],
557 longitude: [null]
558 })
559 });
560
561 vm.cancel = function() {
562 vm.dialogRef.close(null);
563 };
564
565 vm.save = function() {
566 vm.addDeviceFormGroup.markAsPristine();
567 let device = {
568 name: vm.addDeviceFormGroup.get('deviceName').value,
569 type: vm.addDeviceFormGroup.get('deviceType').value,
570 label: vm.addDeviceFormGroup.get('deviceLabel').value
571 };
572 deviceService.saveDevice(device).subscribe(
573 function (device) {
574 saveAttributes(device.id).subscribe(
575 function () {
576 widgetContext.updateAliases();
577 vm.dialogRef.close(null);
578 }
579 );
580 }
581 );
582 };
583
584 function saveAttributes(entityId) {
585 let attributes = vm.addDeviceFormGroup.get('attributes').value;
586 let attributesArray = [];
587 for (let key in attributes) {
588 attributesArray.push({key: key, value: attributes[key]});
589 }
590 if (attributesArray.length > 0) {
591 return attributeService.saveEntityAttributes(entityId, "SERVER_SCOPE", attributesArray);
592 } else {
593 return widgetContext.rxjs.of([]);
594 }
595 }
596 }
597 {{/code}}
598
599 ==== ====
600
601 ===== 4.1.2.2.3 Asset Alarm: =====
602
603
604 {{code language="none"}}
605 var params = widgetContext.stateController.getStateParams();
606 var selectedSupermarket = params['selectedSupermarket'];
607 if (selectedSupermarket && selectedSupermarket.entityId.id === entityId.id) {
608 params['selectedSupermarket'] = null;
609 } else {
610 params['selectedSupermarket'] = { entityId: entityId, entityName: entityName, entityLabel: entityLabel };
611 }
612 widgetContext.stateController.updateState(null, params);
613 {{/code}}
614
615 [[image:1730710875401-848.png||height="767" width="1429"]]
616
617 **Supermarket_detail:**Implementation function: Jump to the asset details page
618
619 {{code language="none"}}
620 var params = JSON.parse(JSON.stringify(widgetContext.stateController.getStateParams()));
621 params['selectedSupermarket'] = {
622 entityId: entityId,
623 entityName: entityName,
624 entityLabel: entityLabel,
625 };
626 params['targetEntityParamName'] = 'selectedSupermarket';
627 params['selectedDevice'] = null;
628
629 widgetContext.stateController.openState('svgmap', params);
630 {{/code}}
631
632 [[image:1730710990334-601.png||height="772" width="1433"]]
633
634 * (((
635 In this demo, exclusive map icons were set as follows:
636 )))
637
638 {{code language="none"}}
639 var res = {
640 url: images[0],
641 size: 66
642 };
643 return res;
644 {{/code}}
645
646 [[image:1730710395303-672.png||height="771" width="1438"]]
647
648 ===== 4.1.2.3.2 Asset List: =====
649
650 **Data:**
651
652 [[image:1730710693066-349.png||height="772" width="1439"]]
653
654 **Actions:**The Assets List interface has an action, which is the same as the Supermarket_details in the Map. You can jump to the second level entity interface to view the details of the selected location based on its location
655
656 [[image:1730712335338-750.png||height="751" width="1423"]]
657
658 [[image:1730712473941-913.png||height="781" width="1422"]]
659
660 ===== 4.1.2.3.3 All Alarms: =====
661
662 [[image:1730712539209-554.png||height="764" width="1424"]]
663
664 == 4.2 Alarm configuration details ==
665
666 === 4.2.1 High temperature ===
667
668 Creat:
669
670 [[image:1730862483514-101.png||height="750" width="1407"]]
671
672 Clear:
673
674 [[image:1730862584519-902.png||height="758" width="1404"]]
675
676 === 4.2.2 Low Temperature ===
677
678 Creat:
679
680 [[image:1730863708259-750.png||height="752" width="1403"]]
681
682 Clear:
683
684 [[image:1730863750414-979.png||height="746" width="1403"]]
685
686 === 4.2.3 High humidity ===
687
688 Creat:
689
690 [[image:1730864045747-876.png||height="752" width="1396"]]
691
692 Clear:
693
694 [[image:1730864077395-395.png||height="735" width="1393"]]
695
696 === 4.2.4 Low humidity ===
697
698 Creat：
699
700 [[image:1730864117808-484.png||height="741" width="1392"]]
701
702 Clear：
703
704 [[image:1730864159071-895.png||height="745" width="1392"]]
705
706 === 4.2.5 Low voltage ===
707
708 Creat：
709
710 [[image:1730864207037-477.png||height="740" width="1388"]]
711
712 Clear：
713
714 [[image:1730864250506-111.png||height="735" width="1389"]]
715
716 === 4.2.6 Device Disconnected ===
717
718 Creat：
719
720 [[image:1730864293216-991.png||height="739" width="1387"]]
721
722 Clear：
723
724 [[image:1730864331859-740.png||height="735" width="1385"]]
725
726 == 4.3 Rule chain configuration details ==
727
728 [[image:1730864784118-474.png]]
729
730 **Script：**Email configuration for sending device alarm information
731
732 [[image:1730864676542-406.png||height="732" width="1384"]]
733
734 {{code language="none"}}
735 function locatime(timenumber){
736 var date = new Date(timenumber)
737 return date.toLocaleDateString() + ' ' + date.toLocaleTimeString()
738 }
739 var name = msg.name
740 var devicename = msg.originatorName
741 var label = msg.originatorLabel
742 var status = msg.status
743 var detaildata =JSON.parse(msg.details.data)
744 var tempswitch
745
746 if (name != "Device Disconnected") {
747 //detaildata=JSON.parse(msg.details.data)
748 if (detaildata.Temperature_alarm_switch == true) {
749 tempswitch = "open"
750 } else {
751 tempswitch = "close"
752 }
753 var humswitch
754 if (detaildata.Humidity_alarm_switch == true) {
755 humswitch = "open"
756 } else {
757 humswitch = "close"
758 }
759 var batswitch
760 if (detaildata.Voltage_alarm_switch == true) {
761 batswitch = "open"
762 } else {
763 batswitch = "close"
764 }
765 var str2 = "<p>-- Temperature alarm switch status: " +
766 tempswitch + "</p>" +
767 "<p>-- Humidity alarm switch status: " + humswitch +
768 "</p>" +
769 "<p>-- Voltage alarm switch status: " + batswitch
770 }
771
772 if (name == "High Temperature" && status ==
773 "ACTIVE_UNACK") {
774 var emailstr =
775 "<div><p><span style='color: black; font-weight: bold'>" +
776 "Device " + label + " has alarm:</span></p>" +
777 "<p><span style='color: red; font-weight: bold'>-- High Temperature Alarm</span></p>" +
778 "<p>-- Current Temperature : " + detaildata
779 .TempC_SHT + "</p><br>" +
780 "<p>Device Configure:</p>" +
781 "<p>-- Temperature Threshold : min: " + detaildata
782 .Low_temperature_alarm + ", max: " + detaildata
783 .High_temperature_alarm + "</p>" +
784 "<p>-- Humidity Threshold: min: " + detaildata
785 .Low_humidity_alarm + ", max:" + detaildata
786 .High_humidity_alarm + "</p>" +
787 "<p>-- Battery threshold: min: " + detaildata
788 .Low_voltage_alarm + "</p>" + str2 + "</div>"
789 return {
790 msg: {
791 "data": emailstr
792 },
793 metadata: metadata,
794 msgType: msgType
795 };
796 } else if (name == "Low Temperature" && status ==
797 "ACTIVE_UNACK") {
798 var emailstr =
799 "<div><p><span style='color: black; font-weight: bold'>" +
800 "Device " + label + " has alarm:</span></p>" +
801 "<p><span style='color: red; font-weight: bold'>-- Low Temperature Alarm</span></p>" +
802 "<p>-- Current Temperature : " + detaildata
803 .TempC_SHT + "</p><br>" +
804 "<p>Device Configure:</p>" +
805 "<p>-- Temperature Threshold : min: " + detaildata
806 .Low_temperature_alarm + ", max: " + detaildata
807 .High_temperature_alarm + "</p>" +
808 "<p>-- Humidity Threshold: min: " + detaildata
809 .Low_humidity_alarm + ", max:" + detaildata
810 .High_humidity_alarm + "</p>" +
811 "<p>-- Battery threshold: min: " + detaildata
812 .Low_voltage_alarm + "</p>" + str2 + "</div>"
813
814 return {
815 msg: {
816 "data": emailstr
817 },
818 metadata: metadata,
819 msgType: msgType
820 };
821
822 } else if (name == "Device Disconnected" && status ==
823 "ACTIVE_UNACK") {
824 var time1 = locatime(Number(detaildata.lastActivityTime))
825 //var time1 = detaildata.lastActivityTime
826 // var chazhi = parseInt((detaildata.inactivityAlarmTime-detaildata.lastActivityTime)/1000/60)
827 // var emailstr =
828 // "<div><p><span style='color: red; font-weight: bold'>" +
829 // "Device " + label + " has Alarm</span></p><p>Last activity time: "+time1+"</p><p>Last Uplink: 21"+"minutes ago</p></div>"
830
831 var emailstr ="Device " + label + " has Alarm##Last activity time: "+time1+"##Last Uplink: 21minutes ago"
832 var newType = "POST_TELEMETRY_REQUEST"
833 return {
834 msg:emailstr,
835 metadata: metadata,
836 msgType: newType
837 }
838 } else if (name == "High humidity" && status ==
839 "ACTIVE_UNACK") {
840 var emailstr =
841 "<div><p><span style='color: black; font-weight: bold'>" +
842 "Device " + label + " has alarm:</span></p>" +
843 "<p><span style='color: red; font-weight: bold'>-- High Humidity Alarm</span></p>" +
844 "<p>-- Current Temperature : " + detaildata
845 .Hum_SHT + "</p><br>" +
846 "<p>Device Configure:</p>" +
847 "<p>-- Temperature Threshold : min: " + detaildata
848 .Low_temperature_alarm + ", max: " + detaildata
849 .High_temperature_alarm + "</p>" +
850 "<p>-- Humidity Threshold: min: " + detaildata
851 .Low_humidity_alarm + ", max:" + detaildata
852 .High_humidity_alarm + "</p>" +
853 "<p>-- Battery threshold: min: " + detaildata
854 .Low_voltage_alarm + "</p>" + str2 + "</div>"
855
856 return {
857 msg: {
858 "data": emailstr
859 },
860 metadata: metadata,
861 msgType: msgType
862 };
863 } else if (name == "Low humidity" && status ==
864 "ACTIVE_UNACK") {
865 var emailstr =
866 "<div><p><span style='color: black; font-weight: bold'>" +
867 "Device " + label + " has alarm:</span></p>" +
868 "<p><span style='color: red; font-weight: bold'>-- Low Humidity Alarm</span></p>" +
869 "<p>-- Current Temperature : " + detaildata
870 .Hum_SHT + "</p><br>" +
871 "<p>Device Configure:</p>" +
872 "<p>-- Temperature Threshold : min: " + detaildata
873 .Low_temperature_alarm + ", max: " + detaildata
874 .High_temperature_alarm + "</p>" +
875 "<p>-- Humidity Threshold: min: " + detaildata
876 .Low_humidity_alarm + ", max:" + detaildata
877 .High_humidity_alarm + "</p>" +
878 "<p>-- Battery threshold: min: " + detaildata
879 .Low_voltage_alarm + "</p>" + str2 + "</div>"
880
881 return {
882 msg: {
883 "data": emailstr
884 },
885 metadata: metadata,
886 msgType: msgType
887 };
888 } else if (name == "Low voltage" && status ==
889 "ACTIVE_UNACK") {
890 var emailstr =
891 "<div><p><span style='color: black; font-weight: bold'>" +
892 "Device " + label + " has alarm:</span></p>" +
893 "<p><span style='color: red; font-weight: bold'>-- Low Voltage Alarm</span></p>" +
894 "<p>-- Current Temperature : " + detaildata.BatV +
895 "</p><br>" +
896 "<p>Device Configure:</p>" +
897 "<p>-- Temperature Threshold : min: " + detaildata
898 .Low_temperature_alarm + ", max: " + detaildata
899 .High_temperature_alarm + "</p>" +
900 "<p>-- Humidity Threshold: min: " + detaildata
901 .Low_humidity_alarm + ", max:" + detaildata
902 .High_humidity_alarm + "</p>" +
903 "<p>-- Battery threshold: min: " + detaildata
904 .Low_voltage_alarm + "</p>" + str2 + "</div>"
905
906 return {
907 msg: {
908 "data": emailstr
909 },
910 metadata: metadata,
911 msgType: msgType
912 };
913 } else if (name == "High Temperature" && status ==
914 "CLEARED_UNACK") {
915 var emailstr =
916 "<div><p><span style='color: green; font-weight: bold'>Device " +
917 label +
918 " High Temperature Alarm Cleared</span></p>" +
919 "<p>-- Current Temperature : " + detaildata
920 .TempC_SHT + "</p><br>" +
921 "<p>Device Configure:</p>" +
922 "<p>-- Temperature Threshold : min: " + detaildata
923 .Low_temperature_alarm + ", max: " + detaildata
924 .High_temperature_alarm + "</p>" +
925 "<p>-- Humidity Threshold: min: " + detaildata
926 .Low_humidity_alarm + ", max:" + detaildata
927 .High_humidity_alarm + "</p>" +
928 "<p>-- Battery threshold: min: " + detaildata
929 .Low_voltage_alarm + "</p>" + str2 + "</div>"
930
931 return {
932 msg: {
933 "data": emailstr
934 },
935 metadata: metadata,
936 msgType: msgType
937 };
938 } else if (name == "Low Temperature" && status ==
939 "CLEARED_UNACK") {
940 var emailstr =
941 "<div><p><span style='color: green; font-weight: bold'>Device " +
942 label +
943 " Low Temperature Alarm Cleared</span></p>" +
944 "<p>-- Current Temperature : " + detaildata
945 .TempC_SHT + "</p><br>" +
946 "<p>Device Configure:</p>" +
947 "<p>-- Temperature Threshold : min: " + detaildata
948 .Low_temperature_alarm + ", max: " + detaildata
949 .High_temperature_alarm + "</p>" +
950 "<p>-- Humidity Threshold: min: " + detaildata
951 .Low_humidity_alarm + ", max:" + detaildata
952 .High_humidity_alarm + "</p>" +
953 "<p>-- Battery threshold: min: " + detaildata
954 .Low_voltage_alarm + "</p>" + str2 + "</div>"
955
956 return {
957 msg: {
958 "data": emailstr
959 },
960 metadata: metadata,
961 msgType: msgType
962 };
963 } else if (name == "High humidity" && status ==
964 "CLEARED_UNACK") {
965 var emailstr =
966 "<div><p><span style='color: green; font-weight: bold'>Device " +
967 label + " High Humidity Alarm Cleared</span></p>" +
968 "<p>-- Current Temperature : " + detaildata
969 .Hum_SHT + "</p><br>" +
970 "<p>Device Configure:</p>" +
971 "<p>-- Temperature Threshold : min: " + detaildata
972 .Low_temperature_alarm + ", max: " + detaildata
973 .High_temperature_alarm + "</p>" +
974 "<p>-- Humidity Threshold: min: " + detaildata
975 .Low_humidity_alarm + ", max:" + detaildata
976 .High_humidity_alarm + "</p>" +
977 "<p>-- Battery threshold: min: " + detaildata
978 .Low_voltage_alarm + "</p>" + str2 + "</div>"
979
980 return {
981 msg: {
982 "data": emailstr
983 },
984 metadata: metadata,
985 msgType: msgType
986 };
987 } else if (name == "Low humidity" && status ==
988 "CLEARED_UNACK") {
989 var emailstr =
990 "<div><p><span style='color: green; font-weight: bold'>Device " +
991 label + " Low Humidity Alarm Cleared</span></p>" +
992 "<p>-- Current Temperature : " + detaildata
993 .Hum_SHT + "</p><br>" +
994 "<p>Device Configure:</p>" +
995 "<p>-- Temperature Threshold : min: " + detaildata
996 .Low_temperature_alarm + ", max: " + detaildata
997 .High_temperature_alarm + "</p>" +
998 "<p>-- Humidity Threshold: min: " + detaildata
999 .Low_humidity_alarm + ", max:" + detaildata
1000 .High_humidity_alarm + "</p>" +
1001 "<p>-- Battery threshold: min: " + detaildata
1002 .Low_voltage_alarm + "</p>" + str2 + "</div>"
1003 return {
1004 msg: {
1005 "data": emailstr
1006 },
1007 metadata: metadata,
1008 msgType: msgType
1009 };
1010 } else if (name == "Low voltage" && status ==
1011 "CLEARED_UNACK") {
1012
1013 var emailstr =
1014 "<div><p><span style='color: green; font-weight: bold'>Device " +
1015 label + " Low Voltage Alarm Cleared</span></p>" +
1016 "<p>-- Current Temperature : " + detaildata.BatV +
1017 "</p><br><br>" +
1018 "<p>Device Configure:</p>" +
1019 "<p>-- Temperature Threshold : min: " + detaildata
1020 .Low_temperature_alarm + ", max: " + detaildata
1021 .High_temperature_alarm + "</p>" +
1022 "<p>-- Humidity Threshold: min: " + detaildata
1023 .Low_humidity_alarm + ", max:" + detaildata
1024 .High_humidity_alarm + "</p>" +
1025 "<p>-- Battery threshold: min: " + detaildata
1026 .Low_voltage_alarm + "</p>" + str2 + "</div>"
1027
1028 return {
1029 msg: {
1030 "data": emailstr
1031 },
1032 metadata: metadata,
1033 msgType: msgType
1034 };
1035 } else if (name == "Device Disconnected" && status ==
1036 "CLEARED_UNACK") {
1037 var time1 = locatime(Number(detaildata.lastActivityTime))
1038 //var time1 = detaildata.lastActivityTime
1039 // var chazhi = parseInt((detaildata.inactivityAlarmTime-detaildata.lastActivityTime)/1000/60)
1040 // var emailstr =
1041 // "<div><p><span style='color: green; font-weight: bold'>" +
1042 // "Device " + label + " has Alarm Cleared</span></p><p>Last activity time: "+time1+"</p></div>"
1043 var emailstr ="Device " + label + " has Alarm Cleared##Last activity time: "+time1
1044 var newType = "POST_TELEMETRY_REQUEST"
1045 return {
1046 msg: emailstr,
1047 metadata: metadata,
1048 msgType: newType
1049 }
1050 }
1051 {{/code}}
1052
1053 (% class="wikigeneratedid" %)
1054 **Generate Report：**
1055
1056 (% class="wikigeneratedid" %)
1057 [[image:1730865053380-293.png]]
1058
1059 = 5.other =
1060
1061 * If you want to create a similar dashboard, after understanding the case, you can download and import the dashboard, device profiles, rule chains, etc. of the case on GitHub, and make modifications based on them.
1062 * GitHub address：[[https:~~/~~/github.com/ThingsEye-io/te-platform/tree/main/case/Dragino%20Office%20%26%20Factory>>https://github.com/ThingsEye-io/te-platform/tree/main/case/Dragino%20Office%20%26%20Factory]]