Wiki source code of Demo for Smart Office, Factory

Version 6.1 by Chxy on 2024/10/16 11:08
Show last authors
1 = 1. About this demo =
2
3 This demo is to show the installation for various sensors in Dragino Office, Dragino Facotry & ThingsEye Office. It covers various types of sensors such as Temperature, Humidity, CO2, Water Flow, Vibration & many many.
4
5 User can check this [[Public Share Link>>https://thingseye.io/dashboard/d17f70f0-6b5f-11ef-a329-6fb88c149adb?publicId=33180810-5c40-11ef-a329-6fb88c149adb ]] and see the dash board for this demo. The dash board keeps updating, while the main structure will keep the same. It has **Three Level DashBoard **as decribe below.
6
7 * **First Level - Overview for all branches**: This dashboard shows all branches overview status and location.
8 * **Second Level - Branch Level**: This dashboard shows all sensors installation and status in the selected branch.
9 * **Third Level - Sensor Level**: This dashboard shows the detail reading for a specify sensor
10
11 [[image:Level1.png||height="133" width="298"]] [[image:Arrow.png||height="27" width="51"]] [[image:Level2.png||height="134" width="264"]][[image:Arrow.png||height="27" width="51"]] [[image:2024-09-26 23-47-06.png||height="130" width="256"]]
12
13
14 The rest of this chapter will provide the introduction for how to set up similiar solution.
15
16
17 = 2. Set up a similiar dashboard =
18
19 == 2.1 Add a branch ==
20
21
22 == 2.2 Connect Sensors ==
23
24 === 2.2.1 Add LoRaWAN Sensors ===
25
26 === 2.2.2 Add NB-IoT Sensors ===
27
28
29
30 == 2.3 Set up Alarm ==
31
32
33
34 = 3. More features =
35
36