Wiki source code of Demo for Smart Office, Factory

Version 60.1 by Hera Guo on 2024/11/07 10:21
Show last authors
1 **Table of Contents:**
2
3 {{toc/}}
4
5
6
7
8
9
10
11 = 1. About this demo =
12
13 This demo is to show the installation for various sensors in Dragino Office, Dragino Facotry & ThingsEye Office. It covers various types of sensors such as Temperature, Humidity, CO2, Water Flow, Vibration & many many.
14
15 User can check this [[Public Share Link>>https://thingseye.io/dashboard/d17f70f0-6b5f-11ef-a329-6fb88c149adb?publicId=33180810-5c40-11ef-a329-6fb88c149adb ]] and see the dash board for this demo. The dash board keeps updating, while the main structure will keep the same. It has **Three Level DashBoard **as decribe below.
16
17 * **First Level - Overview for all branches**: This dashboard shows all branches overview status and location.
18 * **Second Level - Branch Level**: This dashboard shows all sensors installation and status in the selected branch.
19 * **Third Level - Sensor Level**: This dashboard shows the detail reading for a specify sensor
20
21 [[image:Level1.png||height="133" width="298"]] [[image:Arrow.png||height="27" width="51"]] [[image:Level2.png||height="134" width="264"]][[image:Arrow.png||height="27" width="51"]] [[image:2024-09-26 23-47-06.png||height="130" width="256"]]
22
23
24 The rest of this chapter will provide the introduction for how to set up similiar solution.
25
26
27 = 2.Basic configuration instructions =
28
29 When you start a complex IoT project, you first need to learn some basic configuration methods for ThingsEye.
30
31 Here are some instructions you need to know：
32
33 Dashboard creation and some basic configurations:[[https:~~/~~/wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20import%20and%20use%20the%20dashboard%3F/#H3.2.2.1CreatA0alarm>>https://wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20import%20and%20use%20the%20dashboard%3F/#H3.2.2.1CreatA0alarm]]
34
35 Rule chain creation:[[https:~~/~~/wiki.thingseye.io/xwiki/bin/view/Main/Basic%20configuration%20of%20rule%20chains>>https://wiki.thingseye.io/xwiki/bin/view/Main/Basic%20configuration%20of%20rule%20chains/]]
36
37 Devices connected to thingseye：[[https:~~/~~/wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20connect%20my%20devices%20to%20ThingsEye%3F/>>https://wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20connect%20my%20devices%20to%20ThingsEye%3F/]]
38
39 = 3.overview =
40
41 == 3.1 MHierarchical architectureore features ==
42
43 Before we start a project, we first need to understand the organizational structure of the project. Only with a clear outline can our project construction process be smoother
44
45 **Assets：**Dragino Office  、Dragino Factory
46
47 **Devices：**
48
49 Dragino Factory：temperature and humidity measurement×7、Gateway×1
50
51 Dragino Office：temperature and humidity measurement×2、Air quality measurement×4
52
53 == 3.2 Dashboard architecture ==
54
55 In this demo, the dashboard is divided into three layers, namely: home page, asset, and device.
56
57 **home page:**It includes three parts: map, asset list, and all alarm. From this interface, you can see how many factories, offices, and so on there are
58
59 **asset:**It includes three parts: asset map, device list, and asset alarm. From this interface, you can see how many sensors are deployed in the office or project, where they are located, and their alarm status
60
61 **device:**This section displays the specific information collected by the device, and different types of sensors have different display interfaces
62
63 [[image:屏幕截图 2024-11-04 134645.png]]
64
65 First floor：
66
67 [[image:1730702565889-204.png||height="771" width="1445"]]
68
69 Second floor：
70
71 [[image:1730702622551-808.png||height="756" width="1450"]]
72
73 Third floor：
74
75 [[image:1730702656725-496.png||height="775" width="1455"]]
76
77 [[image:1730702814435-805.png||height="797" width="1458"]]
78
79
80 [[image:1730702688377-367.png||height="770" width="1462"]]
81
82 * How many types of devices do you need, how many layers of third level dashboards you need to create.
83
84 == 3.3 Alarm rules ==
85
86 High Temperature、Low Temperature、High humidity、Low humidity、Low voltage、Device Disconnected
87
88 [[image:屏幕截图 2024-11-04 135045.png]]
89
90 = 4.configuration details =
91
92 After understanding the architecture and layering of the complete project, we can start configuring it
93
94 == 4.1 Dashboard configuration details ==
95
96 === 4.1.1.Data source (Entity aliases) ===
97
98 detail:Obtain data based on dashboard status
99
100 [[image:1730709424998-915.png||height="729" width="1436"]]
101
102 Alarm:Obtain alarm information
103
104 [[image:1730709479828-595.png||height="696" width="1435"]]
105
106 Dragino&GXHL,Ltd:Obtain data through asset types
107
108 [[image:1730709511861-439.png||height="714" width="1435"]]
109
110 Selected Supermarket:Retrieve devices by device type
111
112 [[image:1730709527720-418.png||height="751" width="1433"]]
113
114 Supermarket Devices:Obtain data through device type
115
116 [[image:1730709555797-383.png||height="726" width="1434"]]
117
118 LHT65N Device：Obtain data based on device type
119
120 [[image:1730857191863-514.png||height="725" width="1433"]]
121
122 === 4.1.2.Page Configuration ===
123
124 ==== 4.1.2.1、Configure the interface of the third layer Davies. ====
125
126 ==== 4.1.2.2、Configure the interface of the second layer asset ====
127
128 ===== 4.1.2.2.1 Equipment distribution diagram： =====
129
130 **Data：**
131
132 [[image:1730770392454-317.png||height="745" width="1439"]]
133
134 **Appearannce：**In this module, we need to arrange our devices in the corresponding positions and use icons to display our devices. Therefore, in the Appearance interface, we need to configure them
135
136 **Tooltip function：**This module displays the current information of the device
137
138 [[image:1730857537965-184.png]]
139
140 {{code language="none"}}
141 var msg = data
142 if(msg.Label=="gateway" && msg.type == "gateway"){
143 var stauts
144 if (msg.gatewaystauts=="true"){
145 stauts = "Connect"
146 }
147 else{
148 stauts = "Disconnected"
149 }
150 var str = "<b>"+msg.entityName+"</b><br/><b>"+stauts+"</b><br/>"
151 return str
152 }
153 else if(msg.type=="gxhl01" && msg.Label!="gateway"){
154 var str = "<b>"+msg.entityName+"</b><br/><b>"+msg.Label+"</b><br/><b>Bat:</b>"+msg.BatV+"V<br/><b>Temperature:</b>"+ msg.TempC_SHT+ "°C<br/><b>Humidity:</b>"+msg.Hum_SHT+"%"
155 return str
156 }
157 else{
158 var str = "<b>"+msg.entityName+"</b><br/><b>"+msg.Label+"</b><br/><b>Bat:</b>"+msg.BatV+"V<br/><b>Temperature:</b>"+ msg.temperature+ "°C<br/><b>Humidity:"+msg.humidity+"%"+"</b><br/>"+
159 "<b>Co2:"+msg.co2+"</b></br><b>Air_Pressure:"+msg.air_pressure
160
161 return str
162 }
163 {{/code}}
164
165 (% class="wikigeneratedid" id="HMarkerimagefunctionFF1A" %)
166 **Marker image function：**This module can display different icons based on different types of sensors and their status to achieve its functionality
167
168 (% class="wikigeneratedid" %)
169 [[image:1730857750749-240.png]]
170
171 {{code language="none"}}
172 var res
173 var msg = data
174 if(msg.Label=="gateway" && msg.type=="gateway"){
175 if (msg.gatewaystauts == "true"){
176 res = {
177 url: images[3],
178 size: 40
179 }
180 }
181 else{
182 res = {
183 url: images[2],
184 size: 40
185 }
186 }}
187 else if(msg.Label!="gateway" && msg.type=="gxhl01" ){
188 if (msg.active=="false"){
189 res = {
190 url: images[1],
191 size: 40
192 }}
193 else{
194 res = {
195 url: images[0],
196 size: 40
197 }
198 }
199 }
200 else if(msg.type=="LWL02"){
201 if (msg.WATER_LEAK_STATUS=="0"){
202 res = {
203 url: images[6],
204 size: 40
205 }}
206 else{
207 res = {
208 url: images[7],
209 size: 40
210 }
211 }
212 }
213 else if(msg.type=="LDS02"){
214 if (msg.DOOR_OPEN_STATUS=="0"){
215 res = {
216 url: images[5],
217 size: 40
218 }}
219 else{
220 res = {
221 url: images[8],
222 size: 40
223 }
224 }
225 }
226 else if(msg.type=="LDS12"){
227 res = {
228 url: images[10],
229 size: 40
230 }}
231 else if(msg.type=="SE01"){
232 res = {
233 url: images[9],
234 size: 40
235 }}
236 else if(msg.type=="PB01"){
237 res = {
238 url: images[11],
239 size: 40
240 }}
241 else if(msg.type=="S31b"){
242 res = {
243 url: images[12],
244 size: 40
245 }}
246 else if(msg.type=="LHT65N"){
247 res = {
248 url: images[13],
249 size: 40
250 }}
251 else{
252 res = {
253 url: images[4],
254 size: 40
255 }
256 }
257 return res;
258 {{/code}}
259
260 (% class="wikigeneratedid" %)
261 [[image:1730770875793-351.png||height="799" width="1474"]]
262
263 (% class="wikigeneratedid" %)
264 **Actions:**We need to implement the function of entering the details interface through the corresponding device icon, so in this module, we need to add actions to achieve redirection
265
266 {{code language="none"}}
267 var entitySubType;
268 var $injector = widgetContext.$scope.$injector;
269 $injector.get(widgetContext.servicesMap.get('entityService')).getEntity(entityId.entityType, entityId.id)
270 .subscribe(function(data) {
271 entitySubType = data.type;
272 console.log(entitySubType)
273 if (entitySubType == 'gateway') {
274 openDashboardStates('gateway_detail');
275 } else if (entitySubType == 'gxhl01') {
276 openDashboardStates('detail');
277 }
278 else if(entitySubType == 'AQS01-dragino-office'){
279 openDashboardStates("aqs01_detail")
280 }
281 else if (entitySubType == 'LDS12') {
282 openDashboardStates('lds12_detail');
283 }
284 else if (entitySubType == 'LDS02') {
285 openDashboardStates('lds02_detail');
286 }
287 else if (entitySubType == 'SE01') {
288 openDashboardStates('se01_detail');
289 }
290 else if (entitySubType == 'PB01') {
291 openDashboardStates('pb01_detail');
292 }
293 else if (entitySubType == 'LWL02') {
294 openDashboardStates('lwl02_detail');
295 }
296 else if (entitySubType == 'LPS8N') {
297 openDashboardStates('lps8n_detail');
298 }
299 else if (entitySubType == 'LHT65N') {
300 openDashboardStates('lht65n_detail');
301 }
302 else if (entitySubType == 'S31b') {
303 openDashboardStates('s31b_detail');
304 }
305 });
306
307 function openDashboardStates(statedId) {
308 var stateParams = widgetContext.stateController.getStateParams();
309 var params = {
310 entityId: entityId,
311 entityName: entityName
312 };
313
314 if (stateParams.city) {
315 params.city = stateParams.city;
316 }
317
318 widgetContext.stateController.openState(statedId, params, false);
319 }
320
321 {{/code}}
322
323 [[image:1730771103096-522.png||height="815" width="1503"]]
324
325 ===== 4.1.2.2.2 Device List =====
326
327 (% class="wikigeneratedid" id="HDataFF1A" %)
328 **Data：**
329
330 [[image:1730771199343-553.png||height="802" width="1501"]]
331
332 **Actions：**Equipment distribution diagram: In this module, functions need to be implemented such as adding devices, editing devices, deleting devices, and jumping to the device details page. Therefore, the following actions need to be added:
333
334 [[image:1730771228766-212.png]]
335
336 (% class="wikigeneratedid" id="HEditdeviceFF1A" %)
337 **Edit device：**Implementation function: Device editing
338
339 [[image:1730771256045-238.png]]
340
341 {{code language="none"}}
342 let $injector = widgetContext.$scope.$injector;
343 let customDialog = $injector.get(widgetContext.servicesMap.get('customDialog'));
344 let deviceService = $injector.get(widgetContext.servicesMap.get('deviceService'));
345 let attributeService = $injector.get(widgetContext.servicesMap.get('attributeService'));
346
347 openEditDeviceDialog();
348
349 function openEditDeviceDialog() {
350 customDialog.customDialog(htmlTemplate, EditDeviceDialogController).subscribe();
351 }
352
353 function EditDeviceDialogController(instance) {
354 let vm = instance;
355
356 vm.device = null;
357 vm.attributes = {};
358
359 vm.editDeviceFormGroup = vm.fb.group({
360 deviceName: ['', [vm.validators.required]],
361 deviceType: ['', [vm.validators.required]],
362 deviceLabel: [''],
363 attributes: vm.fb.group({
364 latitude: [null],
365 longitude: [null]
366 })
367 });
368
369 vm.cancel = function() {
370 vm.dialogRef.close(null);
371 };
372
373 vm.save = function() {
374 vm.editDeviceFormGroup.markAsPristine();
375 if (vm.editDeviceFormGroup.get('deviceType').value !== vm.device.type) {
376 delete vm.device.deviceProfileId;
377 }
378 vm.device.name = vm.editDeviceFormGroup.get('deviceName').value,
379 vm.device.type = vm.editDeviceFormGroup.get('deviceType').value,
380 vm.device.label = vm.editDeviceFormGroup.get('deviceLabel').value
381 deviceService.saveDevice(vm.device).subscribe(
382 function () {
383 saveAttributes().subscribe(
384 function () {
385 widgetContext.updateAliases();
386 vm.dialogRef.close(null);
387 }
388 );
389 }
390 );
391 };
392
393 getEntityInfo();
394
395 function getEntityInfo() {
396 deviceService.getDevice(entityId.id).subscribe(
397 function (device) {
398 attributeService.getEntityAttributes(entityId, 'SERVER_SCOPE',
399 ['latitude', 'longitude']).subscribe(
400 function (attributes) {
401 for (let i = 0; i < attributes.length; i++) {
402 vm.attributes[attributes[i].key] = attributes[i].value;
403 }
404 vm.device = device;
405 vm.editDeviceFormGroup.patchValue(
406 {
407 deviceName: vm.device.name,
408 deviceType: vm.device.type,
409 deviceLabel: vm.device.label,
410 attributes: {
411 latitude: vm.attributes.latitude,
412 longitude: vm.attributes.longitude
413 }
414 }, {emitEvent: false}
415 );
416 }
417 );
418 }
419 );
420 }
421
422 function saveAttributes() {
423 let attributes = vm.editDeviceFormGroup.get('attributes').value;
424 let attributesArray = [];
425 for (let key in attributes) {
426 attributesArray.push({key: key, value: attributes[key]});
427 }
428 if (attributesArray.length > 0) {
429 return attributeService.saveEntityAttributes(entityId, 'SERVER_SCOPE', attributesArray);
430 } else {
431 return widgetContext.rxjs.of([]);
432 }
433 }
434 }
435 {{/code}}
436
437 **Delete device：**Implementation function: Device deletion
438
439 [[image:1730771318657-502.png]]
440
441 {{code language="none"}}
442 let $injector = widgetContext.$scope.$injector;
443 let dialogs = $injector.get(widgetContext.servicesMap.get('dialogs'));
444 let deviceService = $injector.get(widgetContext.servicesMap.get('deviceService'));
445
446 openDeleteDeviceDialog();
447
448 function openDeleteDeviceDialog() {
449 let title = "Are you sure you want to delete the device " + entityName + "?";
450 let content = "Be careful, after the confirmation, the device and all related data will become unrecoverable!";
451 dialogs.confirm(title, content, 'Cancel', 'Delete').subscribe(
452 function (result) {
453 if (result) {
454 deleteDevice();
455 }
456 }
457 );
458 }
459
460 function deleteDevice() {
461 deviceService.deleteDevice(entityId.id).subscribe(
462 function () {
463 widgetContext.updateAliases();
464 }
465 );
466 }
467
468 {{/code}}
469
470 **jump:I**mplementation function: Jump to the device details page
471
472 [[image:1730771386258-676.png]]
473
474 {{code language="none"}}
475 console.log(entityName)
476 var entitySubType;
477 var $injector = widgetContext.$scope.$injector;
478 //console.log($injector)
479 $injector.get(widgetContext.servicesMap.get('entityService')).getEntity(entityId.entityType, entityId.id)
480 .subscribe(function(data) {
481 console.log(data)
482 entitySubType = data.type;
483 console.log(entitySubType)
484 if (entitySubType == 'AQS01-dragino-office') {
485 openDashboardStates('aqs01_detail');
486 }else if (entitySubType == 'gateway') {
487 openDashboardStates('gateway_detail');
488 } else if (entitySubType == 'gxhl01') {
489 openDashboardStates('detail');
490
491 } else if (entitySubType == 'tank-type1') {
492 openDashboardStates('test1');
493 }
494 else if (entitySubType == 'LDS12') {
495 openDashboardStates('lds12_detail');
496 }
497 else if (entitySubType == 'LDS02') {
498 openDashboardStates('lds02_detail');
499 }
500 else if (entitySubType == 'SE01') {
501 openDashboardStates('se01_detail');
502 }
503 else if (entitySubType == 'PB01') {
504 openDashboardStates('pb01_detail');
505 }
506 else if (entitySubType == 'LWL02') {
507 openDashboardStates('lwl02_detail');
508 }
509 else if (entitySubType == 'LPS8N') {
510 openDashboardStates('lps8n_detail');
511 }
512 else if (entitySubType == 'LHT65N') {
513 openDashboardStates('lht65n_detail');
514 }
515 else if (entitySubType == 'S31b') {
516 openDashboardStates('s31b_detail');
517 }
518 });
519
520 function openDashboardStates(statedId) {
521 var stateParams = widgetContext.stateController.getStateParams();
522 //console.log(stateParams)
523 var params = {
524 entityId: entityId,
525 entityName: entityName
526 };
527 widgetContext.stateController.updateState(statedId, params, false);
528 }
529 {{/code}}
530
531 (% class="wikigeneratedid" id="H-1" %)
532 **Add device：**Implementation function: Add device
533
534 [[image:1730771441589-122.png]]
535
536 {{code language="none"}}
537 let $injector = widgetContext.$scope.$injector;
538 let customDialog = $injector.get(widgetContext.servicesMap.get('customDialog'));
539 let deviceService = $injector.get(widgetContext.servicesMap.get('deviceService'));
540 let attributeService = $injector.get(widgetContext.servicesMap.get('attributeService'));
541
542 openAddDeviceDialog();
543
544 function openAddDeviceDialog() {
545 customDialog.customDialog(htmlTemplate, AddDeviceDialogController).subscribe();
546 }
547
548 function AddDeviceDialogController(instance) {
549 let vm = instance;
550
551 vm.addDeviceFormGroup = vm.fb.group({
552 deviceName: ['', [vm.validators.required]],
553 deviceType: ['', [vm.validators.required]],
554 deviceLabel: [''],
555 attributes: vm.fb.group({
556 latitude: [null],
557 longitude: [null]
558 })
559 });
560
561 vm.cancel = function() {
562 vm.dialogRef.close(null);
563 };
564
565 vm.save = function() {
566 vm.addDeviceFormGroup.markAsPristine();
567 let device = {
568 name: vm.addDeviceFormGroup.get('deviceName').value,
569 type: vm.addDeviceFormGroup.get('deviceType').value,
570 label: vm.addDeviceFormGroup.get('deviceLabel').value
571 };
572 deviceService.saveDevice(device).subscribe(
573 function (device) {
574 saveAttributes(device.id).subscribe(
575 function () {
576 widgetContext.updateAliases();
577 vm.dialogRef.close(null);
578 }
579 );
580 }
581 );
582 };
583
584 function saveAttributes(entityId) {
585 let attributes = vm.addDeviceFormGroup.get('attributes').value;
586 let attributesArray = [];
587 for (let key in attributes) {
588 attributesArray.push({key: key, value: attributes[key]});
589 }
590 if (attributesArray.length > 0) {
591 return attributeService.saveEntityAttributes(entityId, "SERVER_SCOPE", attributesArray);
592 } else {
593 return widgetContext.rxjs.of([]);
594 }
595 }
596 }
597 {{/code}}
598
599 ==== ====
600
601 ===== 4.1.2.2.3 Asset Alarm: =====
602
603 **Data：**
604
605
606 ==== 4.1.2.3、Configure the first layer menu interface ====
607
608 ===== 4.1.2.3.1 Map: =====
609
610 **Data:**
611
612 [[image:1730710271230-716.png||height="729" width="1427"]]
613
614 **Actions**:The map interface has two actions, among which Select supermarket can refresh the device list and related alarms on the right side to enter the location, and Supermarket_detail can jump to the second level physical interface to view the details of the location based on the selected location
615
616 [[image:1730710850458-781.png||height="770" width="1429"]]
617
618 **Select supermarket:**Implementation function: Refresh the side page
619
620 {{code language="none"}}
621 var params = widgetContext.stateController.getStateParams();
622 var selectedSupermarket = params['selectedSupermarket'];
623 if (selectedSupermarket && selectedSupermarket.entityId.id === entityId.id) {
624 params['selectedSupermarket'] = null;
625 } else {
626 params['selectedSupermarket'] = { entityId: entityId, entityName: entityName, entityLabel: entityLabel };
627 }
628 widgetContext.stateController.updateState(null, params);
629 {{/code}}
630
631 [[image:1730710875401-848.png||height="767" width="1429"]]
632
633 **Supermarket_detail:**Implementation function: Jump to the asset details page
634
635 {{code language="none"}}
636 var params = JSON.parse(JSON.stringify(widgetContext.stateController.getStateParams()));
637 params['selectedSupermarket'] = {
638 entityId: entityId,
639 entityName: entityName,
640 entityLabel: entityLabel,
641 };
642 params['targetEntityParamName'] = 'selectedSupermarket';
643 params['selectedDevice'] = null;
644
645 widgetContext.stateController.openState('svgmap', params);
646 {{/code}}
647
648 [[image:1730710990334-601.png||height="772" width="1433"]]
649
650 * (((
651 In this demo, exclusive map icons were set as follows:
652 )))
653
654 {{code language="none"}}
655 var res = {
656 url: images[0],
657 size: 66
658 };
659 return res;
660 {{/code}}
661
662 [[image:1730710395303-672.png||height="771" width="1438"]]
663
664 ===== 4.1.2.3.2 Asset List: =====
665
666 **Data:**
667
668 [[image:1730710693066-349.png||height="772" width="1439"]]
669
670 **Actions:**The Assets List interface has an action, which is the same as the Supermarket_details in the Map. You can jump to the second level entity interface to view the details of the selected location based on its location
671
672 [[image:1730712335338-750.png||height="751" width="1423"]]
673
674 [[image:1730712473941-913.png||height="781" width="1422"]]
675
676 ===== 4.1.2.3.3 All Alarms: =====
677
678 [[image:1730712539209-554.png||height="764" width="1424"]]
679
680 == 4.2 Alarm configuration details ==
681
682 === 4.2.1 High temperature ===
683
684 Creat:
685
686 [[image:1730862483514-101.png||height="750" width="1407"]]
687
688 Clear:
689
690 [[image:1730862584519-902.png||height="758" width="1404"]]
691
692 === 4.2.2 Low Temperature ===
693
694 Creat:
695
696 [[image:1730863708259-750.png||height="752" width="1403"]]
697
698 Clear:
699
700 [[image:1730863750414-979.png||height="746" width="1403"]]
701
702 === 4.2.3 High humidity ===
703
704 Creat:
705
706 [[image:1730864045747-876.png||height="752" width="1396"]]
707
708 Clear:
709
710 [[image:1730864077395-395.png||height="735" width="1393"]]
711
712 === 4.2.4 Low humidity ===
713
714 Creat：
715
716 [[image:1730864117808-484.png||height="741" width="1392"]]
717
718 Clear：
719
720 [[image:1730864159071-895.png||height="745" width="1392"]]
721
722 === 4.2.5 Low voltage ===
723
724 Creat：
725
726 [[image:1730864207037-477.png||height="740" width="1388"]]
727
728 Clear：
729
730 [[image:1730864250506-111.png||height="735" width="1389"]]
731
732 === 4.2.6 Device Disconnected ===
733
734 Creat：
735
736 [[image:1730864293216-991.png||height="739" width="1387"]]
737
738 Clear：
739
740 [[image:1730864331859-740.png||height="735" width="1385"]]
741
742 == 4.3 Rule chain configuration details ==
743
744 [[image:1730864784118-474.png]]
745
746 **Script：**Email configuration for sending device alarm information
747
748 [[image:1730864676542-406.png||height="732" width="1384"]]
749
750 {{code language="none"}}
751 function locatime(timenumber){
752 var date = new Date(timenumber)
753 return date.toLocaleDateString() + ' ' + date.toLocaleTimeString()
754 }
755 var name = msg.name
756 var devicename = msg.originatorName
757 var label = msg.originatorLabel
758 var status = msg.status
759 var detaildata =JSON.parse(msg.details.data)
760 var tempswitch
761
762 if (name != "Device Disconnected") {
763 //detaildata=JSON.parse(msg.details.data)
764 if (detaildata.Temperature_alarm_switch == true) {
765 tempswitch = "open"
766 } else {
767 tempswitch = "close"
768 }
769 var humswitch
770 if (detaildata.Humidity_alarm_switch == true) {
771 humswitch = "open"
772 } else {
773 humswitch = "close"
774 }
775 var batswitch
776 if (detaildata.Voltage_alarm_switch == true) {
777 batswitch = "open"
778 } else {
779 batswitch = "close"
780 }
781 var str2 = "<p>-- Temperature alarm switch status: " +
782 tempswitch + "</p>" +
783 "<p>-- Humidity alarm switch status: " + humswitch +
784 "</p>" +
785 "<p>-- Voltage alarm switch status: " + batswitch
786 }
787
788 if (name == "High Temperature" && status ==
789 "ACTIVE_UNACK") {
790 var emailstr =
791 "<div><p><span style='color: black; font-weight: bold'>" +
792 "Device " + label + " has alarm:</span></p>" +
793 "<p><span style='color: red; font-weight: bold'>-- High Temperature Alarm</span></p>" +
794 "<p>-- Current Temperature : " + detaildata
795 .TempC_SHT + "</p><br>" +
796 "<p>Device Configure:</p>" +
797 "<p>-- Temperature Threshold : min: " + detaildata
798 .Low_temperature_alarm + ", max: " + detaildata
799 .High_temperature_alarm + "</p>" +
800 "<p>-- Humidity Threshold: min: " + detaildata
801 .Low_humidity_alarm + ", max:" + detaildata
802 .High_humidity_alarm + "</p>" +
803 "<p>-- Battery threshold: min: " + detaildata
804 .Low_voltage_alarm + "</p>" + str2 + "</div>"
805 return {
806 msg: {
807 "data": emailstr
808 },
809 metadata: metadata,
810 msgType: msgType
811 };
812 } else if (name == "Low Temperature" && status ==
813 "ACTIVE_UNACK") {
814 var emailstr =
815 "<div><p><span style='color: black; font-weight: bold'>" +
816 "Device " + label + " has alarm:</span></p>" +
817 "<p><span style='color: red; font-weight: bold'>-- Low Temperature Alarm</span></p>" +
818 "<p>-- Current Temperature : " + detaildata
819 .TempC_SHT + "</p><br>" +
820 "<p>Device Configure:</p>" +
821 "<p>-- Temperature Threshold : min: " + detaildata
822 .Low_temperature_alarm + ", max: " + detaildata
823 .High_temperature_alarm + "</p>" +
824 "<p>-- Humidity Threshold: min: " + detaildata
825 .Low_humidity_alarm + ", max:" + detaildata
826 .High_humidity_alarm + "</p>" +
827 "<p>-- Battery threshold: min: " + detaildata
828 .Low_voltage_alarm + "</p>" + str2 + "</div>"
829
830 return {
831 msg: {
832 "data": emailstr
833 },
834 metadata: metadata,
835 msgType: msgType
836 };
837
838 } else if (name == "Device Disconnected" && status ==
839 "ACTIVE_UNACK") {
840 var time1 = locatime(Number(detaildata.lastActivityTime))
841 //var time1 = detaildata.lastActivityTime
842 // var chazhi = parseInt((detaildata.inactivityAlarmTime-detaildata.lastActivityTime)/1000/60)
843 // var emailstr =
844 // "<div><p><span style='color: red; font-weight: bold'>" +
845 // "Device " + label + " has Alarm</span></p><p>Last activity time: "+time1+"</p><p>Last Uplink: 21"+"minutes ago</p></div>"
846
847 var emailstr ="Device " + label + " has Alarm##Last activity time: "+time1+"##Last Uplink: 21minutes ago"
848 var newType = "POST_TELEMETRY_REQUEST"
849 return {
850 msg:emailstr,
851 metadata: metadata,
852 msgType: newType
853 }
854 } else if (name == "High humidity" && status ==
855 "ACTIVE_UNACK") {
856 var emailstr =
857 "<div><p><span style='color: black; font-weight: bold'>" +
858 "Device " + label + " has alarm:</span></p>" +
859 "<p><span style='color: red; font-weight: bold'>-- High Humidity Alarm</span></p>" +
860 "<p>-- Current Temperature : " + detaildata
861 .Hum_SHT + "</p><br>" +
862 "<p>Device Configure:</p>" +
863 "<p>-- Temperature Threshold : min: " + detaildata
864 .Low_temperature_alarm + ", max: " + detaildata
865 .High_temperature_alarm + "</p>" +
866 "<p>-- Humidity Threshold: min: " + detaildata
867 .Low_humidity_alarm + ", max:" + detaildata
868 .High_humidity_alarm + "</p>" +
869 "<p>-- Battery threshold: min: " + detaildata
870 .Low_voltage_alarm + "</p>" + str2 + "</div>"
871
872 return {
873 msg: {
874 "data": emailstr
875 },
876 metadata: metadata,
877 msgType: msgType
878 };
879 } else if (name == "Low humidity" && status ==
880 "ACTIVE_UNACK") {
881 var emailstr =
882 "<div><p><span style='color: black; font-weight: bold'>" +
883 "Device " + label + " has alarm:</span></p>" +
884 "<p><span style='color: red; font-weight: bold'>-- Low Humidity Alarm</span></p>" +
885 "<p>-- Current Temperature : " + detaildata
886 .Hum_SHT + "</p><br>" +
887 "<p>Device Configure:</p>" +
888 "<p>-- Temperature Threshold : min: " + detaildata
889 .Low_temperature_alarm + ", max: " + detaildata
890 .High_temperature_alarm + "</p>" +
891 "<p>-- Humidity Threshold: min: " + detaildata
892 .Low_humidity_alarm + ", max:" + detaildata
893 .High_humidity_alarm + "</p>" +
894 "<p>-- Battery threshold: min: " + detaildata
895 .Low_voltage_alarm + "</p>" + str2 + "</div>"
896
897 return {
898 msg: {
899 "data": emailstr
900 },
901 metadata: metadata,
902 msgType: msgType
903 };
904 } else if (name == "Low voltage" && status ==
905 "ACTIVE_UNACK") {
906 var emailstr =
907 "<div><p><span style='color: black; font-weight: bold'>" +
908 "Device " + label + " has alarm:</span></p>" +
909 "<p><span style='color: red; font-weight: bold'>-- Low Voltage Alarm</span></p>" +
910 "<p>-- Current Temperature : " + detaildata.BatV +
911 "</p><br>" +
912 "<p>Device Configure:</p>" +
913 "<p>-- Temperature Threshold : min: " + detaildata
914 .Low_temperature_alarm + ", max: " + detaildata
915 .High_temperature_alarm + "</p>" +
916 "<p>-- Humidity Threshold: min: " + detaildata
917 .Low_humidity_alarm + ", max:" + detaildata
918 .High_humidity_alarm + "</p>" +
919 "<p>-- Battery threshold: min: " + detaildata
920 .Low_voltage_alarm + "</p>" + str2 + "</div>"
921
922 return {
923 msg: {
924 "data": emailstr
925 },
926 metadata: metadata,
927 msgType: msgType
928 };
929 } else if (name == "High Temperature" && status ==
930 "CLEARED_UNACK") {
931 var emailstr =
932 "<div><p><span style='color: green; font-weight: bold'>Device " +
933 label +
934 " High Temperature Alarm Cleared</span></p>" +
935 "<p>-- Current Temperature : " + detaildata
936 .TempC_SHT + "</p><br>" +
937 "<p>Device Configure:</p>" +
938 "<p>-- Temperature Threshold : min: " + detaildata
939 .Low_temperature_alarm + ", max: " + detaildata
940 .High_temperature_alarm + "</p>" +
941 "<p>-- Humidity Threshold: min: " + detaildata
942 .Low_humidity_alarm + ", max:" + detaildata
943 .High_humidity_alarm + "</p>" +
944 "<p>-- Battery threshold: min: " + detaildata
945 .Low_voltage_alarm + "</p>" + str2 + "</div>"
946
947 return {
948 msg: {
949 "data": emailstr
950 },
951 metadata: metadata,
952 msgType: msgType
953 };
954 } else if (name == "Low Temperature" && status ==
955 "CLEARED_UNACK") {
956 var emailstr =
957 "<div><p><span style='color: green; font-weight: bold'>Device " +
958 label +
959 " Low Temperature Alarm Cleared</span></p>" +
960 "<p>-- Current Temperature : " + detaildata
961 .TempC_SHT + "</p><br>" +
962 "<p>Device Configure:</p>" +
963 "<p>-- Temperature Threshold : min: " + detaildata
964 .Low_temperature_alarm + ", max: " + detaildata
965 .High_temperature_alarm + "</p>" +
966 "<p>-- Humidity Threshold: min: " + detaildata
967 .Low_humidity_alarm + ", max:" + detaildata
968 .High_humidity_alarm + "</p>" +
969 "<p>-- Battery threshold: min: " + detaildata
970 .Low_voltage_alarm + "</p>" + str2 + "</div>"
971
972 return {
973 msg: {
974 "data": emailstr
975 },
976 metadata: metadata,
977 msgType: msgType
978 };
979 } else if (name == "High humidity" && status ==
980 "CLEARED_UNACK") {
981 var emailstr =
982 "<div><p><span style='color: green; font-weight: bold'>Device " +
983 label + " High Humidity Alarm Cleared</span></p>" +
984 "<p>-- Current Temperature : " + detaildata
985 .Hum_SHT + "</p><br>" +
986 "<p>Device Configure:</p>" +
987 "<p>-- Temperature Threshold : min: " + detaildata
988 .Low_temperature_alarm + ", max: " + detaildata
989 .High_temperature_alarm + "</p>" +
990 "<p>-- Humidity Threshold: min: " + detaildata
991 .Low_humidity_alarm + ", max:" + detaildata
992 .High_humidity_alarm + "</p>" +
993 "<p>-- Battery threshold: min: " + detaildata
994 .Low_voltage_alarm + "</p>" + str2 + "</div>"
995
996 return {
997 msg: {
998 "data": emailstr
999 },
1000 metadata: metadata,
1001 msgType: msgType
1002 };
1003 } else if (name == "Low humidity" && status ==
1004 "CLEARED_UNACK") {
1005 var emailstr =
1006 "<div><p><span style='color: green; font-weight: bold'>Device " +
1007 label + " Low Humidity Alarm Cleared</span></p>" +
1008 "<p>-- Current Temperature : " + detaildata
1009 .Hum_SHT + "</p><br>" +
1010 "<p>Device Configure:</p>" +
1011 "<p>-- Temperature Threshold : min: " + detaildata
1012 .Low_temperature_alarm + ", max: " + detaildata
1013 .High_temperature_alarm + "</p>" +
1014 "<p>-- Humidity Threshold: min: " + detaildata
1015 .Low_humidity_alarm + ", max:" + detaildata
1016 .High_humidity_alarm + "</p>" +
1017 "<p>-- Battery threshold: min: " + detaildata
1018 .Low_voltage_alarm + "</p>" + str2 + "</div>"
1019 return {
1020 msg: {
1021 "data": emailstr
1022 },
1023 metadata: metadata,
1024 msgType: msgType
1025 };
1026 } else if (name == "Low voltage" && status ==
1027 "CLEARED_UNACK") {
1028
1029 var emailstr =
1030 "<div><p><span style='color: green; font-weight: bold'>Device " +
1031 label + " Low Voltage Alarm Cleared</span></p>" +
1032 "<p>-- Current Temperature : " + detaildata.BatV +
1033 "</p><br><br>" +
1034 "<p>Device Configure:</p>" +
1035 "<p>-- Temperature Threshold : min: " + detaildata
1036 .Low_temperature_alarm + ", max: " + detaildata
1037 .High_temperature_alarm + "</p>" +
1038 "<p>-- Humidity Threshold: min: " + detaildata
1039 .Low_humidity_alarm + ", max:" + detaildata
1040 .High_humidity_alarm + "</p>" +
1041 "<p>-- Battery threshold: min: " + detaildata
1042 .Low_voltage_alarm + "</p>" + str2 + "</div>"
1043
1044 return {
1045 msg: {
1046 "data": emailstr
1047 },
1048 metadata: metadata,
1049 msgType: msgType
1050 };
1051 } else if (name == "Device Disconnected" && status ==
1052 "CLEARED_UNACK") {
1053 var time1 = locatime(Number(detaildata.lastActivityTime))
1054 //var time1 = detaildata.lastActivityTime
1055 // var chazhi = parseInt((detaildata.inactivityAlarmTime-detaildata.lastActivityTime)/1000/60)
1056 // var emailstr =
1057 // "<div><p><span style='color: green; font-weight: bold'>" +
1058 // "Device " + label + " has Alarm Cleared</span></p><p>Last activity time: "+time1+"</p></div>"
1059 var emailstr ="Device " + label + " has Alarm Cleared##Last activity time: "+time1
1060 var newType = "POST_TELEMETRY_REQUEST"
1061 return {
1062 msg: emailstr,
1063 metadata: metadata,
1064 msgType: newType
1065 }
1066 }
1067 {{/code}}
1068
1069 (% class="wikigeneratedid" %)
1070 **Generate Report：**
1071
1072 (% class="wikigeneratedid" %)
1073 [[image:1730865053380-293.png]]
1074
1075 = 5.other =
1076
1077 * If you want to create a similar dashboard, after understanding the case, you can download and import the dashboard, device profiles, rule chains, etc. of the case on GitHub, and make modifications based on them.
1078 * GitHub address：[[https:~~/~~/github.com/ThingsEye-io/te-platform/tree/main/case/Dragino%20Office%20%26%20Factory>>https://github.com/ThingsEye-io/te-platform/tree/main/case/Dragino%20Office%20%26%20Factory]]