Wiki source code of Demo for Smart Office, Factory

Version 61.1 by Hera Guo on 2024/11/07 10:21
Show last authors
1 **Table of Contents:**
2
3 {{toc/}}
4
5
6
7
8
9
10
11 = 1. About this demo =
12
13 This demo is to show the installation for various sensors in Dragino Office, Dragino Facotry & ThingsEye Office. It covers various types of sensors such as Temperature, Humidity, CO2, Water Flow, Vibration & many many.
14
15 User can check this [[Public Share Link>>https://thingseye.io/dashboard/d17f70f0-6b5f-11ef-a329-6fb88c149adb?publicId=33180810-5c40-11ef-a329-6fb88c149adb ]] and see the dash board for this demo. The dash board keeps updating, while the main structure will keep the same. It has **Three Level DashBoard **as decribe below.
16
17 * **First Level - Overview for all branches**: This dashboard shows all branches overview status and location.
18 * **Second Level - Branch Level**: This dashboard shows all sensors installation and status in the selected branch.
19 * **Third Level - Sensor Level**: This dashboard shows the detail reading for a specify sensor
20
21 [[image:Level1.png||height="133" width="298"]] [[image:Arrow.png||height="27" width="51"]] [[image:Level2.png||height="134" width="264"]][[image:Arrow.png||height="27" width="51"]] [[image:2024-09-26 23-47-06.png||height="130" width="256"]]
22
23
24 The rest of this chapter will provide the introduction for how to set up similiar solution.
25
26
27 = 2.Basic configuration instructions =
28
29 When you start a complex IoT project, you first need to learn some basic configuration methods for ThingsEye.
30
31 Here are some instructions you need to know：
32
33 Dashboard creation and some basic configurations:[[https:~~/~~/wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20import%20and%20use%20the%20dashboard%3F/#H3.2.2.1CreatA0alarm>>https://wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20import%20and%20use%20the%20dashboard%3F/#H3.2.2.1CreatA0alarm]]
34
35 Rule chain creation:[[https:~~/~~/wiki.thingseye.io/xwiki/bin/view/Main/Basic%20configuration%20of%20rule%20chains>>https://wiki.thingseye.io/xwiki/bin/view/Main/Basic%20configuration%20of%20rule%20chains/]]
36
37 Devices connected to thingseye：[[https:~~/~~/wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20connect%20my%20devices%20to%20ThingsEye%3F/>>https://wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20connect%20my%20devices%20to%20ThingsEye%3F/]]
38
39 = 3.overview =
40
41 == 3.1 MHierarchical architectureore features ==
42
43 Before we start a project, we first need to understand the organizational structure of the project. Only with a clear outline can our project construction process be smoother
44
45 **Assets：**Dragino Office  、Dragino Factory
46
47 **Devices：**
48
49 Dragino Factory：temperature and humidity measurement×7、Gateway×1
50
51 Dragino Office：temperature and humidity measurement×2、Air quality measurement×4
52
53 == 3.2 Dashboard architecture ==
54
55 In this demo, the dashboard is divided into three layers, namely: home page, asset, and device.
56
57 **home page:**It includes three parts: map, asset list, and all alarm. From this interface, you can see how many factories, offices, and so on there are
58
59 **asset:**It includes three parts: asset map, device list, and asset alarm. From this interface, you can see how many sensors are deployed in the office or project, where they are located, and their alarm status
60
61 **device:**This section displays the specific information collected by the device, and different types of sensors have different display interfaces
62
63 [[image:屏幕截图 2024-11-04 134645.png]]
64
65 First floor：
66
67 [[image:1730702565889-204.png||height="771" width="1445"]]
68
69 Second floor：
70
71 [[image:1730702622551-808.png||height="756" width="1450"]]
72
73 Third floor：
74
75 [[image:1730702656725-496.png||height="775" width="1455"]]
76
77 [[image:1730702814435-805.png||height="797" width="1458"]]
78
79
80 [[image:1730702688377-367.png||height="770" width="1462"]]
81
82 * How many types of devices do you need, how many layers of third level dashboards you need to create.
83
84 == 3.3 Alarm rules ==
85
86 High Temperature、Low Temperature、High humidity、Low humidity、Low voltage、Device Disconnected
87
88 [[image:屏幕截图 2024-11-04 135045.png]]
89
90 = 4.configuration details =
91
92 After understanding the architecture and layering of the complete project, we can start configuring it
93
94 == 4.1 Dashboard configuration details ==
95
96 === 4.1.1.Data source (Entity aliases) ===
97
98 detail:Obtain data based on dashboard status
99
100 [[image:1730709424998-915.png||height="729" width="1436"]]
101
102 Alarm:Obtain alarm information
103
104 [[image:1730709479828-595.png||height="696" width="1435"]]
105
106 Dragino&GXHL,Ltd:Obtain data through asset types
107
108 [[image:1730709511861-439.png||height="714" width="1435"]]
109
110 Selected Supermarket:Retrieve devices by device type
111
112 [[image:1730709527720-418.png||height="751" width="1433"]]
113
114 Supermarket Devices:Obtain data through device type
115
116 [[image:1730709555797-383.png||height="726" width="1434"]]
117
118 LHT65N Device：Obtain data based on device type
119
120 [[image:1730857191863-514.png||height="725" width="1433"]]
121
122 === 4.1.2.Page Configuration ===
123
124 ==== 4.1.2.1、Configure the interface of the third layer Davies. ====
125
126 ==== 4.1.2.2、Configure the interface of the second layer asset ====
127
128 ===== 4.1.2.2.1 Equipment distribution diagram： =====
129
130 **Data：**
131
132 [[image:1730770392454-317.png||height="745" width="1439"]]
133
134 **Appearannce：**In this module, we need to arrange our devices in the corresponding positions and use icons to display our devices. Therefore, in the Appearance interface, we need to configure them
135
136 **Tooltip function：**This module displays the current information of the device
137
138 [[image:1730857537965-184.png]]
139
140 {{code language="none"}}
141 var msg = data
142 if(msg.Label=="gateway" && msg.type == "gateway"){
143 var stauts
144 if (msg.gatewaystauts=="true"){
145 stauts = "Connect"
146 }
147 else{
148 stauts = "Disconnected"
149 }
150 var str = "<b>"+msg.entityName+"</b><br/><b>"+stauts+"</b><br/>"
151 return str
152 }
153 else if(msg.type=="gxhl01" && msg.Label!="gateway"){
154 var str = "<b>"+msg.entityName+"</b><br/><b>"+msg.Label+"</b><br/><b>Bat:</b>"+msg.BatV+"V<br/><b>Temperature:</b>"+ msg.TempC_SHT+ "°C<br/><b>Humidity:</b>"+msg.Hum_SHT+"%"
155 return str
156 }
157 else{
158 var str = "<b>"+msg.entityName+"</b><br/><b>"+msg.Label+"</b><br/><b>Bat:</b>"+msg.BatV+"V<br/><b>Temperature:</b>"+ msg.temperature+ "°C<br/><b>Humidity:"+msg.humidity+"%"+"</b><br/>"+
159 "<b>Co2:"+msg.co2+"</b></br><b>Air_Pressure:"+msg.air_pressure
160
161 return str
162 }
163 {{/code}}
164
165 (% class="wikigeneratedid" id="HMarkerimagefunctionFF1A" %)
166 **Marker image function：**This module can display different icons based on different types of sensors and their status to achieve its functionality
167
168 (% class="wikigeneratedid" %)
169 [[image:1730857750749-240.png]]
170
171 {{code language="none"}}
172 var res
173 var msg = data
174 if(msg.Label=="gateway" && msg.type=="gateway"){
175 if (msg.gatewaystauts == "true"){
176 res = {
177 url: images[3],
178 size: 40
179 }
180 }
181 else{
182 res = {
183 url: images[2],
184 size: 40
185 }
186 }}
187 else if(msg.Label!="gateway" && msg.type=="gxhl01" ){
188 if (msg.active=="false"){
189 res = {
190 url: images[1],
191 size: 40
192 }}
193 else{
194 res = {
195 url: images[0],
196 size: 40
197 }
198 }
199 }
200 else if(msg.type=="LWL02"){
201 if (msg.WATER_LEAK_STATUS=="0"){
202 res = {
203 url: images[6],
204 size: 40
205 }}
206 else{
207 res = {
208 url: images[7],
209 size: 40
210 }
211 }
212 }
213 else if(msg.type=="LDS02"){
214 if (msg.DOOR_OPEN_STATUS=="0"){
215 res = {
216 url: images[5],
217 size: 40
218 }}
219 else{
220 res = {
221 url: images[8],
222 size: 40
223 }
224 }
225 }
226 else if(msg.type=="LDS12"){
227 res = {
228 url: images[10],
229 size: 40
230 }}
231 else if(msg.type=="SE01"){
232 res = {
233 url: images[9],
234 size: 40
235 }}
236 else if(msg.type=="PB01"){
237 res = {
238 url: images[11],
239 size: 40
240 }}
241 else if(msg.type=="S31b"){
242 res = {
243 url: images[12],
244 size: 40
245 }}
246 else if(msg.type=="LHT65N"){
247 res = {
248 url: images[13],
249 size: 40
250 }}
251 else{
252 res = {
253 url: images[4],
254 size: 40
255 }
256 }
257 return res;
258 {{/code}}
259
260 (% class="wikigeneratedid" %)
261 [[image:1730770875793-351.png||height="799" width="1474"]]
262
263 (% class="wikigeneratedid" %)
264 **Actions:**We need to implement the function of entering the details interface through the corresponding device icon, so in this module, we need to add actions to achieve redirection
265
266 {{code language="none"}}
267 var entitySubType;
268 var $injector = widgetContext.$scope.$injector;
269 $injector.get(widgetContext.servicesMap.get('entityService')).getEntity(entityId.entityType, entityId.id)
270 .subscribe(function(data) {
271 entitySubType = data.type;
272 console.log(entitySubType)
273 if (entitySubType == 'gateway') {
274 openDashboardStates('gateway_detail');
275 } else if (entitySubType == 'gxhl01') {
276 openDashboardStates('detail');
277 }
278 else if(entitySubType == 'AQS01-dragino-office'){
279 openDashboardStates("aqs01_detail")
280 }
281 else if (entitySubType == 'LDS12') {
282 openDashboardStates('lds12_detail');
283 }
284 else if (entitySubType == 'LDS02') {
285 openDashboardStates('lds02_detail');
286 }
287 else if (entitySubType == 'SE01') {
288 openDashboardStates('se01_detail');
289 }
290 else if (entitySubType == 'PB01') {
291 openDashboardStates('pb01_detail');
292 }
293 else if (entitySubType == 'LWL02') {
294 openDashboardStates('lwl02_detail');
295 }
296 else if (entitySubType == 'LPS8N') {
297 openDashboardStates('lps8n_detail');
298 }
299 else if (entitySubType == 'LHT65N') {
300 openDashboardStates('lht65n_detail');
301 }
302 else if (entitySubType == 'S31b') {
303 openDashboardStates('s31b_detail');
304 }
305 });
306
307 function openDashboardStates(statedId) {
308 var stateParams = widgetContext.stateController.getStateParams();
309 var params = {
310 entityId: entityId,
311 entityName: entityName
312 };
313
314 if (stateParams.city) {
315 params.city = stateParams.city;
316 }
317
318 widgetContext.stateController.openState(statedId, params, false);
319 }
320
321 {{/code}}
322
323 [[image:1730771103096-522.png||height="815" width="1503"]]
324
325 ===== 4.1.2.2.2 Device List =====
326
327 (% class="wikigeneratedid" id="HDataFF1A" %)
328 **Data：**
329
330 [[image:1730771199343-553.png||height="802" width="1501"]]
331
332 **Actions：**Equipment distribution diagram: In this module, functions need to be implemented such as adding devices, editing devices, deleting devices, and jumping to the device details page. Therefore, the following actions need to be added:
333
334 [[image:1730771228766-212.png]]
335
336 (% class="wikigeneratedid" id="HEditdeviceFF1A" %)
337 **Edit device：**Implementation function: Device editing
338
339 [[image:1730771256045-238.png]]
340
341 {{code language="none"}}
342 let $injector = widgetContext.$scope.$injector;
343 let customDialog = $injector.get(widgetContext.servicesMap.get('customDialog'));
344 let deviceService = $injector.get(widgetContext.servicesMap.get('deviceService'));
345 let attributeService = $injector.get(widgetContext.servicesMap.get('attributeService'));
346
347 openEditDeviceDialog();
348
349 function openEditDeviceDialog() {
350 customDialog.customDialog(htmlTemplate, EditDeviceDialogController).subscribe();
351 }
352
353 function EditDeviceDialogController(instance) {
354 let vm = instance;
355
356 vm.device = null;
357 vm.attributes = {};
358
359 vm.editDeviceFormGroup = vm.fb.group({
360 deviceName: ['', [vm.validators.required]],
361 deviceType: ['', [vm.validators.required]],
362 deviceLabel: [''],
363 attributes: vm.fb.group({
364 latitude: [null],
365 longitude: [null]
366 })
367 });
368
369 vm.cancel = function() {
370 vm.dialogRef.close(null);
371 };
372
373 vm.save = function() {
374 vm.editDeviceFormGroup.markAsPristine();
375 if (vm.editDeviceFormGroup.get('deviceType').value !== vm.device.type) {
376 delete vm.device.deviceProfileId;
377 }
378 vm.device.name = vm.editDeviceFormGroup.get('deviceName').value,
379 vm.device.type = vm.editDeviceFormGroup.get('deviceType').value,
380 vm.device.label = vm.editDeviceFormGroup.get('deviceLabel').value
381 deviceService.saveDevice(vm.device).subscribe(
382 function () {
383 saveAttributes().subscribe(
384 function () {
385 widgetContext.updateAliases();
386 vm.dialogRef.close(null);
387 }
388 );
389 }
390 );
391 };
392
393 getEntityInfo();
394
395 function getEntityInfo() {
396 deviceService.getDevice(entityId.id).subscribe(
397 function (device) {
398 attributeService.getEntityAttributes(entityId, 'SERVER_SCOPE',
399 ['latitude', 'longitude']).subscribe(
400 function (attributes) {
401 for (let i = 0; i < attributes.length; i++) {
402 vm.attributes[attributes[i].key] = attributes[i].value;
403 }
404 vm.device = device;
405 vm.editDeviceFormGroup.patchValue(
406 {
407 deviceName: vm.device.name,
408 deviceType: vm.device.type,
409 deviceLabel: vm.device.label,
410 attributes: {
411 latitude: vm.attributes.latitude,
412 longitude: vm.attributes.longitude
413 }
414 }, {emitEvent: false}
415 );
416 }
417 );
418 }
419 );
420 }
421
422 function saveAttributes() {
423 let attributes = vm.editDeviceFormGroup.get('attributes').value;
424 let attributesArray = [];
425 for (let key in attributes) {
426 attributesArray.push({key: key, value: attributes[key]});
427 }
428 if (attributesArray.length > 0) {
429 return attributeService.saveEntityAttributes(entityId, 'SERVER_SCOPE', attributesArray);
430 } else {
431 return widgetContext.rxjs.of([]);
432 }
433 }
434 }
435 {{/code}}
436
437 **Delete device：**Implementation function: Device deletion
438
439 [[image:1730771318657-502.png]]
440
441 {{code language="none"}}
442 let $injector = widgetContext.$scope.$injector;
443 let dialogs = $injector.get(widgetContext.servicesMap.get('dialogs'));
444 let deviceService = $injector.get(widgetContext.servicesMap.get('deviceService'));
445
446 openDeleteDeviceDialog();
447
448 function openDeleteDeviceDialog() {
449 let title = "Are you sure you want to delete the device " + entityName + "?";
450 let content = "Be careful, after the confirmation, the device and all related data will become unrecoverable!";
451 dialogs.confirm(title, content, 'Cancel', 'Delete').subscribe(
452 function (result) {
453 if (result) {
454 deleteDevice();
455 }
456 }
457 );
458 }
459
460 function deleteDevice() {
461 deviceService.deleteDevice(entityId.id).subscribe(
462 function () {
463 widgetContext.updateAliases();
464 }
465 );
466 }
467
468 {{/code}}
469
470 **jump:I**mplementation function: Jump to the device details page
471
472 [[image:1730771386258-676.png]]
473
474 {{code language="none"}}
475 console.log(entityName)
476 var entitySubType;
477 var $injector = widgetContext.$scope.$injector;
478 //console.log($injector)
479 $injector.get(widgetContext.servicesMap.get('entityService')).getEntity(entityId.entityType, entityId.id)
480 .subscribe(function(data) {
481 console.log(data)
482 entitySubType = data.type;
483 console.log(entitySubType)
484 if (entitySubType == 'AQS01-dragino-office') {
485 openDashboardStates('aqs01_detail');
486 }else if (entitySubType == 'gateway') {
487 openDashboardStates('gateway_detail');
488 } else if (entitySubType == 'gxhl01') {
489 openDashboardStates('detail');
490
491 } else if (entitySubType == 'tank-type1') {
492 openDashboardStates('test1');
493 }
494 else if (entitySubType == 'LDS12') {
495 openDashboardStates('lds12_detail');
496 }
497 else if (entitySubType == 'LDS02') {
498 openDashboardStates('lds02_detail');
499 }
500 else if (entitySubType == 'SE01') {
501 openDashboardStates('se01_detail');
502 }
503 else if (entitySubType == 'PB01') {
504 openDashboardStates('pb01_detail');
505 }
506 else if (entitySubType == 'LWL02') {
507 openDashboardStates('lwl02_detail');
508 }
509 else if (entitySubType == 'LPS8N') {
510 openDashboardStates('lps8n_detail');
511 }
512 else if (entitySubType == 'LHT65N') {
513 openDashboardStates('lht65n_detail');
514 }
515 else if (entitySubType == 'S31b') {
516 openDashboardStates('s31b_detail');
517 }
518 });
519
520 function openDashboardStates(statedId) {
521 var stateParams = widgetContext.stateController.getStateParams();
522 //console.log(stateParams)
523 var params = {
524 entityId: entityId,
525 entityName: entityName
526 };
527 widgetContext.stateController.updateState(statedId, params, false);
528 }
529 {{/code}}
530
531 (% class="wikigeneratedid" id="H-1" %)
532 **Add device：**Implementation function: Add device
533
534 [[image:1730771441589-122.png]]
535
536 {{code language="none"}}
537 let $injector = widgetContext.$scope.$injector;
538 let customDialog = $injector.get(widgetContext.servicesMap.get('customDialog'));
539 let deviceService = $injector.get(widgetContext.servicesMap.get('deviceService'));
540 let attributeService = $injector.get(widgetContext.servicesMap.get('attributeService'));
541
542 openAddDeviceDialog();
543
544 function openAddDeviceDialog() {
545 customDialog.customDialog(htmlTemplate, AddDeviceDialogController).subscribe();
546 }
547
548 function AddDeviceDialogController(instance) {
549 let vm = instance;
550
551 vm.addDeviceFormGroup = vm.fb.group({
552 deviceName: ['', [vm.validators.required]],
553 deviceType: ['', [vm.validators.required]],
554 deviceLabel: [''],
555 attributes: vm.fb.group({
556 latitude: [null],
557 longitude: [null]
558 })
559 });
560
561 vm.cancel = function() {
562 vm.dialogRef.close(null);
563 };
564
565 vm.save = function() {
566 vm.addDeviceFormGroup.markAsPristine();
567 let device = {
568 name: vm.addDeviceFormGroup.get('deviceName').value,
569 type: vm.addDeviceFormGroup.get('deviceType').value,
570 label: vm.addDeviceFormGroup.get('deviceLabel').value
571 };
572 deviceService.saveDevice(device).subscribe(
573 function (device) {
574 saveAttributes(device.id).subscribe(
575 function () {
576 widgetContext.updateAliases();
577 vm.dialogRef.close(null);
578 }
579 );
580 }
581 );
582 };
583
584 function saveAttributes(entityId) {
585 let attributes = vm.addDeviceFormGroup.get('attributes').value;
586 let attributesArray = [];
587 for (let key in attributes) {
588 attributesArray.push({key: key, value: attributes[key]});
589 }
590 if (attributesArray.length > 0) {
591 return attributeService.saveEntityAttributes(entityId, "SERVER_SCOPE", attributesArray);
592 } else {
593 return widgetContext.rxjs.of([]);
594 }
595 }
596 }
597 {{/code}}
598
599 ==== ====
600
601 ===== 4.1.2.2.3 Asset Alarm: =====
602
603 **Data：**
604
605 [[image:1730771504586-433.png||height="762" width="1431"]]
606
607
608 **Actions**:The map interface has two actions, among which Select supermarket can refresh the device list and related alarms on the right side to enter the location, and Supermarket_detail can jump to the second level physical interface to view the details of the location based on the selected location
609
610 [[image:1730710850458-781.png||height="770" width="1429"]]
611
612 **Select supermarket:**Implementation function: Refresh the side page
613
614 {{code language="none"}}
615 var params = widgetContext.stateController.getStateParams();
616 var selectedSupermarket = params['selectedSupermarket'];
617 if (selectedSupermarket && selectedSupermarket.entityId.id === entityId.id) {
618 params['selectedSupermarket'] = null;
619 } else {
620 params['selectedSupermarket'] = { entityId: entityId, entityName: entityName, entityLabel: entityLabel };
621 }
622 widgetContext.stateController.updateState(null, params);
623 {{/code}}
624
625 [[image:1730710875401-848.png||height="767" width="1429"]]
626
627 **Supermarket_detail:**Implementation function: Jump to the asset details page
628
629 {{code language="none"}}
630 var params = JSON.parse(JSON.stringify(widgetContext.stateController.getStateParams()));
631 params['selectedSupermarket'] = {
632 entityId: entityId,
633 entityName: entityName,
634 entityLabel: entityLabel,
635 };
636 params['targetEntityParamName'] = 'selectedSupermarket';
637 params['selectedDevice'] = null;
638
639 widgetContext.stateController.openState('svgmap', params);
640 {{/code}}
641
642 [[image:1730710990334-601.png||height="772" width="1433"]]
643
644 * (((
645 In this demo, exclusive map icons were set as follows:
646 )))
647
648 {{code language="none"}}
649 var res = {
650 url: images[0],
651 size: 66
652 };
653 return res;
654 {{/code}}
655
656 [[image:1730710395303-672.png||height="771" width="1438"]]
657
658 ===== 4.1.2.3.2 Asset List: =====
659
660 **Data:**
661
662 [[image:1730710693066-349.png||height="772" width="1439"]]
663
664 **Actions:**The Assets List interface has an action, which is the same as the Supermarket_details in the Map. You can jump to the second level entity interface to view the details of the selected location based on its location
665
666 [[image:1730712335338-750.png||height="751" width="1423"]]
667
668 [[image:1730712473941-913.png||height="781" width="1422"]]
669
670 ===== 4.1.2.3.3 All Alarms: =====
671
672 [[image:1730712539209-554.png||height="764" width="1424"]]
673
674 == 4.2 Alarm configuration details ==
675
676 === 4.2.1 High temperature ===
677
678 Creat:
679
680 [[image:1730862483514-101.png||height="750" width="1407"]]
681
682 Clear:
683
684 [[image:1730862584519-902.png||height="758" width="1404"]]
685
686 === 4.2.2 Low Temperature ===
687
688 Creat:
689
690 [[image:1730863708259-750.png||height="752" width="1403"]]
691
692 Clear:
693
694 [[image:1730863750414-979.png||height="746" width="1403"]]
695
696 === 4.2.3 High humidity ===
697
698 Creat:
699
700 [[image:1730864045747-876.png||height="752" width="1396"]]
701
702 Clear:
703
704 [[image:1730864077395-395.png||height="735" width="1393"]]
705
706 === 4.2.4 Low humidity ===
707
708 Creat：
709
710 [[image:1730864117808-484.png||height="741" width="1392"]]
711
712 Clear：
713
714 [[image:1730864159071-895.png||height="745" width="1392"]]
715
716 === 4.2.5 Low voltage ===
717
718 Creat：
719
720 [[image:1730864207037-477.png||height="740" width="1388"]]
721
722 Clear：
723
724 [[image:1730864250506-111.png||height="735" width="1389"]]
725
726 === 4.2.6 Device Disconnected ===
727
728 Creat：
729
730 [[image:1730864293216-991.png||height="739" width="1387"]]
731
732 Clear：
733
734 [[image:1730864331859-740.png||height="735" width="1385"]]
735
736 == 4.3 Rule chain configuration details ==
737
738 [[image:1730864784118-474.png]]
739
740 **Script：**Email configuration for sending device alarm information
741
742 [[image:1730864676542-406.png||height="732" width="1384"]]
743
744 {{code language="none"}}
745 function locatime(timenumber){
746 var date = new Date(timenumber)
747 return date.toLocaleDateString() + ' ' + date.toLocaleTimeString()
748 }
749 var name = msg.name
750 var devicename = msg.originatorName
751 var label = msg.originatorLabel
752 var status = msg.status
753 var detaildata =JSON.parse(msg.details.data)
754 var tempswitch
755
756 if (name != "Device Disconnected") {
757 //detaildata=JSON.parse(msg.details.data)
758 if (detaildata.Temperature_alarm_switch == true) {
759 tempswitch = "open"
760 } else {
761 tempswitch = "close"
762 }
763 var humswitch
764 if (detaildata.Humidity_alarm_switch == true) {
765 humswitch = "open"
766 } else {
767 humswitch = "close"
768 }
769 var batswitch
770 if (detaildata.Voltage_alarm_switch == true) {
771 batswitch = "open"
772 } else {
773 batswitch = "close"
774 }
775 var str2 = "<p>-- Temperature alarm switch status: " +
776 tempswitch + "</p>" +
777 "<p>-- Humidity alarm switch status: " + humswitch +
778 "</p>" +
779 "<p>-- Voltage alarm switch status: " + batswitch
780 }
781
782 if (name == "High Temperature" && status ==
783 "ACTIVE_UNACK") {
784 var emailstr =
785 "<div><p><span style='color: black; font-weight: bold'>" +
786 "Device " + label + " has alarm:</span></p>" +
787 "<p><span style='color: red; font-weight: bold'>-- High Temperature Alarm</span></p>" +
788 "<p>-- Current Temperature : " + detaildata
789 .TempC_SHT + "</p><br>" +
790 "<p>Device Configure:</p>" +
791 "<p>-- Temperature Threshold : min: " + detaildata
792 .Low_temperature_alarm + ", max: " + detaildata
793 .High_temperature_alarm + "</p>" +
794 "<p>-- Humidity Threshold: min: " + detaildata
795 .Low_humidity_alarm + ", max:" + detaildata
796 .High_humidity_alarm + "</p>" +
797 "<p>-- Battery threshold: min: " + detaildata
798 .Low_voltage_alarm + "</p>" + str2 + "</div>"
799 return {
800 msg: {
801 "data": emailstr
802 },
803 metadata: metadata,
804 msgType: msgType
805 };
806 } else if (name == "Low Temperature" && status ==
807 "ACTIVE_UNACK") {
808 var emailstr =
809 "<div><p><span style='color: black; font-weight: bold'>" +
810 "Device " + label + " has alarm:</span></p>" +
811 "<p><span style='color: red; font-weight: bold'>-- Low Temperature Alarm</span></p>" +
812 "<p>-- Current Temperature : " + detaildata
813 .TempC_SHT + "</p><br>" +
814 "<p>Device Configure:</p>" +
815 "<p>-- Temperature Threshold : min: " + detaildata
816 .Low_temperature_alarm + ", max: " + detaildata
817 .High_temperature_alarm + "</p>" +
818 "<p>-- Humidity Threshold: min: " + detaildata
819 .Low_humidity_alarm + ", max:" + detaildata
820 .High_humidity_alarm + "</p>" +
821 "<p>-- Battery threshold: min: " + detaildata
822 .Low_voltage_alarm + "</p>" + str2 + "</div>"
823
824 return {
825 msg: {
826 "data": emailstr
827 },
828 metadata: metadata,
829 msgType: msgType
830 };
831
832 } else if (name == "Device Disconnected" && status ==
833 "ACTIVE_UNACK") {
834 var time1 = locatime(Number(detaildata.lastActivityTime))
835 //var time1 = detaildata.lastActivityTime
836 // var chazhi = parseInt((detaildata.inactivityAlarmTime-detaildata.lastActivityTime)/1000/60)
837 // var emailstr =
838 // "<div><p><span style='color: red; font-weight: bold'>" +
839 // "Device " + label + " has Alarm</span></p><p>Last activity time: "+time1+"</p><p>Last Uplink: 21"+"minutes ago</p></div>"
840
841 var emailstr ="Device " + label + " has Alarm##Last activity time: "+time1+"##Last Uplink: 21minutes ago"
842 var newType = "POST_TELEMETRY_REQUEST"
843 return {
844 msg:emailstr,
845 metadata: metadata,
846 msgType: newType
847 }
848 } else if (name == "High humidity" && status ==
849 "ACTIVE_UNACK") {
850 var emailstr =
851 "<div><p><span style='color: black; font-weight: bold'>" +
852 "Device " + label + " has alarm:</span></p>" +
853 "<p><span style='color: red; font-weight: bold'>-- High Humidity Alarm</span></p>" +
854 "<p>-- Current Temperature : " + detaildata
855 .Hum_SHT + "</p><br>" +
856 "<p>Device Configure:</p>" +
857 "<p>-- Temperature Threshold : min: " + detaildata
858 .Low_temperature_alarm + ", max: " + detaildata
859 .High_temperature_alarm + "</p>" +
860 "<p>-- Humidity Threshold: min: " + detaildata
861 .Low_humidity_alarm + ", max:" + detaildata
862 .High_humidity_alarm + "</p>" +
863 "<p>-- Battery threshold: min: " + detaildata
864 .Low_voltage_alarm + "</p>" + str2 + "</div>"
865
866 return {
867 msg: {
868 "data": emailstr
869 },
870 metadata: metadata,
871 msgType: msgType
872 };
873 } else if (name == "Low humidity" && status ==
874 "ACTIVE_UNACK") {
875 var emailstr =
876 "<div><p><span style='color: black; font-weight: bold'>" +
877 "Device " + label + " has alarm:</span></p>" +
878 "<p><span style='color: red; font-weight: bold'>-- Low Humidity Alarm</span></p>" +
879 "<p>-- Current Temperature : " + detaildata
880 .Hum_SHT + "</p><br>" +
881 "<p>Device Configure:</p>" +
882 "<p>-- Temperature Threshold : min: " + detaildata
883 .Low_temperature_alarm + ", max: " + detaildata
884 .High_temperature_alarm + "</p>" +
885 "<p>-- Humidity Threshold: min: " + detaildata
886 .Low_humidity_alarm + ", max:" + detaildata
887 .High_humidity_alarm + "</p>" +
888 "<p>-- Battery threshold: min: " + detaildata
889 .Low_voltage_alarm + "</p>" + str2 + "</div>"
890
891 return {
892 msg: {
893 "data": emailstr
894 },
895 metadata: metadata,
896 msgType: msgType
897 };
898 } else if (name == "Low voltage" && status ==
899 "ACTIVE_UNACK") {
900 var emailstr =
901 "<div><p><span style='color: black; font-weight: bold'>" +
902 "Device " + label + " has alarm:</span></p>" +
903 "<p><span style='color: red; font-weight: bold'>-- Low Voltage Alarm</span></p>" +
904 "<p>-- Current Temperature : " + detaildata.BatV +
905 "</p><br>" +
906 "<p>Device Configure:</p>" +
907 "<p>-- Temperature Threshold : min: " + detaildata
908 .Low_temperature_alarm + ", max: " + detaildata
909 .High_temperature_alarm + "</p>" +
910 "<p>-- Humidity Threshold: min: " + detaildata
911 .Low_humidity_alarm + ", max:" + detaildata
912 .High_humidity_alarm + "</p>" +
913 "<p>-- Battery threshold: min: " + detaildata
914 .Low_voltage_alarm + "</p>" + str2 + "</div>"
915
916 return {
917 msg: {
918 "data": emailstr
919 },
920 metadata: metadata,
921 msgType: msgType
922 };
923 } else if (name == "High Temperature" && status ==
924 "CLEARED_UNACK") {
925 var emailstr =
926 "<div><p><span style='color: green; font-weight: bold'>Device " +
927 label +
928 " High Temperature Alarm Cleared</span></p>" +
929 "<p>-- Current Temperature : " + detaildata
930 .TempC_SHT + "</p><br>" +
931 "<p>Device Configure:</p>" +
932 "<p>-- Temperature Threshold : min: " + detaildata
933 .Low_temperature_alarm + ", max: " + detaildata
934 .High_temperature_alarm + "</p>" +
935 "<p>-- Humidity Threshold: min: " + detaildata
936 .Low_humidity_alarm + ", max:" + detaildata
937 .High_humidity_alarm + "</p>" +
938 "<p>-- Battery threshold: min: " + detaildata
939 .Low_voltage_alarm + "</p>" + str2 + "</div>"
940
941 return {
942 msg: {
943 "data": emailstr
944 },
945 metadata: metadata,
946 msgType: msgType
947 };
948 } else if (name == "Low Temperature" && status ==
949 "CLEARED_UNACK") {
950 var emailstr =
951 "<div><p><span style='color: green; font-weight: bold'>Device " +
952 label +
953 " Low Temperature Alarm Cleared</span></p>" +
954 "<p>-- Current Temperature : " + detaildata
955 .TempC_SHT + "</p><br>" +
956 "<p>Device Configure:</p>" +
957 "<p>-- Temperature Threshold : min: " + detaildata
958 .Low_temperature_alarm + ", max: " + detaildata
959 .High_temperature_alarm + "</p>" +
960 "<p>-- Humidity Threshold: min: " + detaildata
961 .Low_humidity_alarm + ", max:" + detaildata
962 .High_humidity_alarm + "</p>" +
963 "<p>-- Battery threshold: min: " + detaildata
964 .Low_voltage_alarm + "</p>" + str2 + "</div>"
965
966 return {
967 msg: {
968 "data": emailstr
969 },
970 metadata: metadata,
971 msgType: msgType
972 };
973 } else if (name == "High humidity" && status ==
974 "CLEARED_UNACK") {
975 var emailstr =
976 "<div><p><span style='color: green; font-weight: bold'>Device " +
977 label + " High Humidity Alarm Cleared</span></p>" +
978 "<p>-- Current Temperature : " + detaildata
979 .Hum_SHT + "</p><br>" +
980 "<p>Device Configure:</p>" +
981 "<p>-- Temperature Threshold : min: " + detaildata
982 .Low_temperature_alarm + ", max: " + detaildata
983 .High_temperature_alarm + "</p>" +
984 "<p>-- Humidity Threshold: min: " + detaildata
985 .Low_humidity_alarm + ", max:" + detaildata
986 .High_humidity_alarm + "</p>" +
987 "<p>-- Battery threshold: min: " + detaildata
988 .Low_voltage_alarm + "</p>" + str2 + "</div>"
989
990 return {
991 msg: {
992 "data": emailstr
993 },
994 metadata: metadata,
995 msgType: msgType
996 };
997 } else if (name == "Low humidity" && status ==
998 "CLEARED_UNACK") {
999 var emailstr =
1000 "<div><p><span style='color: green; font-weight: bold'>Device " +
1001 label + " Low Humidity Alarm Cleared</span></p>" +
1002 "<p>-- Current Temperature : " + detaildata
1003 .Hum_SHT + "</p><br>" +
1004 "<p>Device Configure:</p>" +
1005 "<p>-- Temperature Threshold : min: " + detaildata
1006 .Low_temperature_alarm + ", max: " + detaildata
1007 .High_temperature_alarm + "</p>" +
1008 "<p>-- Humidity Threshold: min: " + detaildata
1009 .Low_humidity_alarm + ", max:" + detaildata
1010 .High_humidity_alarm + "</p>" +
1011 "<p>-- Battery threshold: min: " + detaildata
1012 .Low_voltage_alarm + "</p>" + str2 + "</div>"
1013 return {
1014 msg: {
1015 "data": emailstr
1016 },
1017 metadata: metadata,
1018 msgType: msgType
1019 };
1020 } else if (name == "Low voltage" && status ==
1021 "CLEARED_UNACK") {
1022
1023 var emailstr =
1024 "<div><p><span style='color: green; font-weight: bold'>Device " +
1025 label + " Low Voltage Alarm Cleared</span></p>" +
1026 "<p>-- Current Temperature : " + detaildata.BatV +
1027 "</p><br><br>" +
1028 "<p>Device Configure:</p>" +
1029 "<p>-- Temperature Threshold : min: " + detaildata
1030 .Low_temperature_alarm + ", max: " + detaildata
1031 .High_temperature_alarm + "</p>" +
1032 "<p>-- Humidity Threshold: min: " + detaildata
1033 .Low_humidity_alarm + ", max:" + detaildata
1034 .High_humidity_alarm + "</p>" +
1035 "<p>-- Battery threshold: min: " + detaildata
1036 .Low_voltage_alarm + "</p>" + str2 + "</div>"
1037
1038 return {
1039 msg: {
1040 "data": emailstr
1041 },
1042 metadata: metadata,
1043 msgType: msgType
1044 };
1045 } else if (name == "Device Disconnected" && status ==
1046 "CLEARED_UNACK") {
1047 var time1 = locatime(Number(detaildata.lastActivityTime))
1048 //var time1 = detaildata.lastActivityTime
1049 // var chazhi = parseInt((detaildata.inactivityAlarmTime-detaildata.lastActivityTime)/1000/60)
1050 // var emailstr =
1051 // "<div><p><span style='color: green; font-weight: bold'>" +
1052 // "Device " + label + " has Alarm Cleared</span></p><p>Last activity time: "+time1+"</p></div>"
1053 var emailstr ="Device " + label + " has Alarm Cleared##Last activity time: "+time1
1054 var newType = "POST_TELEMETRY_REQUEST"
1055 return {
1056 msg: emailstr,
1057 metadata: metadata,
1058 msgType: newType
1059 }
1060 }
1061 {{/code}}
1062
1063 (% class="wikigeneratedid" %)
1064 **Generate Report：**
1065
1066 (% class="wikigeneratedid" %)
1067 [[image:1730865053380-293.png]]
1068
1069 = 5.other =
1070
1071 * If you want to create a similar dashboard, after understanding the case, you can download and import the dashboard, device profiles, rule chains, etc. of the case on GitHub, and make modifications based on them.
1072 * GitHub address：[[https:~~/~~/github.com/ThingsEye-io/te-platform/tree/main/case/Dragino%20Office%20%26%20Factory>>https://github.com/ThingsEye-io/te-platform/tree/main/case/Dragino%20Office%20%26%20Factory]]