Wiki source code of Demo for Smart Office, Factory

Version 63.1 by Hera Guo on 2024/11/07 10:24
Show last authors
1 **Table of Contents:**
2
3 {{toc/}}
4
5
6
7
8
9
10
11 = 1. About this demo =
12
13 This demo is to show the installation for various sensors in Dragino Office, Dragino Facotry & ThingsEye Office. It covers various types of sensors such as Temperature, Humidity, CO2, Water Flow, Vibration & many many.
14
15 User can check this [[Public Share Link>>https://thingseye.io/dashboard/d17f70f0-6b5f-11ef-a329-6fb88c149adb?publicId=33180810-5c40-11ef-a329-6fb88c149adb ]] and see the dash board for this demo. The dash board keeps updating, while the main structure will keep the same. It has **Three Level DashBoard **as decribe below.
16
17 * **First Level - Overview for all branches**: This dashboard shows all branches overview status and location.
18 * **Second Level - Branch Level**: This dashboard shows all sensors installation and status in the selected branch.
19 * **Third Level - Sensor Level**: This dashboard shows the detail reading for a specify sensor
20
21 [[image:Level1.png||height="133" width="298"]] [[image:Arrow.png||height="27" width="51"]] [[image:Level2.png||height="134" width="264"]][[image:Arrow.png||height="27" width="51"]] [[image:2024-09-26 23-47-06.png||height="130" width="256"]]
22
23
24 The rest of this chapter will provide the introduction for how to set up similiar solution.
25
26
27 = 2.Basic configuration instructions =
28
29 When you start a complex IoT project, you first need to learn some basic configuration methods for ThingsEye.
30
31 Here are some instructions you need to know：
32
33 Dashboard creation and some basic configurations:[[https:~~/~~/wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20import%20and%20use%20the%20dashboard%3F/#H3.2.2.1CreatA0alarm>>https://wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20import%20and%20use%20the%20dashboard%3F/#H3.2.2.1CreatA0alarm]]
34
35 Rule chain creation:[[https:~~/~~/wiki.thingseye.io/xwiki/bin/view/Main/Basic%20configuration%20of%20rule%20chains>>https://wiki.thingseye.io/xwiki/bin/view/Main/Basic%20configuration%20of%20rule%20chains/]]
36
37 Devices connected to thingseye：[[https:~~/~~/wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20connect%20my%20devices%20to%20ThingsEye%3F/>>https://wiki.thingseye.io/xwiki/bin/view/Main/How%20to%20connect%20my%20devices%20to%20ThingsEye%3F/]]
38
39 = 3.overview =
40
41 == 3.1 MHierarchical architectureore features ==
42
43 Before we start a project, we first need to understand the organizational structure of the project. Only with a clear outline can our project construction process be smoother
44
45 **Assets：**Dragino Office  、Dragino Factory
46
47 **Devices：**
48
49 Dragino Factory：temperature and humidity measurement×7、Gateway×1
50
51 Dragino Office：temperature and humidity measurement×2、Air quality measurement×4
52
53 == 3.2 Dashboard architecture ==
54
55 In this demo, the dashboard is divided into three layers, namely: home page, asset, and device.
56
57 **home page:**It includes three parts: map, asset list, and all alarm. From this interface, you can see how many factories, offices, and so on there are
58
59 **asset:**It includes three parts: asset map, device list, and asset alarm. From this interface, you can see how many sensors are deployed in the office or project, where they are located, and their alarm status
60
61 **device:**This section displays the specific information collected by the device, and different types of sensors have different display interfaces
62
63 [[image:屏幕截图 2024-11-04 134645.png]]
64
65 First floor：
66
67 [[image:1730702565889-204.png||height="771" width="1445"]]
68
69 Second floor：
70
71 [[image:1730702622551-808.png||height="756" width="1450"]]
72
73 Third floor：
74
75 [[image:1730702656725-496.png||height="775" width="1455"]]
76
77 [[image:1730702814435-805.png||height="797" width="1458"]]
78
79
80 [[image:1730702688377-367.png||height="770" width="1462"]]
81
82 * How many types of devices do you need, how many layers of third level dashboards you need to create.
83
84 == 3.3 Alarm rules ==
85
86 High Temperature、Low Temperature、High humidity、Low humidity、Low voltage、Device Disconnected
87
88 [[image:屏幕截图 2024-11-04 135045.png]]
89
90 = 4.configuration details =
91
92 After understanding the architecture and layering of the complete project, we can start configuring it
93
94 == 4.1 Dashboard configuration details ==
95
96 === 4.1.1.Data source (Entity aliases) ===
97
98 detail:Obtain data based on dashboard status
99
100 [[image:1730709424998-915.png||height="729" width="1436"]]
101
102 Alarm:Obtain alarm information
103
104 [[image:1730709479828-595.png||height="696" width="1435"]]
105
106 Dragino&GXHL,Ltd:Obtain data through asset types
107
108 [[image:1730709511861-439.png||height="714" width="1435"]]
109
110 Selected Supermarket:Retrieve devices by device type
111
112 [[image:1730709527720-418.png||height="751" width="1433"]]
113
114 Supermarket Devices:Obtain data through device type
115
116 [[image:1730709555797-383.png||height="726" width="1434"]]
117
118 LHT65N Device：Obtain data based on device type
119
120 [[image:1730857191863-514.png||height="725" width="1433"]]
121
122 === 4.1.2.Page Configuration ===
123
124 ==== 4.1.2.1、Configure the interface of the third layer Davies. ====
125
126 ==== 4.1.2.2、Configure the interface of the second layer asset ====
127
128 ===== 4.1.2.2.1 Equipment distribution diagram： =====
129
130 **Data：**
131
132 [[image:1730770392454-317.png||height="745" width="1439"]]
133
134 **Appearannce：**In this module, we need to arrange our devices in the corresponding positions and use icons to display our devices. Therefore, in the Appearance interface, we need to configure them
135
136 **Tooltip function：**This module displays the current information of the device
137
138 [[image:1730857537965-184.png]]
139
140 {{code language="none"}}
141 var msg = data
142 if(msg.Label=="gateway" && msg.type == "gateway"){
143 var stauts
144 if (msg.gatewaystauts=="true"){
145 stauts = "Connect"
146 }
147 else{
148 stauts = "Disconnected"
149 }
150 var str = "<b>"+msg.entityName+"</b><br/><b>"+stauts+"</b><br/>"
151 return str
152 }
153 else if(msg.type=="gxhl01" && msg.Label!="gateway"){
154 var str = "<b>"+msg.entityName+"</b><br/><b>"+msg.Label+"</b><br/><b>Bat:</b>"+msg.BatV+"V<br/><b>Temperature:</b>"+ msg.TempC_SHT+ "°C<br/><b>Humidity:</b>"+msg.Hum_SHT+"%"
155 return str
156 }
157 else{
158 var str = "<b>"+msg.entityName+"</b><br/><b>"+msg.Label+"</b><br/><b>Bat:</b>"+msg.BatV+"V<br/><b>Temperature:</b>"+ msg.temperature+ "°C<br/><b>Humidity:"+msg.humidity+"%"+"</b><br/>"+
159 "<b>Co2:"+msg.co2+"</b></br><b>Air_Pressure:"+msg.air_pressure
160
161 return str
162 }
163 {{/code}}
164
165 (% class="wikigeneratedid" id="HMarkerimagefunctionFF1A" %)
166 **Marker image function：**This module can display different icons based on different types of sensors and their status to achieve its functionality
167
168 (% class="wikigeneratedid" %)
169 [[image:1730857750749-240.png]]
170
171 {{code language="none"}}
172 var res
173 var msg = data
174 if(msg.Label=="gateway" && msg.type=="gateway"){
175 if (msg.gatewaystauts == "true"){
176 res = {
177 url: images[3],
178 size: 40
179 }
180 }
181 else{
182 res = {
183 url: images[2],
184 size: 40
185 }
186 }}
187 else if(msg.Label!="gateway" && msg.type=="gxhl01" ){
188 if (msg.active=="false"){
189 res = {
190 url: images[1],
191 size: 40
192 }}
193 else{
194 res = {
195 url: images[0],
196 size: 40
197 }
198 }
199 }
200 else if(msg.type=="LWL02"){
201 if (msg.WATER_LEAK_STATUS=="0"){
202 res = {
203 url: images[6],
204 size: 40
205 }}
206 else{
207 res = {
208 url: images[7],
209 size: 40
210 }
211 }
212 }
213 else if(msg.type=="LDS02"){
214 if (msg.DOOR_OPEN_STATUS=="0"){
215 res = {
216 url: images[5],
217 size: 40
218 }}
219 else{
220 res = {
221 url: images[8],
222 size: 40
223 }
224 }
225 }
226 else if(msg.type=="LDS12"){
227 res = {
228 url: images[10],
229 size: 40
230 }}
231 else if(msg.type=="SE01"){
232 res = {
233 url: images[9],
234 size: 40
235 }}
236 else if(msg.type=="PB01"){
237 res = {
238 url: images[11],
239 size: 40
240 }}
241 else if(msg.type=="S31b"){
242 res = {
243 url: images[12],
244 size: 40
245 }}
246 else if(msg.type=="LHT65N"){
247 res = {
248 url: images[13],
249 size: 40
250 }}
251 else{
252 res = {
253 url: images[4],
254 size: 40
255 }
256 }
257 return res;
258 {{/code}}
259
260 (% class="wikigeneratedid" %)
261 [[image:1730770875793-351.png||height="799" width="1474"]]
262
263 (% class="wikigeneratedid" %)
264 **Actions:**We need to implement the function of entering the details interface through the corresponding device icon, so in this module, we need to add actions to achieve redirection
265
266 {{code language="none"}}
267 var entitySubType;
268 var $injector = widgetContext.$scope.$injector;
269 $injector.get(widgetContext.servicesMap.get('entityService')).getEntity(entityId.entityType, entityId.id)
270 .subscribe(function(data) {
271 entitySubType = data.type;
272 console.log(entitySubType)
273 if (entitySubType == 'gateway') {
274 openDashboardStates('gateway_detail');
275 } else if (entitySubType == 'gxhl01') {
276 openDashboardStates('detail');
277 }
278 else if(entitySubType == 'AQS01-dragino-office'){
279 openDashboardStates("aqs01_detail")
280 }
281 else if (entitySubType == 'LDS12') {
282 openDashboardStates('lds12_detail');
283 }
284 else if (entitySubType == 'LDS02') {
285 openDashboardStates('lds02_detail');
286 }
287 else if (entitySubType == 'SE01') {
288 openDashboardStates('se01_detail');
289 }
290 else if (entitySubType == 'PB01') {
291 openDashboardStates('pb01_detail');
292 }
293 else if (entitySubType == 'LWL02') {
294 openDashboardStates('lwl02_detail');
295 }
296 else if (entitySubType == 'LPS8N') {
297 openDashboardStates('lps8n_detail');
298 }
299 else if (entitySubType == 'LHT65N') {
300 openDashboardStates('lht65n_detail');
301 }
302 else if (entitySubType == 'S31b') {
303 openDashboardStates('s31b_detail');
304 }
305 });
306
307 function openDashboardStates(statedId) {
308 var stateParams = widgetContext.stateController.getStateParams();
309 var params = {
310 entityId: entityId,
311 entityName: entityName
312 };
313
314 if (stateParams.city) {
315 params.city = stateParams.city;
316 }
317
318 widgetContext.stateController.openState(statedId, params, false);
319 }
320
321 {{/code}}
322
323 [[image:1730771103096-522.png||height="815" width="1503"]]
324
325 ===== 4.1.2.2.2 Device List =====
326
327 (% class="wikigeneratedid" id="HDataFF1A" %)
328 **Data：**
329
330 [[image:1730771199343-553.png||height="802" width="1501"]]
331
332 **Actions：**Equipment distribution diagram: In this module, functions need to be implemented such as adding devices, editing devices, deleting devices, and jumping to the device details page. Therefore, the following actions need to be added:
333
334 [[image:1730771228766-212.png]]
335
336 (% class="wikigeneratedid" id="HEditdeviceFF1A" %)
337 **Edit device：**Implementation function: Device editing
338
339 [[image:1730771256045-238.png]]
340
341 {{code language="none"}}
342 let $injector = widgetContext.$scope.$injector;
343 let customDialog = $injector.get(widgetContext.servicesMap.get('customDialog'));
344 let deviceService = $injector.get(widgetContext.servicesMap.get('deviceService'));
345 let attributeService = $injector.get(widgetContext.servicesMap.get('attributeService'));
346
347 openEditDeviceDialog();
348
349 function openEditDeviceDialog() {
350 customDialog.customDialog(htmlTemplate, EditDeviceDialogController).subscribe();
351 }
352
353 function EditDeviceDialogController(instance) {
354 let vm = instance;
355
356 vm.device = null;
357 vm.attributes = {};
358
359 vm.editDeviceFormGroup = vm.fb.group({
360 deviceName: ['', [vm.validators.required]],
361 deviceType: ['', [vm.validators.required]],
362 deviceLabel: [''],
363 attributes: vm.fb.group({
364 latitude: [null],
365 longitude: [null]
366 })
367 });
368
369 vm.cancel = function() {
370 vm.dialogRef.close(null);
371 };
372
373 vm.save = function() {
374 vm.editDeviceFormGroup.markAsPristine();
375 if (vm.editDeviceFormGroup.get('deviceType').value !== vm.device.type) {
376 delete vm.device.deviceProfileId;
377 }
378 vm.device.name = vm.editDeviceFormGroup.get('deviceName').value,
379 vm.device.type = vm.editDeviceFormGroup.get('deviceType').value,
380 vm.device.label = vm.editDeviceFormGroup.get('deviceLabel').value
381 deviceService.saveDevice(vm.device).subscribe(
382 function () {
383 saveAttributes().subscribe(
384 function () {
385 widgetContext.updateAliases();
386 vm.dialogRef.close(null);
387 }
388 );
389 }
390 );
391 };
392
393 getEntityInfo();
394
395 function getEntityInfo() {
396 deviceService.getDevice(entityId.id).subscribe(
397 function (device) {
398 attributeService.getEntityAttributes(entityId, 'SERVER_SCOPE',
399 ['latitude', 'longitude']).subscribe(
400 function (attributes) {
401 for (let i = 0; i < attributes.length; i++) {
402 vm.attributes[attributes[i].key] = attributes[i].value;
403 }
404 vm.device = device;
405 vm.editDeviceFormGroup.patchValue(
406 {
407 deviceName: vm.device.name,
408 deviceType: vm.device.type,
409 deviceLabel: vm.device.label,
410 attributes: {
411 latitude: vm.attributes.latitude,
412 longitude: vm.attributes.longitude
413 }
414 }, {emitEvent: false}
415 );
416 }
417 );
418 }
419 );
420 }
421
422 function saveAttributes() {
423 let attributes = vm.editDeviceFormGroup.get('attributes').value;
424 let attributesArray = [];
425 for (let key in attributes) {
426 attributesArray.push({key: key, value: attributes[key]});
427 }
428 if (attributesArray.length > 0) {
429 return attributeService.saveEntityAttributes(entityId, 'SERVER_SCOPE', attributesArray);
430 } else {
431 return widgetContext.rxjs.of([]);
432 }
433 }
434 }
435 {{/code}}
436
437 **Delete device：**Implementation function: Device deletion
438
439 [[image:1730771318657-502.png]]
440
441 {{code language="none"}}
442 let $injector = widgetContext.$scope.$injector;
443 let dialogs = $injector.get(widgetContext.servicesMap.get('dialogs'));
444 let deviceService = $injector.get(widgetContext.servicesMap.get('deviceService'));
445
446 openDeleteDeviceDialog();
447
448 function openDeleteDeviceDialog() {
449 let title = "Are you sure you want to delete the device " + entityName + "?";
450 let content = "Be careful, after the confirmation, the device and all related data will become unrecoverable!";
451 dialogs.confirm(title, content, 'Cancel', 'Delete').subscribe(
452 function (result) {
453 if (result) {
454 deleteDevice();
455 }
456 }
457 );
458 }
459
460 function deleteDevice() {
461 deviceService.deleteDevice(entityId.id).subscribe(
462 function () {
463 widgetContext.updateAliases();
464 }
465 );
466 }
467
468 {{/code}}
469
470 **jump:I**mplementation function: Jump to the device details page
471
472 [[image:1730771386258-676.png]]
473
474 {{code language="none"}}
475 console.log(entityName)
476 var entitySubType;
477 var $injector = widgetContext.$scope.$injector;
478 //console.log($injector)
479 $injector.get(widgetContext.servicesMap.get('entityService')).getEntity(entityId.entityType, entityId.id)
480 .subscribe(function(data) {
481 console.log(data)
482 entitySubType = data.type;
483 console.log(entitySubType)
484 if (entitySubType == 'AQS01-dragino-office') {
485 openDashboardStates('aqs01_detail');
486 }else if (entitySubType == 'gateway') {
487 openDashboardStates('gateway_detail');
488 } else if (entitySubType == 'gxhl01') {
489 openDashboardStates('detail');
490
491 } else if (entitySubType == 'tank-type1') {
492 openDashboardStates('test1');
493 }
494 else if (entitySubType == 'LDS12') {
495 openDashboardStates('lds12_detail');
496 }
497 else if (entitySubType == 'LDS02') {
498 openDashboardStates('lds02_detail');
499 }
500 else if (entitySubType == 'SE01') {
501 openDashboardStates('se01_detail');
502 }
503 else if (entitySubType == 'PB01') {
504 openDashboardStates('pb01_detail');
505 }
506 else if (entitySubType == 'LWL02') {
507 openDashboardStates('lwl02_detail');
508 }
509 else if (entitySubType == 'LPS8N') {
510 openDashboardStates('lps8n_detail');
511 }
512 else if (entitySubType == 'LHT65N') {
513 openDashboardStates('lht65n_detail');
514 }
515 else if (entitySubType == 'S31b') {
516 openDashboardStates('s31b_detail');
517 }
518 });
519
520 function openDashboardStates(statedId) {
521 var stateParams = widgetContext.stateController.getStateParams();
522 //console.log(stateParams)
523 var params = {
524 entityId: entityId,
525 entityName: entityName
526 };
527 widgetContext.stateController.updateState(statedId, params, false);
528 }
529 {{/code}}
530
531 (% class="wikigeneratedid" id="H-1" %)
532 **Add device：**Implementation function: Add device
533
534 [[image:1730771441589-122.png]]
535
536 {{code language="none"}}
537 let $injector = widgetContext.$scope.$injector;
538 let customDialog = $injector.get(widgetContext.servicesMap.get('customDialog'));
539 let deviceService = $injector.get(widgetContext.servicesMap.get('deviceService'));
540 let attributeService = $injector.get(widgetContext.servicesMap.get('attributeService'));
541
542 openAddDeviceDialog();
543
544 function openAddDeviceDialog() {
545 customDialog.customDialog(htmlTemplate, AddDeviceDialogController).subscribe();
546 }
547
548 function AddDeviceDialogController(instance) {
549 let vm = instance;
550
551 vm.addDeviceFormGroup = vm.fb.group({
552 deviceName: ['', [vm.validators.required]],
553 deviceType: ['', [vm.validators.required]],
554 deviceLabel: [''],
555 attributes: vm.fb.group({
556 latitude: [null],
557 longitude: [null]
558 })
559 });
560
561 vm.cancel = function() {
562 vm.dialogRef.close(null);
563 };
564
565 vm.save = function() {
566 vm.addDeviceFormGroup.markAsPristine();
567 let device = {
568 name: vm.addDeviceFormGroup.get('deviceName').value,
569 type: vm.addDeviceFormGroup.get('deviceType').value,
570 label: vm.addDeviceFormGroup.get('deviceLabel').value
571 };
572 deviceService.saveDevice(device).subscribe(
573 function (device) {
574 saveAttributes(device.id).subscribe(
575 function () {
576 widgetContext.updateAliases();
577 vm.dialogRef.close(null);
578 }
579 );
580 }
581 );
582 };
583
584 function saveAttributes(entityId) {
585 let attributes = vm.addDeviceFormGroup.get('attributes').value;
586 let attributesArray = [];
587 for (let key in attributes) {
588 attributesArray.push({key: key, value: attributes[key]});
589 }
590 if (attributesArray.length > 0) {
591 return attributeService.saveEntityAttributes(entityId, "SERVER_SCOPE", attributesArray);
592 } else {
593 return widgetContext.rxjs.of([]);
594 }
595 }
596 }
597 {{/code}}
598
599 ===== 4.1.2.2.3 Asset Alarm: =====
600
601 **Data:**
602
603 [[image:1730771504586-433.png||height="762" width="1431"]]
604
605 ==== (% id="cke_bm_373849S" style="display:none" %) (%%)4.1.2.3、Configure the first layer menu interface ====
606
607 ===== 4.1.2.3.1 Map: =====
608
609 **Data:**
610
611 [[image:1730710271230-716.png||height="729" width="1427"]]
612
613 **Actions**:The map interface has two actions, among which Select supermarket can refresh the device list and related alarms on the right side to enter the location, and Supermarket_detail can jump to the second level physical interface to view the details of the location based on the selected location
614
615 [[image:1730710850458-781.png||height="770" width="1429"]]
616
617 **Select supermarket:**Implementation function: Refresh the side page
618
619 {{code language="none"}}
620 var params = widgetContext.stateController.getStateParams();
621 var selectedSupermarket = params['selectedSupermarket'];
622 if (selectedSupermarket && selectedSupermarket.entityId.id === entityId.id) {
623 params['selectedSupermarket'] = null;
624 } else {
625 params['selectedSupermarket'] = { entityId: entityId, entityName: entityName, entityLabel: entityLabel };
626 }
627 widgetContext.stateController.updateState(null, params);
628 {{/code}}
629
630 [[image:1730710875401-848.png||height="767" width="1429"]]
631
632 **Supermarket_detail:**Implementation function: Jump to the asset details page
633
634 {{code language="none"}}
635 var params = JSON.parse(JSON.stringify(widgetContext.stateController.getStateParams()));
636 params['selectedSupermarket'] = {
637 entityId: entityId,
638 entityName: entityName,
639 entityLabel: entityLabel,
640 };
641 params['targetEntityParamName'] = 'selectedSupermarket';
642 params['selectedDevice'] = null;
643
644 widgetContext.stateController.openState('svgmap', params);
645 {{/code}}
646
647 [[image:1730710990334-601.png||height="772" width="1433"]]
648
649 * (((
650 In this demo, exclusive map icons were set as follows:
651 )))
652
653 {{code language="none"}}
654 var res = {
655 url: images[0],
656 size: 66
657 };
658 return res;
659 {{/code}}
660
661 [[image:1730710395303-672.png||height="771" width="1438"]]
662
663 ===== 4.1.2.3.2 Asset List: =====
664
665 **Data:**
666
667 [[image:1730710693066-349.png||height="772" width="1439"]]
668
669 **Actions:**The Assets List interface has an action, which is the same as the Supermarket_details in the Map. You can jump to the second level entity interface to view the details of the selected location based on its location
670
671 [[image:1730712335338-750.png||height="751" width="1423"]]
672
673 [[image:1730712473941-913.png||height="781" width="1422"]]
674
675 ===== 4.1.2.3.3 All Alarms: =====
676
677 [[image:1730712539209-554.png||height="764" width="1424"]]
678
679 == 4.2 Alarm configuration details ==
680
681 === 4.2.1 High temperature ===
682
683 Creat:
684
685 [[image:1730862483514-101.png||height="750" width="1407"]]
686
687 Clear:
688
689 [[image:1730862584519-902.png||height="758" width="1404"]]
690
691 === 4.2.2 Low Temperature ===
692
693 Creat:
694
695 [[image:1730863708259-750.png||height="752" width="1403"]]
696
697 Clear:
698
699 [[image:1730863750414-979.png||height="746" width="1403"]]
700
701 === 4.2.3 High humidity ===
702
703 Creat:
704
705 [[image:1730864045747-876.png||height="752" width="1396"]]
706
707 Clear:
708
709 [[image:1730864077395-395.png||height="735" width="1393"]]
710
711 === 4.2.4 Low humidity ===
712
713 Creat：
714
715 [[image:1730864117808-484.png||height="741" width="1392"]]
716
717 Clear：
718
719 [[image:1730864159071-895.png||height="745" width="1392"]]
720
721 === 4.2.5 Low voltage ===
722
723 Creat：
724
725 [[image:1730864207037-477.png||height="740" width="1388"]]
726
727 Clear：
728
729 [[image:1730864250506-111.png||height="735" width="1389"]]
730
731 === 4.2.6 Device Disconnected ===
732
733 Creat：
734
735 [[image:1730864293216-991.png||height="739" width="1387"]]
736
737 Clear：
738
739 [[image:1730864331859-740.png||height="735" width="1385"]]
740
741 == 4.3 Rule chain configuration details ==
742
743 [[image:1730864784118-474.png]]
744
745 **Script：**Email configuration for sending device alarm information
746
747 [[image:1730864676542-406.png||height="732" width="1384"]]
748
749 {{code language="none"}}
750 function locatime(timenumber){
751 var date = new Date(timenumber)
752 return date.toLocaleDateString() + ' ' + date.toLocaleTimeString()
753 }
754 var name = msg.name
755 var devicename = msg.originatorName
756 var label = msg.originatorLabel
757 var status = msg.status
758 var detaildata =JSON.parse(msg.details.data)
759 var tempswitch
760
761 if (name != "Device Disconnected") {
762 //detaildata=JSON.parse(msg.details.data)
763 if (detaildata.Temperature_alarm_switch == true) {
764 tempswitch = "open"
765 } else {
766 tempswitch = "close"
767 }
768 var humswitch
769 if (detaildata.Humidity_alarm_switch == true) {
770 humswitch = "open"
771 } else {
772 humswitch = "close"
773 }
774 var batswitch
775 if (detaildata.Voltage_alarm_switch == true) {
776 batswitch = "open"
777 } else {
778 batswitch = "close"
779 }
780 var str2 = "<p>-- Temperature alarm switch status: " +
781 tempswitch + "</p>" +
782 "<p>-- Humidity alarm switch status: " + humswitch +
783 "</p>" +
784 "<p>-- Voltage alarm switch status: " + batswitch
785 }
786
787 if (name == "High Temperature" && status ==
788 "ACTIVE_UNACK") {
789 var emailstr =
790 "<div><p><span style='color: black; font-weight: bold'>" +
791 "Device " + label + " has alarm:</span></p>" +
792 "<p><span style='color: red; font-weight: bold'>-- High Temperature Alarm</span></p>" +
793 "<p>-- Current Temperature : " + detaildata
794 .TempC_SHT + "</p><br>" +
795 "<p>Device Configure:</p>" +
796 "<p>-- Temperature Threshold : min: " + detaildata
797 .Low_temperature_alarm + ", max: " + detaildata
798 .High_temperature_alarm + "</p>" +
799 "<p>-- Humidity Threshold: min: " + detaildata
800 .Low_humidity_alarm + ", max:" + detaildata
801 .High_humidity_alarm + "</p>" +
802 "<p>-- Battery threshold: min: " + detaildata
803 .Low_voltage_alarm + "</p>" + str2 + "</div>"
804 return {
805 msg: {
806 "data": emailstr
807 },
808 metadata: metadata,
809 msgType: msgType
810 };
811 } else if (name == "Low Temperature" && status ==
812 "ACTIVE_UNACK") {
813 var emailstr =
814 "<div><p><span style='color: black; font-weight: bold'>" +
815 "Device " + label + " has alarm:</span></p>" +
816 "<p><span style='color: red; font-weight: bold'>-- Low Temperature Alarm</span></p>" +
817 "<p>-- Current Temperature : " + detaildata
818 .TempC_SHT + "</p><br>" +
819 "<p>Device Configure:</p>" +
820 "<p>-- Temperature Threshold : min: " + detaildata
821 .Low_temperature_alarm + ", max: " + detaildata
822 .High_temperature_alarm + "</p>" +
823 "<p>-- Humidity Threshold: min: " + detaildata
824 .Low_humidity_alarm + ", max:" + detaildata
825 .High_humidity_alarm + "</p>" +
826 "<p>-- Battery threshold: min: " + detaildata
827 .Low_voltage_alarm + "</p>" + str2 + "</div>"
828
829 return {
830 msg: {
831 "data": emailstr
832 },
833 metadata: metadata,
834 msgType: msgType
835 };
836
837 } else if (name == "Device Disconnected" && status ==
838 "ACTIVE_UNACK") {
839 var time1 = locatime(Number(detaildata.lastActivityTime))
840 //var time1 = detaildata.lastActivityTime
841 // var chazhi = parseInt((detaildata.inactivityAlarmTime-detaildata.lastActivityTime)/1000/60)
842 // var emailstr =
843 // "<div><p><span style='color: red; font-weight: bold'>" +
844 // "Device " + label + " has Alarm</span></p><p>Last activity time: "+time1+"</p><p>Last Uplink: 21"+"minutes ago</p></div>"
845
846 var emailstr ="Device " + label + " has Alarm##Last activity time: "+time1+"##Last Uplink: 21minutes ago"
847 var newType = "POST_TELEMETRY_REQUEST"
848 return {
849 msg:emailstr,
850 metadata: metadata,
851 msgType: newType
852 }
853 } else if (name == "High humidity" && status ==
854 "ACTIVE_UNACK") {
855 var emailstr =
856 "<div><p><span style='color: black; font-weight: bold'>" +
857 "Device " + label + " has alarm:</span></p>" +
858 "<p><span style='color: red; font-weight: bold'>-- High Humidity Alarm</span></p>" +
859 "<p>-- Current Temperature : " + detaildata
860 .Hum_SHT + "</p><br>" +
861 "<p>Device Configure:</p>" +
862 "<p>-- Temperature Threshold : min: " + detaildata
863 .Low_temperature_alarm + ", max: " + detaildata
864 .High_temperature_alarm + "</p>" +
865 "<p>-- Humidity Threshold: min: " + detaildata
866 .Low_humidity_alarm + ", max:" + detaildata
867 .High_humidity_alarm + "</p>" +
868 "<p>-- Battery threshold: min: " + detaildata
869 .Low_voltage_alarm + "</p>" + str2 + "</div>"
870
871 return {
872 msg: {
873 "data": emailstr
874 },
875 metadata: metadata,
876 msgType: msgType
877 };
878 } else if (name == "Low humidity" && status ==
879 "ACTIVE_UNACK") {
880 var emailstr =
881 "<div><p><span style='color: black; font-weight: bold'>" +
882 "Device " + label + " has alarm:</span></p>" +
883 "<p><span style='color: red; font-weight: bold'>-- Low Humidity Alarm</span></p>" +
884 "<p>-- Current Temperature : " + detaildata
885 .Hum_SHT + "</p><br>" +
886 "<p>Device Configure:</p>" +
887 "<p>-- Temperature Threshold : min: " + detaildata
888 .Low_temperature_alarm + ", max: " + detaildata
889 .High_temperature_alarm + "</p>" +
890 "<p>-- Humidity Threshold: min: " + detaildata
891 .Low_humidity_alarm + ", max:" + detaildata
892 .High_humidity_alarm + "</p>" +
893 "<p>-- Battery threshold: min: " + detaildata
894 .Low_voltage_alarm + "</p>" + str2 + "</div>"
895
896 return {
897 msg: {
898 "data": emailstr
899 },
900 metadata: metadata,
901 msgType: msgType
902 };
903 } else if (name == "Low voltage" && status ==
904 "ACTIVE_UNACK") {
905 var emailstr =
906 "<div><p><span style='color: black; font-weight: bold'>" +
907 "Device " + label + " has alarm:</span></p>" +
908 "<p><span style='color: red; font-weight: bold'>-- Low Voltage Alarm</span></p>" +
909 "<p>-- Current Temperature : " + detaildata.BatV +
910 "</p><br>" +
911 "<p>Device Configure:</p>" +
912 "<p>-- Temperature Threshold : min: " + detaildata
913 .Low_temperature_alarm + ", max: " + detaildata
914 .High_temperature_alarm + "</p>" +
915 "<p>-- Humidity Threshold: min: " + detaildata
916 .Low_humidity_alarm + ", max:" + detaildata
917 .High_humidity_alarm + "</p>" +
918 "<p>-- Battery threshold: min: " + detaildata
919 .Low_voltage_alarm + "</p>" + str2 + "</div>"
920
921 return {
922 msg: {
923 "data": emailstr
924 },
925 metadata: metadata,
926 msgType: msgType
927 };
928 } else if (name == "High Temperature" && status ==
929 "CLEARED_UNACK") {
930 var emailstr =
931 "<div><p><span style='color: green; font-weight: bold'>Device " +
932 label +
933 " High Temperature Alarm Cleared</span></p>" +
934 "<p>-- Current Temperature : " + detaildata
935 .TempC_SHT + "</p><br>" +
936 "<p>Device Configure:</p>" +
937 "<p>-- Temperature Threshold : min: " + detaildata
938 .Low_temperature_alarm + ", max: " + detaildata
939 .High_temperature_alarm + "</p>" +
940 "<p>-- Humidity Threshold: min: " + detaildata
941 .Low_humidity_alarm + ", max:" + detaildata
942 .High_humidity_alarm + "</p>" +
943 "<p>-- Battery threshold: min: " + detaildata
944 .Low_voltage_alarm + "</p>" + str2 + "</div>"
945
946 return {
947 msg: {
948 "data": emailstr
949 },
950 metadata: metadata,
951 msgType: msgType
952 };
953 } else if (name == "Low Temperature" && status ==
954 "CLEARED_UNACK") {
955 var emailstr =
956 "<div><p><span style='color: green; font-weight: bold'>Device " +
957 label +
958 " Low Temperature Alarm Cleared</span></p>" +
959 "<p>-- Current Temperature : " + detaildata
960 .TempC_SHT + "</p><br>" +
961 "<p>Device Configure:</p>" +
962 "<p>-- Temperature Threshold : min: " + detaildata
963 .Low_temperature_alarm + ", max: " + detaildata
964 .High_temperature_alarm + "</p>" +
965 "<p>-- Humidity Threshold: min: " + detaildata
966 .Low_humidity_alarm + ", max:" + detaildata
967 .High_humidity_alarm + "</p>" +
968 "<p>-- Battery threshold: min: " + detaildata
969 .Low_voltage_alarm + "</p>" + str2 + "</div>"
970
971 return {
972 msg: {
973 "data": emailstr
974 },
975 metadata: metadata,
976 msgType: msgType
977 };
978 } else if (name == "High humidity" && status ==
979 "CLEARED_UNACK") {
980 var emailstr =
981 "<div><p><span style='color: green; font-weight: bold'>Device " +
982 label + " High Humidity Alarm Cleared</span></p>" +
983 "<p>-- Current Temperature : " + detaildata
984 .Hum_SHT + "</p><br>" +
985 "<p>Device Configure:</p>" +
986 "<p>-- Temperature Threshold : min: " + detaildata
987 .Low_temperature_alarm + ", max: " + detaildata
988 .High_temperature_alarm + "</p>" +
989 "<p>-- Humidity Threshold: min: " + detaildata
990 .Low_humidity_alarm + ", max:" + detaildata
991 .High_humidity_alarm + "</p>" +
992 "<p>-- Battery threshold: min: " + detaildata
993 .Low_voltage_alarm + "</p>" + str2 + "</div>"
994
995 return {
996 msg: {
997 "data": emailstr
998 },
999 metadata: metadata,
1000 msgType: msgType
1001 };
1002 } else if (name == "Low humidity" && status ==
1003 "CLEARED_UNACK") {
1004 var emailstr =
1005 "<div><p><span style='color: green; font-weight: bold'>Device " +
1006 label + " Low Humidity Alarm Cleared</span></p>" +
1007 "<p>-- Current Temperature : " + detaildata
1008 .Hum_SHT + "</p><br>" +
1009 "<p>Device Configure:</p>" +
1010 "<p>-- Temperature Threshold : min: " + detaildata
1011 .Low_temperature_alarm + ", max: " + detaildata
1012 .High_temperature_alarm + "</p>" +
1013 "<p>-- Humidity Threshold: min: " + detaildata
1014 .Low_humidity_alarm + ", max:" + detaildata
1015 .High_humidity_alarm + "</p>" +
1016 "<p>-- Battery threshold: min: " + detaildata
1017 .Low_voltage_alarm + "</p>" + str2 + "</div>"
1018 return {
1019 msg: {
1020 "data": emailstr
1021 },
1022 metadata: metadata,
1023 msgType: msgType
1024 };
1025 } else if (name == "Low voltage" && status ==
1026 "CLEARED_UNACK") {
1027
1028 var emailstr =
1029 "<div><p><span style='color: green; font-weight: bold'>Device " +
1030 label + " Low Voltage Alarm Cleared</span></p>" +
1031 "<p>-- Current Temperature : " + detaildata.BatV +
1032 "</p><br><br>" +
1033 "<p>Device Configure:</p>" +
1034 "<p>-- Temperature Threshold : min: " + detaildata
1035 .Low_temperature_alarm + ", max: " + detaildata
1036 .High_temperature_alarm + "</p>" +
1037 "<p>-- Humidity Threshold: min: " + detaildata
1038 .Low_humidity_alarm + ", max:" + detaildata
1039 .High_humidity_alarm + "</p>" +
1040 "<p>-- Battery threshold: min: " + detaildata
1041 .Low_voltage_alarm + "</p>" + str2 + "</div>"
1042
1043 return {
1044 msg: {
1045 "data": emailstr
1046 },
1047 metadata: metadata,
1048 msgType: msgType
1049 };
1050 } else if (name == "Device Disconnected" && status ==
1051 "CLEARED_UNACK") {
1052 var time1 = locatime(Number(detaildata.lastActivityTime))
1053 //var time1 = detaildata.lastActivityTime
1054 // var chazhi = parseInt((detaildata.inactivityAlarmTime-detaildata.lastActivityTime)/1000/60)
1055 // var emailstr =
1056 // "<div><p><span style='color: green; font-weight: bold'>" +
1057 // "Device " + label + " has Alarm Cleared</span></p><p>Last activity time: "+time1+"</p></div>"
1058 var emailstr ="Device " + label + " has Alarm Cleared##Last activity time: "+time1
1059 var newType = "POST_TELEMETRY_REQUEST"
1060 return {
1061 msg: emailstr,
1062 metadata: metadata,
1063 msgType: newType
1064 }
1065 }
1066 {{/code}}
1067
1068 (% class="wikigeneratedid" %)
1069 **Generate Report：**
1070
1071 (% class="wikigeneratedid" %)
1072 [[image:1730865053380-293.png]]
1073
1074 = 5.other =
1075
1076 * If you want to create a similar dashboard, after understanding the case, you can download and import the dashboard, device profiles, rule chains, etc. of the case on GitHub, and make modifications based on them.
1077 * GitHub address：[[https:~~/~~/github.com/ThingsEye-io/te-platform/tree/main/case/Dragino%20Office%20%26%20Factory>>https://github.com/ThingsEye-io/te-platform/tree/main/case/Dragino%20Office%20%26%20Factory]]