Version 2.1 by Alec Chen on 2025/03/21 15:40
Show last authors
1 **Table of Contents:**
2
3
4
5 = **1. Introduction** =
6
7 == **1.1 What is ThingsEye Water Leakage &Doors Status Monitoring Solution？** ==
8
9 The ThingsEye Water Leakage & Doors Status Monitoring Solution is designed tohelpenterprises comply with national regulations and avoid fines.
10
11 By providing 24/7 monitoring of all security doors and pipelines in office buildings, factories, and other large facilities, it enables instant alerts in case of incidents. Asingledashboard allows full management of an entire building, significantly reducing operational costs and compliance risks.
12
13 Built on mature LoRa technology, our cost-effective devices offer wide signal coverageand support quick setup via scan-to-add functionality. With plug-and-play installation, deployment takes just 10 seconds. This minimizes device, operation, and maintenancecosts, making it the optimal monitoring solution for large buildings.
14
15
16 ----
17
18
19 == **1.2 Features** ==
20
21 * **Easy to Deploy   **
22 ** Plug-and-play gateway
23 ** Scan-to-add device onboarding
24 * **Collaborative Monitoring**
25 ** Interactive dashboard
26 ** Real-time alerts and notifications
27 * **High Precision Measurement**
28 ** High-accuracy sensors
29 ** Accurate telemetry data processing algorithms
30 * **Real-Time Monitoring**
31 ** Low power consumption, two batteries can run continuously for 3-5 years
32 ** Instant status alarms
33 * **User-Friendly**
34 ** Intuitive dashboard design
35 ** Customizable dashboard views
36
37
38 ----
39
40
41 == **1.3 Specifications** ==
42
43 * **Wireless Technology:** LoRa WAN, NB-IoT, LTE-M
44 * **Long Battery Life:** Operates for several years without maintenance
45 * ** Monitoring Parameters:** Doors status, water leakage
46 * **Data Storage:** 5 years of historical data
47 * ** Management:** Hierarchical structure for easy administration
48 * ** Device Onboarding: **Simple device addition for end-users
49 * ** Mobile Support:** Dedicated mobile app for on-the-go monitoring
50
51
52 ----
53
54
55 = **2. Dashboard detail** =
56
57 == **2.1 Dashboard interface example** ==
58
59 The dashboard provides an intuitive interface for real-time monitoring and control. Eachdevice has an icon below to mark what they are, it depends on which “Device Profile”you choose at creating.
60
61 [[image:1742541535331-679.png]]
62
63
64 **Door has three modes:** Open timeout, opened, and closed. They will display in red, orange, and green respectively.
65
66 **Water leakage has two mods:** Leaking and not leakage. They will display in red and green respectively.
67
68 **Battery: **The power is calculated based on the voltage, with both specific values ​​and icons, which is more intuitive.
69
70 [[image:1742541559319-209.png]]
71
72
73 ----
74
75
76 == **2.2 Detailed features** ==
77
78 Here is the button of device’s alarm detail. Comment of each device can be addhere.
79
80 [[image:1742541597075-388.png]]
81
82
83 Here are the device options, which will be described in detail in Chapter 4.
84
85 [[image:1742541637546-942.png]]
86
87
88 ----
89
90
91 = **3.How to Build a Water Leakage &Doors Status Monitoring Solution** =
92
93 == **3.1 Network structure** ==
94
95 Water Leakage & Doors Status Monitoring Structure
96
97 [[image:1742542091581-461.png]]
98
99
100 The network structure consists of end nodes and gateways, which work together to monitor doors and water pipes conditions in real time.
101
102
103 ----
104
105
106 == **3.2 Get Account** ==
107
108 To begin, contact your local representative to obtain a customer account on** ThingsEye.io**.
109
110
111 ----
112
113
114 == **3.3 Get Devices** ==
115
116 Reach out to your local representative to acquire the necessary devices for your Water Leakage & Doors Status Monitoring Solution.
117
118 These devices include:
119
120 * End Nodes: For door status and water leakage monitoring.
121 * Gateway: For data transmission.
122
123 Ensure that all devices are pre-registered on ThingsEye.io before use.
124
125
126 ----
127
128
129 = **3.4 Add new device** =
130
131 == **3.4.1 Add new device** ==
132
133 [[image:1742542021175-125.png]]
134
135
136 ----
137
138
139 == **3.4.2 Input device information** ==
140
141
142 For example, assuming you currently have a door sensor and a water leakage sensor, you can set it up as follows.
143
144 Care should be taken when adding devices:
145
146 * **Device IMEI:** Must be the Device EUI of the device.
147 * **Sensor Name: **Optional, and can be used as a differentiator. We recommend that named it with floor it installed and a certain sequence number. Only the Sensor Name will be displayed on the dashboard.
148 * Let **LDS02 **choose “Doors status alarm”，**LWL02 **choose “Water leakage alarm”.
149
150 [[image:1742542077379-266.png]]
151
152
153 ----
154
155
156 == **3.5 Connect the Gateway** ==
157
158 1. Connect the gateway to your router using an Ethernet cable.
159 1. Power on the gateway and allow it to obtain an IP address from the router. Ensure the gateway has a stable internet connection
160
161
162
163 ----
164
165
166 == **3.6 Connected Devices** ==
167
168 Once the gateway is connected, scan the code to register the device to the server. After registration, all registered end nodes will automatically connect to the network. You can verify their status on the platform. Back to Dashboards to confirm that devices are online and transmitting data correctly.
169
170 [[image:1742542242486-443.png]]
171
172
173 ----
174
175
176 == **3.7 Placement of Sensors** ==
177
178 === **3.7.1 LDS02 - LoRa WAN Door Sensor User Manual** ===
179
180 1. **Device Inspection: **Unbox the package and ensure it contains the LDS02 main unit, magnet, and mounting accessories.
181 1. **Battery Installation:** Open the device cover, insert two AAA batteries correctly, and check the polarity.
182 1. **Device Pairing: **Press the button on the device to enter pairing mode and connect it to the Lora WAN gateway.
183 1. **Choosing Installation Position: **Mount the main unit on the door frame and the magnet on the door. Ensure they align when the door is closed, with a gap of no more than 1 cm.
184 1. **Securing the Device:** Use screws or double-sided tape to fix both the main unit and the magnet in place.
185 1. **Function Testing:** Open and close the door several times to verify if the device detects and transmits status correctly.
186
187 For detailed installation steps and precautions, please refer to Dragino's official LDS02 User Manual.^^[2]^^
188
189
190 ----
191
192
193 === **3.7.2 LWL02 – LoRa WAN Water Leak Sensor User Manual** ===
194
195 1. **Insert Batteries: **Open the device casing and insert two AAA batteries to power the device.
196 1. **Select Installation Location:** Place the sensor in areas prone to water leakage, such as under pipes or near washing machines. Ensure a good LoRa WAN signal.
197 1. **Fix the Sensor (Two methods):**
198 11. Screw Mounting: Remove the device’s bottom cover, use screws to secure it through the mounting holes, then reattach the main body until it clicks intoplace. ^^,,[3],,^^
199 11. Adhesive Mounting: Use the provided adhesive tape, attaching one side tothedevice’s bottom and the other to the selected surface. [3]Screw Mounting: Remove the device’s bottom cover, use screws to secure it through the mounting holes, then reattach the main body until it clicks into place.^^ [3]^^
200 1. **Connect to Network: **The device comes with a unique LoRa WAN registration key and will automatically connect after powering on.
201 1. **Test the Device: **Pour a small amount of water in the detection area to check if the sensor detects leakage and transmits data.
202
203 For detailed installation steps and precautions, please refer to Dragino's official LDS02 User Manual.^^ {4]^^
204
205
206 ----
207
208
209 = **4. Options** =
210
211 == **4.1 Set door opened timeout alarm** ==
212
213 Click the bell icon to set how long the door should remain open before displaying"timeout". Given below is a example of 60s delay to alarm.
214
215 [[image:1742542535145-627.png]]
216
217
218 Before sixty seconds, the device will display an orange icon as a warning. [[image:1742542543895-938.png]]
219
220
221 A red alert will then be added after 60s.
222
223 [[image:1742542543896-223.png]]
224
225
226 Notes: Voltage thresholds below 2.7V typically indicate low battery on the device.
227
228
229 ----
230
231
232 == **4.2 Edit device’s property** ==
233
234 Editing Data Anytime to Match the Device in the Interface
235
236 [[image:1742542627811-539.png]]
237
238
239 ----
240
241
242 == **4.3 Delete device** ==
243
244 Devices can be deleted at any time from the removal button.( Caution: This action is irreversible.)
245
246 [[image:1742542666609-316.png]]
247
248 [[image:1742542693913-876.png]]
249
250
251 ----
252
253
254 == **4.4 Send email when alarm occurs** ==
255
256 This is the email button. The device with the recipient (+cc object) set will send an email to the recipient (&cc object) when alarm occurs.
257
258 [[image:1742542742534-795.png]]
259
260 [[image:1742542730443-741.png]]
261
262
263 ----
264
265
266 == **4.5 Search** ==
267
268 Search button is designed to conduct a search.
269
270 [[image:1742542770534-280.png]]
271
272
273 ----
274
275
276 = **4.6 Use of Tablet** =
277
278
279 For added convenience, you can use a tablet to access the ThingsEye.io platform. This allows for real-time monitoring and management of your food safety solution on the go.
280
281 * Download APP: Scan the QR code or click the link to download the app.
282
283 | |**QR code**|**Link**
284 |**Google Play**|[[image:https://wiki.thingseye.io/xwiki/bin/download/Main/%E2%80%8B%E2%80%8B%E2%80%8B%E2%80%8B%E2%80%8B%E2%80%8B%E2%80%8BThingsEye%20Food%20Safety%20Solution%20End%20User%20Guide/WebHome/1739501688627-693.png?rev=1.1||alt="1739501688627-693.png"]]|[[https:~~/~~/play.google.com/store/apps/details?id=com.teyiwulian.thingseye.app>>url:https://play.google.com/store/apps/details?id=com.teyiwulian.thingseye.app]]
285 |**APP Store**|[[image:https://wiki.thingseye.io/xwiki/bin/download/Main/%E2%80%8B%E2%80%8B%E2%80%8B%E2%80%8B%E2%80%8B%E2%80%8B%E2%80%8BThingsEye%20Food%20Safety%20Solution%20End%20User%20Guide/WebHome/1739501688627-907.png?rev=1.1||alt="1739501688627-907.png"]]|[[https:~~/~~/apps.apple.com/us/app/thingseye-io/id6739418014>>url:https://apps.apple.com/us/app/thingseye-io/id6739418014]]