How to register gateway to server

Version 3.1 by Hera Guo on 2024/12/20 11:26

1.Overview

When you receive the gateway, you need to register the gateway to the server for it to work properly, here are the instructions for registering the gateway to the server

2.Register to chirpstack（Semtech UDP for ChirpStack v4）

2.1 Configuring the Gateway

2.1.1 Connect to gateway wifi

Wi-Fi Name：dragino-xxxxx

Passphrase：dragino+dragino

2.1.2 Enter the gateway management interface

Ip address：http://10.130.1.1/

user ID：root

Passphrase：dragino

2.1.3 Configure the gateway to connect to wifi

If your gateway is networked with wifi, you need to configure the gateway's networking wifi as follows:

1734658621340-740.png
2.1.4 Configure the gateway

1734658928659-513.png

2.2 Connect to chirpstack

1734659369608-325.pngData URI imageArrow.pngData URI image1734659298484-499.pngData URI image

2.3 Checking gateway Status

1734659623077-444.png

3.Register to ttn

3.1  Primary LoRaWAN Server

3.1.1 Connect to gateway wifi

Wi-Fi Name：dragino-xxxxx

Passphrase：dragino+dragino

3.1.2 Enter the gateway management interface

Ip address：http://10.130.1.1/

user ID：root

Passphrase：dragino

3.1.3 Configure the gateway to connect to wifi

If your gateway is networked with wifi, you need to configure the gateway's networking wifi as follows:

1734658621340-740.png

3.1.4 Configure the gateway

Choose the first “The Things Network V3” for the service provider, and the first server address by default.

1734664186917-187.png

3.2 Register Gateway

1734664417355-796.pngArrow.png1734664568234-300.png

1734664986791-748.png

image-20231121092543-2.png

3.5 Show Status

After registering the gateway, you need to wait 2-3 minutes for it to display properly

1734665189901-142.png